Target fairglen User manual

>>
© 2018 Target. The Bullseye Design is a trademark of Target Brands, Inc. All rights reserved.
fairglen
end table
assembly instructions
style # TGFGSDTBWH (white)
dpci # 249-17-2882
TCIN # 54158478

2
Congratulations on your latest Target purchase.
Now what? Don’t start sweating over this box of parts. This will be easy. We did the hard work for you.
All you need to do is follow our simple instructions and you’ll be on your way to transforming your
room in no time. Good luck—though we’re condent you won’t need it.
before you begin
1. Check for damaged or missing parts. Call 1-855-MYTGTHOME (855-698-4846) to order missing supplies.
2. Use the carton as a working surface to prevent product damage during assembly.
3. Read through and review assembly steps.
4. Gather all tools prior to assembly.
tools needed

3
table of contents
introduction 2
hardware 4
parts list 5
how to use the cam lock system 6
assembly 7-11
QUESTIONS? Just call 1-855-MYTGTHOME (855-698-4846) for parts and service. For faster service, have the style number and dpci number ready when calling.

4
hardware
(H1) x 18
wooden dowel
(H2) x 20
cam bolt
(H3) x 20
cam
(H4) x 4
at head screw

5
exploded diagram
ITEM DESCRIPTION QUANTITY
A top/bottom panel 2
B left side panel 1
C right side panel 1
D back panel 1
E shelf 1
F drawer front 1
G drawer left panel 1
H drawer right panel 1
I drawer back panel 1
J drawer bottom panel 1

how to use the cam lock system
1.
Screw cam bolt into panel
2.
Align cam bolt(s) with cam(s)
and insert all the way into
cross-bored hole(s)
3.
Push cam into panel - arrow feature
on cam top points to panel edge
4.
Rotate cam(s) clockwise 180° to
lock panels together
5.
Panels should be tight against each
other and connection should be rigid
6
4. 5.
1. 2. 3.

step 1: attach left side panel to back panel
(H1) x 2
wooden dowel
(H2) x 8
cam bolt
(H3) x 2
cam
1.1. Carefully tap small wooden dowels into place in left side panel. Leave 1/2” of the dowels sticking out.
1.2. Screw-In cam bolts must be screwed down ush in left side panel.
1.3. Refer to page 6 for instructions on how to use the cam lock system.
1.4. Do not over tighten bolts.
7
(H1) x 2
wooden dowel
(H2) x 8
cam bolt
(H3) x 2
cam

step 2: attach top panel, bottom panel, and shelf to left side panel
(H1) x 6
wooden dowel
(H3) x 6
cam
2.1. Carefully tap small wooden dowels into place in left side panel. Leave 1/2” of the dowels sticking out.
2.2. Screw-In cam bolts must be screwed down ush in left side panel.
2.3. Refer to page 6 for instructions on how to use the cam lock system.
2.4. Do not over tighten bolts.
8
nished edge
2.1. Carefully tap small wooden dowels into place in left side panel. Leave 1/2” of the dowels sticking out.
2.2. Screw-In cam bolts must be screwed down ush in left side panel.
2.3. Refer to page 6 for instructions on how to use the cam lock system.
2.4. Do not over tighten bolts.

step 3: attach right side panel
(H1) x 8
wooden dowel
(H2) x 8
cam bolt
(H3) x 8
cam
3.1. Carefully tap small wooden dowels into place in right side panel. Leave 1/2” of the dowels sticking out.
3.2. Screw-In cam bolts must be screwed down ush in right side panel.
3.3. Refer to page 6 for instructions on how to use the cam lock system.
3.4. Do not over tighten bolts.
9
(H1) x 8
wooden dowel
(H2) x 8
cam bolt
(H3) x 8
cam

10
step 4: assemble drawer box
(H1) x 2
wooden dowel
(H2) x 4
cam bolt
(H3) x 4
cam
(H4) x 4
at head screw
4.1. Carefully tap small wooden dowels into place in drawer front. Leave 1/2” of the dowels sticking out.
4.2. Screw-In cam bolts must be screwed down ush in drawer front.
4.3. Refer to page 6 for instructions on how to use the cam lock system. Do not over tighten bolts.
4.4. Slide drawer bottom into drawer side panels and front.
4.5. Align at head screws with pre-drilled holes to attach drawer back panel. Do not over tighten screws