Target Terrace Installation guide

>> assembly instructions
terrace
side table
style # 433 - 802 (black)
dpci # 249 - 03 - 0004

2
Congratulations on your latest Target purchase.
Now what? Don’t start sweating over this box of parts. This will be easy. We did the hard work for you.
All you need to do is follow our simple instructions and you’ll be on your way to transforming your
room in no time. Good luck—though we’re condent you won’t need it.
tools needed
before you begin
1. Check for damaged or missing parts. Call 1-800-xxx-xxxx to order missing supplies.
2. Use the carton as a working surface to prevent product damage during assembly.
3. Gather all tools prior to assembly.

3
QUESTIONS? Just call 855-MYTGTHOME (855-698-4846) for parts and service. For faster service, have the style number and DPCI number ready when when calling.
table of contents
introduction 2
hardware 4
parts list 6
how to use the cam lock system 7
assembly 8-31

4
hardware
(H1) x 4
large cam
(H2) x 2
small cam
(H3) x 8
cam cover cap
(H5) x 2
short cam bolt
(H4) x 4
long cam bolt
(H6) x 2
knob
(H7) x 4
large wooden dowel
(H8) x 2
small wooden dowel
(H10) x 1
allen wrench
(H9) x 1
glue
(H11) x 4
L-bracket
(H12) x 2
hinge
(H13) x 16
1/2” pan-head screw
(H15) x 2
7/8” pan-head machine screw
(H14) x 8
3/8” at-head screw
Glue

5
hardware
(H16) x 4
2” hex-head screw
(H17) x 4
1-1/4” at-head screw
(H18) x 12
1-1/8” washer-head screw
(H20) x 1
touch-up stick
(H19) x 35
nail
(H21) x 2 sets
drawer glides
(H22) x 1
magnetic catch
(H23) x 1
strike plate
(H25) x 1
strike plate screw
(H24) x 2
magnetic catch screw

6
ITEM DESCRIPTION QUANTITY
A top panel 1
B bottom panel 1
C right end panel 1
D left end panel 1
F base foot 4
G drawer front 1
H door 1
K upper side molding 2
K1 top front molding 1
M lower side molding 2
M1 center front molding 1
O back panel 1
P drawer bottom 1
T left drawer side 1
T1 right drawer side 1
T2 drawer back 1
M1
D
M
B
C
M
F
F
F
K
K
K1
H
A
O
P
T2
T1
T
G

7
1. 2. 3.
4. 5.
how to use the cam lock system
180°

8
step 1.
(H2) x 2
small cam
(H5) x 2
short cam bolt
(H8) x 2
small wooden dowel
(H9) x 1
glue
1. Carefully tap small wooden dowels into place. Leave 0.5” of the dowels sticking out.
2. Screw-in cam bolts must be screwed down ush.
3. Refer to page 7 for instructions on how to use the cam lock system.
T1 T
G
Glue
Glue
Glue

9
1. Make sure heads of screws are ush with drawer sides.
step 2.
(H17) x 4
1-1/4” at-head screw
T
T2
T1

10
step 3.
TT2
T1
P
Finished
Side

11
step 4.
1. Make sure drawer bottom inserts into drawer front groove and drawer back.
2. Refer to page 7 for instructions on how to use the cam lock system.
G
P
T
T1
T2
Glue
180°

12
1. Do not over tighten screws.
step 5.
(H14) x 4
3/8” at-head screw
(H21) x 2 sets
drawer glides
P
T
T2
T1
G

13
step 6.
(H6) x 1
knob
(H15) x 1
7/8” pan-head machine screw
G

14
step 7.
(H1) x 4
large cam
(H22) x 1
magnetic catch
(H24) x 2
magnetic catch screw
C
D

15
step 8.
1. Do not over tighten screws.
(H14) x 4
3/8” at-head screw
(H21) x 2 sets
drawer glides
C
D

16
step 9.
(H18) x 12
1-1/8” washer-head screw
1. Make sure the upper and lower side moldings are positioned as shown in the illustration above.
C
D
M
M
KK

17
step 10.
(H10) x 1
allen wrench
1. Make sure heads of screws are ush with bottom panel.
(H16) x 4
2” hex-head screw
D
C
B
Unnished
Side

18
step 11.
1. Carefully tap large wooden dowels into feet, using a hammer. Leave approximately 0.5” of the dowel sticking out.
2. Carefully tap feet into bottom panel using a hammer.
(H7) x 4
large wooden dowel
1.
2.
B
F
F
F
F
F
x 4
Glue
Glue

19
step 12.
1. Make sure slots in L-brackets are positioned as shown in the illustration above.
2. Loosely attach L-brackets to molding as shown.
(H11) x 2
L-bracket
(H13) x 2
1/2” pan-head screw
K1

20
step 13.
(H4) x 4
long cam bolt
1. Screw-in cam bolts must be screwed down ush.
A