Symmons Dia SLS3512PP Manual

Dia®
Model Numbers Feature Highlights
SLS3512PP
Single Handle Lavatory Faucet
Operation & Maintanence Manual
☐SLS3512PP Single Handle Lavatory Faucet with
Push Pop Drain Assembly
• Single hole mount configuration
• Quarter turn ceramic cartridge
• 23 inch braided hose water supply connections
• 7-1/8" height
• Standard 1.0 gpm (3.8 L/min) flow rate
• Faucet shall be metal construction, plated in standard
polished chrome finish
Compliance
-ASME A112.18.1/CSA B125.1
-NSF/ANSI/CAN 61: Q<1, NSF/ANSI 372
-WaterSense 1.0 gpm Certied by
IAPMO R&T
c
Limited Lifetime - to the original end
purchaser in consumer/residential
installations.
10 Years - for commercial/industrial
installations. Refer to
www.symmons.com/warranty for
complete warranty information.
Warranty
Step 2
Connect supply hoses
HOT COLD
Step 4
Flush lines and
check for leaks
Step 1
Attach faucet assembly
Optional
Adjust limit stop washer
to limit handle turn to the
hot position if desirable
1
2
3
Plumbers Putty L
Q
X
N
Y
O
M
Step 3:
Push Pop Install: Insert drain body (L)
into drain opening. From below, Tighten
locking nut (O) with gasket (M) and
washer (N) to ange. Tighten tail nut (Y)
with washer (X) to secure tail pipe (Q).
Do Not overtighten.
Quick Install Guide Dia Lavatory Faucet
HOT COLD
ON
OFF
+
-
Installation

Symmons Industries, Inc. ■31 Brooks Drive ■Braintree, MA 02184 ■Phone: [phone] ■ Fax: [phone]
Copyright © 2023 Symmons Industries, Inc. ■symmons.com ■[email protected]om ■ZV-3690 REV B ■ 071123
Dimensions
Hole size
1-1/4" (32 mm) min
1-1/2" (38 mm) max
Deck thickness
2-1/16" (52 mm) max
Deck plate
Hole size (2x)
1" (25 mm) min
1-1/2" (38 mm) max
4"
(102 mm)
Deck thickness
1-7/8" max
(48 mm)
Aerator kits
1.0 gpm (3.8 L/min)
0.5 gpm (1.9 L/min)
Cartridge with
limit stop
Part Number Item
Replacement Parts
RL325
RL-059-1.0
RL-059-0.5
includes aerator, retainer & washer
RL-066 * Handle kit
includes handle, allen
screw & button plug
requires 2.5 mm Allen wrench
Mounting hardware kit
RL-067 threaded studs (2)
hex nut (2)
rubber washer (1)
metal washer (1)
RL324 *Push Pop Drain Assembly
RL-081*4" Deck Plate (Optional)
aerator
aerator retainer
base gasket
mounting gasket
mounting plate
mounting nut
length: 27-1/2" (700 mm)
COLD: blue stripe
HOT: red stripe
3/8" compression
cap
retainer nut
cartridge
faucet body
handle
allen screw
button plug
Push pop-up drain
assembly
RL324*
2.5 mm wrench
Parts Assembly
*Note: For decorative finish faucets append the
appropriate sux code letters to part numbers
marked with an asterisk (*)
*
*
Parts Breakdown
Note: Dimensions subject to change without notice.
WARNING: This product can expose you to chemicals including lead, which is known to the state of California to cause cancer, birth
defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.