Target BK5SHLFXEB User manual

>> assembly instructions
5 shelf bookcase
ebony
style # BK5SHLFXEB
dpci # 249-14-0021
espresso
style # BK5SHLFXES
dpci # 249-14-0022
midtone/cherry
style # BK5SHLFXMT
dpci # 249-14-0023
chestnut
style # BK5SHLFXCH
dpci # 249-14-0367
white
style # BK5SHLFXWH
dpci # 249-14-0048
rustic
style # BK5SHLFXBR
dpci # 249-14-1412

2
Congratulations on your latest Target purchase.
Now what? Don’t start sweating over this box of parts. This will be easy. We did the hard work for you.
All you need to do is follow our simple instructions and you’ll be on your way to transforming your
room in no time. Good luck—though we’re condent you won’t need it.
tools required
before you begin
1. Check for damaged or missing parts. Call 1-855-MYTGTHOME (855-698-4846) for parts and service.
2. Use the carton as a working surface to prevent product damage during assembly.
3. Gather all tools prior to assembly.

3QUESTIONS? Just call 1-855-MYTGTHOME (855-698-4846) for parts and service. For faster service, have the style number and DPCI number ready when calling.
table of contents
introduction
hardware
parts list
how to use the cam lock system
assembly
2
4
5
6
7-16

4
hardware
(H1) x 34
wooden dowel
(H2) x 27
cam bolt
(H3) x 27
cam
(H5) x 45
5/8’’ pan-head
screw
(H7) x 1
19mm pan-head screw
(H6) x 12
shelf support
(H9) x 2
5/8” washer
(H4) x 4
1’’ at-head
screw
(H10) x 1
wall anchor
(H11) x 1
wall screw
(H8) x 1
wall strap

5
ITEM DESCRIPTION QUANTITY
top panel
left side panel
right side panel
adjustable shelf
bottom panel
xed shelf center
xed center rear rail
xed center front rail
lower back panel
back panel
decorative molding
top front rail
bottom front rail
adjustable shelf rail
Z
Y
X
W
V
U
T
R
Q2
Q
J
I
H
E
1
1
1
3
1
1
1
1
1
1
1
1
1
3
U
Q2
Z
Y
W
W
W
HV
X
Q
E
E
R
E
J
I
T

6
how to use the cam lock system
1. 2. 3.
4. 5.
180º

7
1. Carefully tap small wooden dowels into place. Leave 1/2’’ of the dowels sticking out.
2. Screw-In cam bolts must be screwed down ush with wood panel.
3. Refer to page 6 for instructions on how to use the cam lock system.
step 1.
(H1) x 9
wooden dowel
(H2) x 6
cam bolt
(H3) x 6
cam
E
W
x3

8
1. Carefully tap small wooden dowels into place. Leave 1/2’’ of the dowels sticking out.
2. Screw-In cam bolts must be screwed down ush with wood panel.
3. Refer to page 6 for instructions on how to use the cam lock system.
step 2.
(H1) x 6
wooden dowel
(H2) x 4
cam bolt
(H3) x 4
cam
R
T
U
nished edge

9
1. Carefully tap small wooden dowels into place. Leave 1/2’’ of the dowels sticking out.
2. Screw-In cam bolts must be screwed down ush with wood panel.
3. Refer to page 6 for instructions on how to use the cam lock system.
step 3.
(H1) x 3
wooden dowel
(H2) x 2
cam bolt
(H3) x 2
cam
H
V

10
1. Carefully tap small wooden dowels into place. Leave 1/2’’ of the dowels sticking out.
2. Screw-In cam bolts must be screwed down ush with wood panel.
3. Refer to page 6 for instructions on how to use the cam lock system.
step 4.
(H1) x 6
wooden dowel
(H2) x 5
cam bolt
(H3) x 5
cam Y
T
U
R
H
V
I
front
nished edge

11
1. Carefully tap small wooden dowels into place. Leave 1/2’’ of the dowels sticking out.
2. Screw-In cam bolts must be screwed down ush with wood panel.
3. Refer to page 6 for instructions on how to use the cam lock system.
step 5.
(H1) x 6
wooden dowel
(H2) x 5
cam bolt
(H3) x 5
cam
X

12
1. Do not over tighten screws.
step 6.
J
(H4) x 4
1’’ at-head screw

13
1. Carefully tap small wooden dowels into place. Leave 1/2’’ of the dowels sticking out.
2. Screw-In cam bolts must be screwed down ush with wood panel.
3. Refer to page 6 for instructions on how to use the cam lock system.
step 7.
(H1) x 4
wooden dowel
(H2) x 5
cam bolt
(H3) x 5
cam
Z

14
1. Make sure screws go through pre-drilled holes properly.
2. Do not over tighten screws.
step 8.
(H5) x 45
5/8’’ pan-head screw
Q
Q2
!
WARNING
Seriousor fatal crushing injuries can occur
fromfurniture tip-over. To help prevent tip-
over:
-Installtip-over restraint provided.
-Placeheavy items on lower shelves and as
far back as possible.
-Placeheaviest items in the lowest drawers.
-Unlessspecifically designed to accommodate,
do not set TVs or other heavy objects on top of
this product.
-Neverallow children to climb or hang on drawers,
doors, or shelves.
-Neveropen more than one drawer at a time.
(OR)
-Donot defeat or remove the drawer interlock system.
Useof tip-over restraints may only reduce,
butnot eliminate, the risk of tip-over.
Thisisa permanent label. Do not remove.
hole for anti-tip strap
pre-drilled holes
pre-drilled
holes
Begin by installing all of the screws along one
edge of the back panel. Next, using a square
or tape measure, make sure that the cabinet is
square. (If using a tape measure, the distance
from one corner, diagonally to the other corner
should be the same in both directions.) Install
the remaining screws, starting with the corners.

15
1. Insert shelf support into desired hole. Different holes accommodate different shelf heights
2. Angle shelf to t between the rails and set on top of shelf supports.
step 9.
(H6) x 12
shelf support
W
E
W
E
W
E
Q
Q2

step 10.
Fasten anti-tip strap
with at-head screw provided
(H10) x 1
wall anchor
(H11) x 1
wall screw
(H8) x 1
wall strap
(H9) x 2
5/8” washer
(H7) x 1
19mm pan-head screw
(H11) (H9)
Position against wall
Mark position of strap hole on
wall
Drill 1/4’’ hole
Tap in wall anchor
(H10)
!
WARNING
Seriousorfatal crushing injuries can occur
fromfurnituretip-over. To help prevent tip-
over:
-Installtip-over restraint provided.
-Placeheavy items on lower shelves and as
far back as possible.
-Placeheaviest items in the lowest drawers.
-Unlessspecifically designed to accommodate,
do not set TVs or other heavy objects on top of
this product.
-Neverallow children to climb or hang on drawers,
doors, or shelves.
-Neveropen more than one drawer at a time.
(OR)
-Donot defeat or remove the drawer interlock system.
Useoftip-over restraints may only reduce,
butnoteliminate, the risk of tip-over.
Thisisa permanent label. Do not remove.
(H7)
(H9) (H8)
16

17
1. This unit has been designed for the weight shown. Exceeding this recommended weight could result in
excessive “sagging” of the top. Extreme overloading can cause failure of the top and possible injury.
2. Furniture Care Instructions: Dust with a clean, lint-free cloth. Use a spray furniture polish as needed.
QUESTIONS? Just call 855-MYTGTHOME (855-698-4846) for parts and service. For faster service, have the style number and DPCI number ready when calling.
!WARNING
Serious or fatal crushing injuries can occur
from furniture tip-over. To help prevent tip-
over:
- Install tip-over restraint provided.
- Place heavy items on lower shelves and as
far back as possible.
- Place heaviest items in the lowest drawers.
- Unless specifically designed to accommodate,
do not set TVs or other heavy objects on top of
this product.
- Never allow children to climb or hang on drawers,
doors, or shelves.
- Never open more than one drawer at a time.
(OR)
- Do not defeat or remove the drawer interlock system.
Use of tip-over restraints may only reduce,
but not eliminate, the risk of tip-over.
This is a permanent label. Do not remove.
65 lbs
per shelf

© 2014 Target. The Bullseye Design is a trademark of Target Brands, Inc. All rights reserved.