Telstra T1000S User manual

HOW TO USE YOUR TELSTRA T1000S TELEPHONE FEATURES
IMPORTANT SAFETY INSTRUCTIONS
Do not use the telephone during an electrical storm as it is possible to
get a shock.
Refer to the Telstra White Pages directory for further information.
RENTAL TERMS AND CONDITIONS
RENTAL TELEPHONE FAULTS
CARE OF THE TELEPHONE
Standard Rental Telephone
User Guide
www.telstra.com
Telstra T1000S
To fully benefit from the features of this Australian designed and manufactured telephone,
please read the User Guide and keep handy for future reference.
For any faults call 13 22 3 for residential or 13 2255 for business customers or refer to the
White Pages Directory.
©COPYRIGHT 2003 Telstra Corporation Limited This work is copyri ht.
All ri hts reserved. This document is subject to conditions prescribed under the Copyri ht Act.
® Re istered trade mark of Telstra Corporation Limited ABN 33 051 775 556
To Use Call Back When a N mber is B sy1
Using Telstra Voice Assistant2
Telstra Voice Assistant can help you activate and de-activate Telstra Phone Features, eg
Call Waiting and Call Forward.
This feature enables you to arrange an automatic call back to a busy number.
When you hear press
press
To Cancel Call Back
press
 Avoid hard knocks and do not drop the telephone.
 Keep the telephone away from heaters.
 Clean the telephone with a damp cloth. Do not use detergents or immerse the
telephone in water.
 The performance of the telephone may be affected by electro-magnetic interference
if placed near radio transmitters, diathermy machines, welding machines etc.
1 Applicable usa e char es and call costs apply. Available most areas.
2 Telstra Voice Assistant will be available from June 2003, subject to terms
and conditions available from Telstra.
T1000SAUG/06/03
Your rental telephone is subject to the terms and conditions set out in the Standard Form
of Agreement that is available from most Telstra Shops. OR visit www.telstra.com.au/sfoa

GETTING STARTED
When you unpack the telephone you will need to ensure the cords are placed
in the slots in the base as per diagram below.
Connect the telephone to a line, lift the handset and check for dial tone. This
ensures the telephone is powered up and will ring correctly.
Repeat this step whenever the telephone has been disconnected
from the line.










1. Ringer and earpiece volume level
2. Redial button - used to easily redial
the last number dialled
3. Store button - used to store numbers in
one touch memories. This button is also
used to adjust ringer volume
4. Telstra Voice Assistant button - for voice
activation/de-activation of phone
features
. 1 One Touch Memory buttons
6. Double sided memory card, lift clear
window
7. One Touch phone feature buttons
8. One Touch MessageBank button
9. Recall button - used to make an enquiry
call
10.Cancel button - used to turn off phone
features eg Call Wait
A wall-mounting bracket can be
purchased separately from Telstra.
Handset park groove is
located at the top edge of
the telephone
Handset hook is set in
position by rotating the dial
Handset cord clamp
An additional line
socket is located at
the rear to allow
connection of other
ACA equipment, eg
answering machine,
extension ringer or
modem
Wall mounting diagram
Wall Mo ntingT1000S Explanatory Diagram
Setting will be saved. Confirmation tone will
stop at min or max setting.
Adjusts the handset earpiece volume to one of four levels.
Confirmation tone will stop at min or max setting.
TELEPHONE OPERATION
Adj sting the Ringer Vol me When the Telephone is Idle
The ringer has two levels, high and low.
Press then or
Adj sting the Ringer Vol me When the Telephone is Ringing
Press or
Adj sting the Handset Earpiece Vol me Setting
Press or
Note: The earpiece volume will reset to normal when the handset is replaced.
The T1 S also provides a magnetic coupling in the handset for use with hearing aids with a
T position switch.
4
79
8
56

You Can Store Your PIN Under the MessageBank® Button
\
Press press
Press Press
Press Press Memory Button
To Change Your MessageBank® Access Number and PIN to Access Other Messaging Services
Press Select and press
This feature allows you to answer a second call when you are on the phone.
When you are on a call and you hear two beeps:
Press to swap between callers.
Press to hang up one caller and return to the caller on hold.
Press to talk to both callers at the same time1.
OW TO USE YOUR TELSTRA T1000S TELEP ONE FEATURES
To Turn on Call Forward2
USING MESSAGEBANK®1
To Turn on Call Waiting
To Forward Calls to a Number Stored in Memory
Note: ang up after programming each Memory button. Use 3-Way Chat button to enter a
1.5 second pause if required.
To end 3-Way Chat
press
Press Press
To Turn Off Call Forward
If you are a MessageBank® user, its now even easier to retrieve your messages. Your T1000S is
programmed to access Telstra ome Messages 101 and MessageBank.
To Retrieve a Message from Your MessageBank®
press
Last Number Redial
press This redials the last number dialled.
Dialling from Memory
Select and press Memory
Programming the 10 Memory Buttons
and select and press
Storing the Last Number Dialled into Memory
Note: A PIN is not required for Telstra ome
Messages 101
Press
To Delete your PIN
To Retrieve a Message from Your MessageBank® When You ave Stored Your PIN
press wait for the password prompt, press
You can change the programmed number to access other messaging services,
eg MessageBank Virtual & MessageBank Combined.
press press enter access number press
This feature enables you to establish a 3 way conversation.
This feature enables you to forward your calls to your mobile or another other selected number.
Press
To Use Call Return3
Press Press to connect.
This enables you to check the number of your last unanswered call (*10#)
1. Monthly call charges may apply
To Turn Off Call Waiting
Press
To Make an enquiry Call While You are on a Call
This feature enables you to call a second person while you are on a call.
During a call press To return to first caller after the second
person hangs up, press otherwise press to end the second call.
To ave a 3-Way Chat1
1. Applicable call costs and usage charges apply. Available most areas.
2. Applicable call costs apply for forwarded calls. Calls can be forwarded to most numbers in Australia.
3. Not available for blocked calls. Available most areas.