Televes FIBREDATA User manual

FIBREDATA
Amplicador/ Multiplexor óptico con alimentación
Amplier / Multiplexer Optical with power supply unit
Refs. 769610, 769612
Art. Nr. OLTUPSWDMA, OLTUPSWDMA17
Este dispositivo se compone de: Un multiplexor de longitud de onda
(1550nm + 1490/1310nm), un amplicador óptico de tecnologíaYEDFA
y dos fuentes de alimentación intercambiables en un chasis formato
rack de 1U, diseñado para funcionar con las OLTs de la gama FibreData.
Las dos fuentes de alimentación son intercambiables en caliente
para proporcionar redundancia al amplicador óptico y OLTs (gama
FibreData).
This device comprises: A wavelength multiplexer (1550nm + 1490/
1310nm), an optical amplier with YEDFA technology and two
swappable power supplies in a 1U rack format, designed to work with
the OLTs of the FibreData range.
The two power supplies are hot-swappable to provide redundancy to
optical and OLTs (FibreData range).
Introducción / Introduction
Diagrama de bloques / Blocks diagram
Power
Optical IN
Optical DATA
Optical OUT

Condiciones generales de instalación
1. Lea las instrucciones.
2. Conserve estas instrucciones.
3. Preste atención a todas las advertencias.
4. Siga todas las instrucciones.
5. No utilice este aparato cerca del agua.
6. Limpie la unidad sólo con un paño seco.
7. No bloquee las aberturas de ventilación. Realizar la
instalación de acuerdo con las instrucciones del fabricante.
8. No lainstale cercade fuentes decalor tales comoradiadores,
registros de calor, estufas u otros aparatos (incluyendo
amplicadores) que produzcan calor.
9. No anule la característica de seguridad del enchufe
polarizado o con conexión a tierra. Un enchufe polarizado
tiene dos patillas planas, una más ancha que la otra. Un
enchufe con toma de tierra tiene dos patillas planas y una
tercera de conexión a tierra. La patilla ancha o la tercera
patilla, están pensadas para su seguridad. Si el enchufe
suministrado no encaja en su toma, consulte con un
electricista para que reemplace la toma corriente obsoleta.
10. Utilice solamente los aditamentos/accesorios especicados
por el fabricante.
11. No pise ni pellizque el cable de red; tenga especial cuidado
con los clavijas, tomas de corriente y en el punto del cual
salen del aparato.
12. Desenchufe este aparato durante las tormentas eléctricas
o cuando no lo utilice durante largos períodos de tiempo.
13. Use únicamente la carretilla, plataforma, trípode, soporte
o tableros especicados por el fabricante, o vendidos con
el aparato. Cuando se usa una carretilla, tenga cuidado al
mover el conjunto carretilla/aparatos para evitar lesiones
en caso de vuelco.
14. Solicite todas las reparaciones a personal de servicio
cualicado. Solicite una reparación cuando el aparato se
haya dañado de cualquiera forma, se ha derramado líquido
o han caído objetos dentro del aparato, el aparato ha sido
expuesto a la lluvia o humedad, no funciona normalmente,
o haya sufrido una caída.
Atención
Para reducir el riesgo de fuego o choque eléctrico, no exponer
el equipo a la lluvia o a la humedad.
El aparato no debe ser expuesto a caídas o salpicaduras de
agua. No situar objetos o recipientes llenos de líquidos, como
jarrones, sobre o cerca del aparato.
Cómo utilizar el equipo de forma
segura
La tensión de red de este producto ha de ser: 110-230V~
50/60Hz.
En el caso de que cualquier líquido u objeto caigan dentro del
aparato, debe de ponerse en contacto con el servicio técnico.
Para desenchufar elequipo de lared, tiresiempre dela clavija,
nunca del cable.
No enchufe el equipo a la red eléctrica hasta que todas las
demás conexiones hayan sido realizadas.
La toma de red eléctrica debe estar cerca del equipo y ser
fácilmente accesible.
No quitar la tapa del equipo sin desconectarlo de la red.
Precaución / Peligro de descarga eléctrica /
Desconecte todas las fuentes de alimentación
Instalación segura
La temperatura ambiente no debe superar los 45°C.
No situar el equipo cerca de fuentes de calor o en ambientes
de humedad elevada.
No situar el equipo donde pueda estar sometido a fuertes
vibraciones o sacudidas.
Deje un espacio libre alrededor del aparato para proporcionar
una ventilación adecuada.
No situar sobre el aparato fuentes de llama desnuda, tales
como velas encendidas.
Precauciones de conexionado óptico:
Tratar con sumo cuidado la punta desprotegida de los
conectores, pequeños arañazos, rascaduras, impurezas
y/o partículas de suciedad, aceites, grasas, sudor, etc..
Pueden degradar signicativamente la señal.
Para la limpieza de la punta de los conectores, frotar (sin
ejercer presión) con una toallita de limpieza con base
en alcohol isopropílico, especíca para la limpieza de
elementos ópticos. Antes de realizar la conexión dejar
secar totalmente el alcohol.
Reservar las tapas de conectores y capuchones de
los cables para futuras operaciones de extracción/
protección de los mismos.
Colocar siempre las tapas protectoras a los conectores
de los equipos que no estén conectados a cables para
evitar que el haz láser pueda alcanzar los ojos.
Evite en lo posible el encendido del transmisor sin tener
la bra conectada a dicho transmisor.
Precauciones de Seguridad
Aviso.-
Este producto emite un rayo de luz invisible láser.
Evite exponerse a la radiación láser. El uso de aparatos de
ayuda visual (por ejemplo binoculares, lupas, etc.) puede
aumentar el peligro a los ojos.
INVISIBLE LASER RADIATION
DO NOT WATCH DIRECTLY WITH
OPTICAL INSTRUMENTS
CLASS 1M LASER PRODUCT
Acorde a EN 60825-1: 2014
Emisión máxima de radiación láser:
20dBm_769610 / 17dBm_769612
Longitud de onda emitida: 1550nm
Precaución
- El uso de controles o ajustes, así como procedimientos
diferentes a los especicados en éste manual puede
provocar la exposición de partes del cuerpo a radiaciones
nocivas.
- Lea y siga las instrucciones en este manual
cuidadosamente, retenga éste manual para referencia
futura.
- No utilice los equipos de forma no conforme con estas
instrucciones de operación ni bajo cualquier condición
que exceda las especicaciones ambientales estipuladas.
- El usuario no puede dar servicio técnico a estos
equipos. Para asistencia técnica contacte con nuestro
departamento de asistencia técnica.
- El rayo láser no debe ser apuntado a las personas y/o
animales intencionadamente.
Equipo clase A
Este es un equipo de Clase A. En un entorno doméstico este
equipo puede causar interferencias de radio, en cuyo caso se
puede requerir que el usuario tome las medidas adecuadas.
Simbología
Equipo diseñado para uso en interiores.
Precaución, peligro
de descarga eléctrica.
El equipo cumple los requerimientos del
marcado CE.
ES Importantes instrucciones de seguridad
Caution Statements
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance
with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including ampliers)
that produce heat.
9. Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding type plug has two
blades and a third grounding prong. The wide blade or the
third prong are provided for your safety.When the provided
plug does not t into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Only use attachments/accessories specied by the
manufacturer.
11. Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the
point where they exit the apparatus.
12. Unplug this apparatus during lightning storms or when
unused for long periods of time.
13. Use only with the cart, stand, tripod, bracket, or table
specied by the manufacturer, or sold with the apparatus.
When a cart is used, use caution when moving the cart/
apparatus combination to avoid injury from tip-over.
14. Refer all servicing to qualied service personnel. Servicing
is required when the apparatus has been damaged in any
way, liquid has been spilled or objects have fallen into
the apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.
Warning
Reduce the risk of re or electric shock, do not expose this
apparatus to rain or moisture.
Apparatus shall not be exposed to dripping or splashing and
no objects lled with liquids, such as vases, shall be placed
on the apparatus.
Safe operation
Power requirements for this product are 110-230V~ 50/60
Hz.
Should any liquid or object fall into the equipment, please
refer to qualied personnel for service.
To disconnect the equipment from the mains pull the plug
never the cable.
It is strongly recommended not to connect the equipment to
the mains until all connections have been done.
Do not connect the equipment to the mains until it has been
screwed to the wall.
The socket outlet shall be installed near the equipment and
shall be easily accessible.
Do not take the cover o the equipment without
disconnecting it from the mains.
Caution / Shock hazard /
Disconnect all power sources
Safe installation
Ambient temperature should not be higher than 113°F.
Do not place the equipment near heat sources or in a highly
humid environment.
Do not place the equipment in a place where it can suer
vibrations or shocks.
Please allow air circulation around the equipment.
Do notplace naked ames,such aslighted candleson ornear
the product.
Handling optical connections:
An SC/APC single mode ber cable must be used.
Remove the protective cover from the optical connector
on the unit and the cap on the cable connector.
Carefully align the guides on both connectors
when plugging a cable to the device, then push the
connector all the way in.
Take special care to avoid damaging the unprotected
ends of the connectors, as small scratches, impurities
and/or particles of dirt, oil, grease, sweat, etc. may
signicantly aect the quality of the signal.
To clean the ends of the connectors, gently rub with
a lint-free lens cleaning cloth, dampened using
additive-free isopropyl alcohol. Make sure the alcohol
evaporates fully before connecting. Keep the connector
covers and cable caps in a safe place in case they are
needed in the future. Always t the covers on the
connectors of devices that are not connected to cables
to prevent the laser beam from damaging the eyes.
Do not turn the transmitter on without a ber optic
cable connected to it.
Safety precautions
Warning.-
This product emits an invisible laser beam. Avoid contact
with laser radiation. The use of equipment such as
binoculars or magnifying glasses may increase damage
caused to the eyes.
INVISIBLE LASER RADIATION
DO NOT WATCH DIRECTLY WITH
OPTICAL INSTRUMENTS
CLASS 1M LASER PRODUCT
According to EN 60825-1: 2014
Maximum Output:
20dBm_769610 / 17dBm_769612
Emitted Wavelength (s): 1550nm
Caution
The use of the equipment in any other way than the
specied in this manual may lead to exposure to
harmful radiation.
Do not use the equipment in any way that does not
comply with the operating instructions or in any
conditions that exceed the stipulated atmospheric
specications.
Never point the laser beam at people or animals.
Class A equipment
EU
Class A equipment. In a domestic environment this equipment
may cause radio interference, in that case the user may be
required to take adequate measures..
EEUU
This equipment has been tested and found to comply
with the limits for a Class A digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential
areais likelyto cause harmfulinterferencein whichcase theuser
will be required to correct the interference at his own expense.
Symbology
Equipment designed for indoor use.
Caution, risk of
electrical shock.
The equipment complies with the
requirements of the CE mark.
EN Important Safety Instructions

1 2
Fuente dual intercambiable en caliente
Dual hot Swapping OLT power supply
* Incluye 2 cables
2 Cables included
*
1.- Conexión a la red PSU1
PSU1 Mains connection
2.- Conexión a la red PSU2
PSU2 Mains connection
OPTICAL OUT
OPTICAL DATA
YEDFA OPTICAL AMPLIFIER
24Vdc
PWR SYSTEM ALARM
SYSTEM
OK
OPTICAL IN
OPTICAL IN ALARM
PSU1
PSU2
12367 84 5
12367 84 5
RTN-48V
RTN-48V
12
45810 12
367911
RTN-48V
MADE IN SPAIN
EN 60825-1: 2014
INVISIBLE LASER RADIATION
DO NOT WATCHDIRECTLY WITH
OPTICAL INSTRUMENTS
CLASS 1M LASER PRODUCT
1.- Salida auxiliar 24 Vdc, 4W max
Auxiliary, 24 Vdc output max 4W
2.- LED de estado (verde cuando está OK)
Status LED OK (green when system is OK)
3.- Alarma
LED system error indication
4.- LED de encendido
Power LED
5.- Alarma de entrada óptica
LED optical input alarm
6.- Entrada RF overlay
Input RF overlay
7.- Puertos conexión OLT
OLT connection ports
8.- Puertos conexión red GPON
GPON network connection ports
9.- Funcionamiento de la fuente de alimentación PSU2 OK
Operation of PSU2 power supply unit, OK
10.- Funcionamiento de la fuente de alimentación PSU1 OK
Operation of PSU1 power supply unit, OK
11.- Salida de alimentación PSU2 (-48 V )
PSU2 power output (-48 V )
12.- Salida de alimentación PSU1 (-48 V )
PSU1 power output (-48 V )
Descripción de producto/ Mechanical overview:
Descripción panel frontal/ Front panel description
5
Optical in
alarm
2
System OK
3
System
alarm
Resultado/result
OFF No hay potencia óptica de entrada RF/
No RF input optical power
OFF OFF
Hay potencia óptica de entrada RF y fallo
en el sistema/ RF optical input power and
system failure
OFF OFF Funcionamiento correcto/
Correct operation
Fuente de alimentación / Power supply unit
Panel trasero/ Rear panel
Instalación con OLT / OLT installation
RTN
-48V

2018 © Copyright, Televés S.A.
Especicaciones técnicas / Technical specications
769610
OLTUPSWDMA
769612
OLTUPSWDMA17
Ópticas
Optical
Número de puertos / Number of ports
1 RF Overlay @ Optical IN
8 GPON @ Optical DATA
8 (GPON + RF Overlay) @ Optical OUT
Longitud de onda de trabajo
Operating wave length nm
1310 ± 20 @ Upstream
1490 ± 20 @ Downstream
1548 ...1565 @ RF Overlay
Entrada RF Overlay / Input RF overlay dBm -10 … +10
Potencia de salida RF overlay
Output power RF overlay dBm 20 @ 1550 nm 17 @ 1550 nm
Uniformidad / Uniformity dB 0,5
Figura de ruído / Noise gure dB 5 (Pin= 0 dBm @ 1550 nm)
Pérdida de insercción (1310 &1490nm)
Insertion loss (1310 &1490nm) dB <1
Conectores entrada-salida / Optical conector SC/APC
Pérdidas de retorno / Return loss dB >40
Fuente de alimentación
Power supply unit
Tensión entrada / Input power V~ 110 - 230
Frecuencia / Frequency range Hz 50/60
Consumo máx. entrada / Max. input consumption A~ 4,8 Por módulo/ Per module
Eciencia / Eciency % 89
Tensión de salida / Output voltage * V -48 Por módulo / Per module
Corriente máx. salida / Max. output current * A 7,1 Por módulo / Per module
Potencia máx. salida / Max. output power * W 340 Por módulo / Per module
Rizado y ruído / Ripple and noise mVp-p 240
Temperatura de funcionamiento
Wornking temperature ºC / ºF -5 ... + 45 / + 23 ... + 113
Humedad funcionamiento / Humidity % 10... 95
General
Dimensiones / Dimensions mm / in 483 x 43 x 402 / 19.02”x 1.69”x 15.83”
Peso / Weight g / lb 6200 / 13,67
Índice de protección / IP Code IP 20
* Salida auxiliar / Auxiliary output: 24V / 170 mA / 4 W
DECLARACIÓN DE CONFORMIDAD DECLARATION OF CONFORMITY DECLARAÇÃO DE CONFORMIDADE DECLARATION DE
CONFORMITE DICHIARAZIONE DI CONFORMITÀ DEKLARACJA ZGODNOŚCI KONFORMITÄTSERKLÄRUNG ΠΙΣΤΟΠΟΙΗΤΙΚΟ
ΣΥΜΜΟΡΦΩΣΗΣ FÖRSÄKRAN OM ÖVERENSSTÄMMELSE ДЕКЛАРАЦИЯ СООТВЕТСТВИЯ   https://doc.televes.com
Televes S.A guarantees this product as
per legislation applicable for this type of
product at the time and in the country of
purchase.
(A)Televes warrants, only to the original Purchaser,
all Products be free from any defect in materials
or workmanship for a period of two (2) years from
the date of original purchase, unless otherwise
specied.
(B) Televes shall, free of charge and in its sole discretion,
either repair, replace with a new or factory
reconditioned equivalent, or refund the purchase
price of the Product(s), that has been determined by
Televes to be defective in material or workmanship,
subject to the limits of this warranty.
(C)This warranty excludes any damage or inoperability
resulting from:
(I) use or installation that is not in strict compliance
with the written instructions and specications;
(II) any modication or alteration performed by any
third party not authorized in writing by Televes;
(III) service or repair performed by any third party not
authorized in writing byTeleves;
(IV) misuse, abuse, intentional harm, or lack of
reasonable care;
(V) re, ice, snow, rain, wind, water, volcano,
excessive heat or cold, lightning, ood, power
surge, earthquake, or any other acts of God;
(VI) war, crime, strike, riot, electro-magnetic pulse,
or any other acts beyond the control ofTeleves;
(VII) shipping.
(D) All claims under the terms of this warranty must be
made in writing, by the original Purchaser, within
fourteen (14) days of the defect being known to
the Purchaser. Such claims shall be accompanied
by a description of any material facts related to
the claimed defect and the invoice or other proof
of original purchase date and price. If Televes so
requests, the Purchaser shall, at Purchaser’s expense,
deliver the claimed Product(s) to Televes, within 14
days of the date of the return authorization. Under
no circumstances shall the Product(s) be returned to
Televes without a return authorization.
(E) Any refund to the Purchaser, shall be limited to
the purchase price of the Product(s), excluding any
applicable taxes, duties, freight costs, removal costs,
installation costs, or any other charges incident to
the purchase of the product.
(F) Any damage caused by shipper shall be claimed with
the shipper in accordance with the shipper’s policies
and procedures.
(G) Televes shall in no event and under no circumstances
be liable or responsible for any consequential,
indirect, incidental, punitive, direct or special
damages based upon breach of warranty, breach
of contract, negligence, strict tort liability or
otherwise or any other legal theory, arising directly
or indirectly from the sale, use, installation or failure
of any product acquired by Purchaser fromTeleves.
(H) This limited warranty extends to the original
Purchaser and cannot be assigned or transferred to
any other party without the prior express written
permission of Televes, which permission Televes may
withhold for any reason or for no reason at all.
(I) Televes will not assume any liabilities for any other
warranties, whether statutory, express or implied,
made by any other person.
(J) Televes reserves the right to modify or discontinue
this warranty at Televes’ sole discretion without
notication. No other warrantees are expressed or
implied.
Televes Limited Warranty
NOTE:This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual,
may cause harmful interference to radio communications. Operation of this equipment in a residential area is
likely to cause harmful interference in which case the user will be required to correct the interference at his own
expense.
Responsible party:
Televes USA LLC. Norfolk Tech Center 16596 E. 2nd Avenue Aurora, CO 80011
Telephone: [phone] [e-mail]
Fabricante / Manufacturer:
Televés S.A. Rúa B. de Conxo, 17 - 15706 Santiago de Compostela, A Coruña. Spain
www.televes.com