Teledyne waverunner xi-a series Parts list manual

Getting Started
Manual
WaveRunner®Xi-A
WaveRunner MXi-A
Series Oscilloscopes

WaveRunner® Xi-A / MXi-A
Series Oscilloscopes
Getting Started Manual
January 2013

700 Chestnut Ridge Road
Chestnut Ridge, NY, 10977-6499
Tel: [phone]
Fax: [phone]
teledynelecroy.com
© 2013 Teledyne LeCroy, Inc.All rights reserved.
Unauthorized duplication of Teledyne LeCroy documentation materials other than for internal sales and
distribution purposes is strictly prohibited. However, clients are encouraged to distribute and duplicate
Teledyne LeCroy documentation for their own internal educational purposes.
WaveRunner and Teledyne LeCroy are registered trademarks of Teledyne LeCroy, Inc. Windows is a
registered trademark of Microsoft Corporation. Other product or brand names are trademarks or requested
trademarks of their respective holders. Information in this publication supersedes all earlier versions.
Specifications are subject to change without notice.
Warranty
NOTE: THE WARRANTY BELOW REPLACES ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING
BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS, OR ADEQUACY FOR ANY
PARTICULAR PURPOSE OR USE. TELEDYNE LECROY SHALL NOT BE LIABLE FOR ANY SPECIAL, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES, WHETHER IN CONTRACT OR OTHERWISE. THE CUSTOMER IS RESPONSIBLE FOR
THE TRANSPORTATION AND INSURANCE CHARGES FOR THE RETURN OF PRODUCTS TO THE SERVICE
FACILITY. TELEDYNE LECROY WILL RETURN ALL PRODUCTS UNDER WARRANTY WITH TRANSPORT PREPAID.
The oscilloscope is warranted for normal use and operation, within specifications, for a period of three years
from shipment. Teledyne LeCroy will either repair or, at our option, replace any product returned to one of
our authorized service centers within this period. However, in order to do this we must first examine the
product and find that it is defective due to workmanship or materials and not due to misuse, neglect,
accident, or abnormal conditions or operation.
Teledyne LeCroy shall not be responsible for any defect, damage, or failure caused by any of the following:
a) attempted repairs or installations by personnel other than Teledyne LeCroy representatives or b)
improper connection to incompatible equipment, or c) for any damage or malfunction caused by the use of
non-Teledyne LeCroy supplies. Furthermore, Teledyne LeCroy shall not be obligated to service a product
that has been modified or integrated where the modification or integration increases the task duration or
difficulty of servicing the oscilloscope. Spare and replacement parts, and repairs, all have a 90-day warranty.
The oscilloscope's firmware has been thoroughly tested and is presumed to be functional. Nevertheless, it is
supplied without warranty of any kind covering detailed performance. Products not made by Teledyne
LeCroy are covered solely by the warranty of the original equipment manufacturer.
922138-00 Rev A
January 2013

Getting Started Manual
922138-00 Rev A i
B
TABLE OF CONTENTS
Safety Instructions .....................................................................................................1
Symbols................................................................................................................... 1
Precautions ............................................................................................................. 2
Operating Environment .......................................................................................... 3
Cooling.................................................................................................................... 3
Cleaning .................................................................................................................. 3
Power Consumption ............................................................................................... 4
Power and Ground Connections............................................................................. 4
Standby Power........................................................................................................ 5
Calibration .............................................................................................................. 5
When Your Oscilloscope is Delivered .........................................................................6
Check that You Have Everything............................................................................. 6
Maintenance Agreements ...................................................................................... 6
Windows License Agreement ................................................................................. 6
Power-Up and Installation .........................................................................................7
Power-Up................................................................................................................ 7
Software ................................................................................................................. 7
Adding a New Option.............................................................................................. 7
Restoring Software ................................................................................................. 7
External Monitor..................................................................................................... 8
Hardware Connections ........................................................................................... 8
Software ................................................................................................................. 9
Adding a New Option.............................................................................................. 9
Video Setup ............................................................................................................ 9
Probes .....................................................................................................................12
Front Panel Controls ................................................................................................14
Front Panel Buttons and Knobs ............................................................................ 15
Trigger Controls .................................................................................................... 15
Horizontal Controls............................................................................................... 16
Vertical Controls ................................................................................................... 16
Zoom Control Knobs ............................................................................................. 16
Special Features Controls ..................................................................................... 17

WaveRunner Xi-A and MXi-A Oscilloscopes
ii 922138-00 Rev A
Understanding Display Information .........................................................................19
Top Menu Bar (File Menu).................................................................................... 19
Grid Area............................................................................................................... 20
Trace Descriptors.................................................................................................. 21
Dialog Boxes ......................................................................................................... 22
Message Bar ......................................................................................................... 22
Alternative Access Methods ....................................................................................23
Top Menu Bar ....................................................................................................... 23
Mouse and Keyboard Operation .......................................................................... 23
Displaying Signals/Traces - Vertical Setup................................................................24
Turn On Channels ................................................................................................. 24
Coupling................................................................................................................ 25
Deskew ................................................................................................................. 25
Probe Attenuation ................................................................................................ 25
Bandwidth Limiting............................................................................................... 26
Averaging Your Signal ........................................................................................... 26
Interpolation Settings ........................................................................................... 26
Noise Filtering (ERES)............................................................................................ 26
Using Toolbar Shortcuts ....................................................................................... 26
Turning On Traces....................................................................................................28
Vertical Settings and Channel Controls ....................................................................30
Adjusting Sensitivity ............................................................................................. 30
Adjusting the Waveform's Position ...................................................................... 31
Sampling Modes ......................................................................................................32
WaveStream/Intensity.............................................................................................32
Timebase Setup .......................................................................................................33
Combining Channels ............................................................................................. 33
Triggering.................................................................................................................35
Simple Triggers ..................................................................................................... 35
Standard Triggers.................................................................................................. 38
SMART Triggers..................................................................................................... 39
Serial Trigger and Decode ........................................................................................40
Accessing Serial Decode Triggers.......................................................................... 40
Serial Decode and Decode Setup.......................................................................... 41
TriggerScan ........................................................................................................... 42

Getting Started Manual
922138-00 Rev A iii
B
Waveform Measurements .......................................................................................45
Measuring with Cursors........................................................................................ 45
Cursors Setup........................................................................................................ 46
Parameter Measurements .......................................................................................48
WaveScan™ Advanced Search and Analysis .............................................................50
WaveScan Signal Views ........................................................................................ 50
WaveScan Search Modes...................................................................................... 51
Parameter Measurements.................................................................................... 51
Sampling Mode..................................................................................................... 51
Parameter Analysis ..................................................................................................52
Trend Measurements ........................................................................................... 52
Track View ............................................................................................................ 52
JitterTrack View .................................................................................................... 52
Histograms...............................................................................................................53
Creating and Viewing a Histogram ....................................................................... 53
Display Formats .......................................................................................................58
Display Setup ........................................................................................................ 58
Persistence Setup ................................................................................................. 60
Zooming Waveforms ............................................................................................ 61
Turn Off Zoom ...................................................................................................... 63
Save and Recall ........................................................................................................64
Saving and Recalling Oscilloscope Settings........................................................... 64
Saving and Recalling Waveforms.......................................................................... 66
Printing and File Management.................................................................................70
Printing ................................................................................................................. 70
Managing Files...................................................................................................... 72
Documenting Your Work .........................................................................................73
Creating a LabNotebook Entry.............................................................................. 73
Waveform Math ......................................................................................................74
FFT Setup .............................................................................................................. 74
Pass/Fail Testing ................................................................................................... 76
Remote Control Operation.......................................................................................84
Standards.............................................................................................................. 84
Program Messages ............................................................................................... 84
Automation .............................................................................................................85
Standards.............................................................................................................. 85

WaveRunner Xi-A and MXi-A Oscilloscopes
iv 922138-00 Rev A
Utilities ....................................................................................................................86
Status.................................................................................................................... 86
Remote communication ....................................................................................... 86
Hardcopy .............................................................................................................. 88
Aux Output ........................................................................................................... 90
Setting the Date and Time .................................................................................... 91
Options ................................................................................................................. 92
Service .................................................................................................................. 92
Show Windows Desktop ....................................................................................... 92
Touch-Screen Calibration ..................................................................................... 93
Preferences........................................................................................................... 93
Acquisition ............................................................................................................ 95
Acquisition Status ................................................................................................. 97
System Recovery......................................................................................................98
About the Recovery Tool ...................................................................................... 98
Recovery Procedure.............................................................................................. 99
Restarting the Application after Recovery.......................................................... 101
Restarting the Operating System........................................................................ 102
Reference ..............................................................................................................104
Specifications...................................................................................................... 104
Certifications....................................................................................................... 104
Contact Teledyne LeCroy.................................................................................... 108
End-User License Agreement for Teledyne LeCroy X-Stream Software ............. 109
Windows®License Agreement ............................................................................ 117

Getting Started Manual
922138-00 Rev A 1B
Safety Instructions
This section contains instructions that must be observed to keep the
instrument operating in a correct and safe condition. You are required to
follow generally accepted safety procedures in addition to the precautions
specified in this section. The overall safety of any system incorporating this
instrument is the responsibility of the assembler of the system.
Symbols
These symbols appear on the instrument's front or rear panels and in its
documentation to alert you to important safety considerations.
CAUTION of damage to instrument, or WARNING of hazard to
health. Attend to the accompanying information to protect
against personal injury or damage. Do not proceed until
conditions are fully understood and met.
WARNING. Risk of electro-shock.
Measurement ground connection.
Safety (protective) ground connection.
Alternating Current.

WaveRunner Xi-A and MXi-A Oscilloscopes
2 922138-00 Rev A
Precautions
Use proper power cord. Use only the power cord shipped with this
instrument and certified for the country of use.
Maintain ground. This product is grounded through the power cord
grounding conductor. To avoid electric shock, connect only to a
grounded mating outlet.
Connect and disconnect properly. Do not connect/disconnect probes or
test leads while they are connected to a voltage source.
Observe all terminal ratings. Do not apply a voltage to any input (C1, C2,
C3, C4 or EXT) that exceeds the maximum rating of that input. Refer to
the front of the oscilloscope for maximum input ratings.
Use only within operational environment listed. Do not use in wet or
explosive atmospheres.
Use indoors only.
Keep product surfaces clean and dry.
Do not block the cooling vents. Leave a minimum six-inch (15 cm) gap
between the instrument and the nearest object. Keep the underside
clear of papers and other objects.
Do not remove the covers or inside parts. Refer all maintenance to
qualified service personnel.
Do not operate with suspected failures. Do not use the product if any part
is damaged. Obviously incorrect measurement behaviors (such as
failure to calibrate) might indicate impairment due to hazardous live
electrical quantities. Cease operation immediately and sequester the
instrument from inadvertent use.

Getting Started Manual
922138-00 Rev A 3B
Operating Environment
Temperature: 5 to 40 °C
Humidity: Maximum relative humidity 80% for temperatures up to 31 °C
decreasing linearly to 50% relative humidity at 40 °C.
Altitude: Up to 2,000 m
NOTE: Direct sunlight, radiators, and other heat sources should be taken into
account when assessing the ambient temperature.
Cooling
The instrument relies on forced air cooling with internal fans and vents. Take
care to avoid restricting the airflow to any part of the oscilloscope. Around the
sides and rear, leave a minimum of 15 cm (6 inches) between the instrument
and the nearest object. At the bottom, the oscilloscope feet (up or down)
provide adequate clearance.
CAUTION. Do not block oscilloscope vents. Always keep the area
beneath the oscilloscope clear of paper and other items.
The instrument also has internal fan control circuitry that regulates the fan
speed based on the ambient temperature. This is performed automatically
after start-up.
Cleaning
Clean only the exterior of the oscilloscope using a damp, soft cloth. Do not use
harsh chemicals or abrasive elements. Under no circumstances submerge the
instrument or allow moisture to penetrate it. Avoid electric shock by
unplugging the power cord from the AC outlet before cleaning.
CAUTION. Do not attempt to clean internal parts. Refer to qualified
service personnel.

WaveRunner Xi-A and MXi-A Oscilloscopes
4 922138-00 Rev A
Power Consumption
The instrument operates from a single-phase, 100 to 240 Vrms (+/-10%) AC
power source at 50/60 Hz (+/-5%), or single-phase 100 to 120 Vrms (+/-10%) AC
power source at 400 Hz (+/-5%).
No manual voltage selection is required because the instrument automatically
adapts to line voltage.
Depending on the accessories installed (front panel probes, PC port plug-ins,
etc.), the instrument can draw up to 340 Watts (340 VA) max - all 4 channel
models and 290 Watts (290VA) - all 2 channel models. Power consumption
during Standby State: 12 watts –all models.
NOTE: The instrument automatically adapts itself to the AC line input within
the following ranges:
Voltage Range: 90 to 264 Vrms 90 to 132 Vrms
Frequency Range: 47 to 63 Hz 380 to 420 Hz
Power and Ground Connections
The instrument is provided with a grounded cord set containing a molded
three-terminal polarized plug and a standard IEC320 (Type C13) connector for
making a line voltage and a safety ground connection. The AC inlet ground
terminal is connected directly to the frame of the instrument. For adequate
protection against electrical shock hazard, the power cord plug must be
inserted into a mating AC outlet containing a safety ground contact. Use only
the power cord specified for this instrument and certified for the country of
use.
WARNING.Any interruption of the protective conductor inside or
outside of the scope, or disconnection of the safety ground terminal
creates a hazardous situation. Intentional interruption is prohibited.
The oscilloscope should be positioned to allow easy access to the socket-
outlet. Power is completely removed from the oscilloscope by unplugging the
power cord from the AC outlet.
The power cord should be unplugged from the AC outlet if the instrument is
not used for an extended period of time.

Getting Started Manual
922138-00 Rev A 5B
CAUTION. The outer shells of the front panel terminals (CH1, CH2, CH3,
CH4, EXT) are connected to the instrument chassis, and therefore to the
safety ground.
WARNING. Interrupting the protective conductor inside or outside the
oscilloscope, or disconnecting the safety ground terminal, creates a
hazardous situation. Intentional interruption is prohibited.
Standby Power
The Power (Standby) button controls the operational state of the
oscilloscope. Press the button to switch the instrument On or into Standby
mode (Off).
Always use the Power button or the File > Shutdown menu option to execute a
proper shut down process and preserve settings before powering down.
Powering off does not disconnect the oscilloscope from the AC power supply.
The only way to fully power down the instrument is to shut down then unplug
the AC power cord from the outlet.
We recommend unplugging the instrument if it will be unused for a long
period of time.
Calibration
The recommended calibration interval is one year. Calibration should be
performed by qualified personnel only.

WaveRunner Xi-A and MXi-A Oscilloscopes
6 922138-00 Rev A
When Your Oscilloscope is Delivered
Check that You Have Everything
First, verify all items on the packing list or invoice copy have shipped. Contact
your nearest Teledyne LeCroy customer service center or national distributor
and report any missing or damaged items. We cannot be responsible for
replacement unless contacted immediately.
Maintenance Agreements
We offer a variety of services under the heading of Maintenance Agreements.
These give extended warranty and allow you to budget maintenance costs
after the initial three-year warranty has expired. Installation, training,
enhancements, and on-site repairs —among other services —are available
through special supplemental support agreements. Inquire at your Teledyne
LeCroy customer service center or national distributor.
Windows License Agreement
Teledyne LeCroy's agreement with Microsoft prohibits users from running
software on Teledyne LeCroy X-Stream oscilloscopes irrelevant to measuring,
analyzing, or documenting waveforms.

Getting Started Manual
922138-00 Rev A 7B
Power-Up and Installation
Power-Up
Press the power switch at the bottom-left, front of the oscilloscope to
turn power on or off. Hibernate mode is not supported.
CAUTION. Do not change the System standby and System hibernate
settings from Never (default) selections on the Windows® Power
Options screen.
Software
You can find out the oscilloscope's software and hardware configuration as
follows:
In the tool bar, touch Utilities. Then, in the dialog area, touch Status.
Adding a New Option
New software options can be added after purchasing a code and then enabling
the option on the oscilloscope. Call Teledyne LeCroy Customer Support to
place an order and receive the code.
Restoring Software
Restarting the Application
Upon initial power-up, the oscilloscope loads the instrument application
software automatically.
If you exit the application and want to reload it, touch the shortcut icon on the
desktop:

WaveRunner Xi-A and MXi-A Oscilloscopes
8 922138-00 Rev A
If you minimize the application, touch the desktop icon to maximize it:
Restarting the Operating System
If you need to restart the Windows® operating system, you must reboot the
oscilloscope by pressing the power switch, and then turning the power back
on after a ten-second wait.
External Monitor
Your WaveRunner Xi Series oscilloscope’s motherboard contains a dual-video
chip. This enables extension of the desktop over two monitors or to display a
clone of the oscilloscope screen on an external monitor.
For example, in extended mode, the scope can be showing the UI on the
internal monitor and another application like Excel® on the external monitor,
or vice versa. Or, turn the scope monitor off and view the scope UI only from
the external monitor if desired.
Hardware Connections
Numbers on the previous picture correspond as follows:
1. Mouse
3. RS-232-C Port
6. Ethernet Port
8. Speakers
2. Keyboard
4. Teledyne LeCroy
Bus (LBus)
7. USB Ports (4)
9. Line In
5. External VGA
Monitor

Getting Started Manual
922138-00 Rev A 9B
Software
The oscilloscope’s hardware and software configuration can be seen as
follows:
In the menu bar, touch Utilities.
In the dialog area, touch Status.
Adding a New Option
New software options can be added after purchasing a code and then enabling
the option on the instrument. Call Teledyne LeCroy Customer Support to place
an order and receive the code.
Monitor Hookup
Connect the external monitor to the VGA port on the side of the instrument
(4).
Plug in the monitor's power cord, and turn on the monitor.
Video Setup
After the system boots, configure the monitors as follows:
NOTE: A mouse is required for dual monitor use.
Minimize the oscilloscope UI by selecting File 
Minimize.

WaveRunner Xi-A and MXi-A Oscilloscopes
10 922138-00 Rev A
In the system tray portion of the task bar, click
the Intel® monitor icon.
From the Intel® extreme graphics2 for mobile
pop-up menu, select Graphics Properties…
From the Display Devices dialog, select a display
mode.
NOTE: In these dialogs the oscilloscope
monitor is referred to as Notebook, and the
external monitor as Monitor.
From the Primary Device drop-down menu, select
the primary display monitor (the one to show the
oscilloscope UI).
If the external monitor is considerably larger than
the oscilloscope’s monitor, you may want to make
it the primary device.
The monitor not selected as primary is
automatically shown in the Secondary Device
box.
This setting determines mouse
pointer movement from one
monitor to the other.
Drag and drop the monitor icons as desired. For
example, if the secondary monitor (2) is left of the
primary monitor (1), the monitor 2 icon should be
placed to the left of the monitor 1 icon.
The monitors may also be placed on top of the
other to arrange them vertically.

Getting Started Manual
922138-00 Rev A 11B
Click Display Settings and set the resolution
(screen area) and color palette for the external
monitor.
CAUTION. Do not change these
settings for the Notebook
(oscilloscope) monitor in order to maintain
proper oscilloscope display functionality.
Click OK.

WaveRunner Xi-A and MXi-A Oscilloscopes
12 922138-00 Rev A
Probes
Your WaveRunner Xi oscilloscope is supplied with one passive probe for each
channel. The supplied passive probe has a high-input resistance and low
capacitance make it ideal for general purpose probing of signals with
frequency content from DC through several hundred MHz. The supplied
passive probe has a large selection of connection accessories, supplied
standard with the probe and available from Teledyne LeCroy as optional
accessories.
Teledyne LeCroy also offers a variety of passive and active probes for use with
your WaveRunner Xi Series oscilloscope. Visit teledynelecroy.com for
specifications and ordering information.
Current
Probes
Current Probes measure the current passing through a wire. They do
not use the traditional probing style of placing a tip onto a test point.
Instead, a wire is placed inside of the jaw of the probe, which then
allows the probe to measure the current (in Amps).
Active
Probes
There are two different types of active probes: single-ended and
differential.
Single-ended: A single-ended active probe is associated with
measuring voltages at high frequencies. Measurement with an active
probe requires a test point and a ground point. The ground (also
called earth) acts as a zero reference for the test point measurement.
Differential: Differential active probes are like two probes in one.
Instead of measuring a test point in relation to a ground point (like
single-ended active probes), differential probes measure the
difference in voltage of a test point in relation to another test point.
Passive
Probes
Passive probes measure voltages at lower frequencies (<400 MHz).
They have higher input capacitance (input C) and do not need power
to operate (unlike active probes). At higher frequencies, higher input
capacitance loads the test circuit, attenuating the signal. This is why
active probes are used in high frequency applications. Passive probes
also measure voltage in reference to ground.
High
Voltage
Probes
These are active single ended probes that are designed to measure
high voltages (safely). They measure the voltage in reference to
ground.