Tennsco WBD-25 Instruction Manual

RETAIN INSTRUCTIONS FOR FUTURE REFERENCE!
TO OBTAIN PROPER REPLACEMENT PARTS, PLEASE PROVIDE THE FOLLOWING INFORMATION:
Model Number Purchase Date
Description of part(s) needed and part Your company name
number(s) as shown in Parts List (above) Contact person's name
Color (i.e. Medium Grey, Sand, etc.) Company the product was purchased from
Was item missing, or was it damaged?
Tennsco Corp., P.O. Box 1888, Dickson, TN 37056-1888 E-mail address: [email protected]
Customer Service: [phone] Fax: [phone]
If requesting parts by telephone, ask for customer service and have as much of the above information ready as possible.
ASSEMBLY INSTRUCTIONS & PARTS MANUAL #2730212
Tennsco Corp., Dickson, TN 37056-1888 • [phone]
WBD-25 Workbench Drawer Installation
LIMITED WARRANTY
Tennscowarrantsgoodspurchasedhereundertobefreeofdefectsinmaterialsandworkmanshipforaperiodofone(1)yearfromthedateofshipment,hereunder.
This warranty shall not apply in the event goods are damaged as a result of misuse, abuse, neglect, accident, improper application, modification or repair by
persons not authorized by Seller, where goods are damaged during shipment, or where the date stamps on the goods have been defaced, modified or removed.
UNLESS CONSIDERED UNENFORCEABLE OR UNLAWFUL UNDER APPLICABLE LAW:
a. ALL IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO WARRANTIES OR MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE ARE HEREBY EXCLUDED:
b. BUYERS REMEDY, IF ANY, FOR ANY DEFECTIVE GOODS SHALL BE LIMITED TO A REFUND BY SELLER OR REPLACEMENT OF THE GOODS
AT SELLER’S OPTION, AND SHALL IN NO EVENT INCLUDE DAMAGES OF ANY KIND, WHETHER INCIDENTAL, CONSEQUENTIAL OR
OTHERWISE.
NOGOODSACCEPTEDFORRETURNWITHOUTPRIORAPPROVAL. SellershallhavetherighttoinspectanygoodsclaimedtobedefectiveatBuyersplace
of business or require Buyer to return the goods to Seller for inspection on Seller’s premises. Transportation charges covering returned goods will be borne
by Seller only if such goods are proven to be defective, are covered by this warranty and are returned within the warranty period stated above.
TENNSCO Corp., P.O. BOX 1888, DICKSON, TN 37056-1888
[phone] or [phone] (toll free)
Website: www.tennsco.com E-mail: [email protected]
REF. NO. DESCRIPTION QTY. PART NO.
Some parts may have sharp edges. CARE must be taken when handling various pieces to avoid injury. For
safety, wear a pair of work gloves when assembling or performing any maintenance on packing table.
11
76
5
2
3
4
PK-2730212
Tennsco makes every effort to ensure that all units ship complete with all parts and arrive undamaged. However,
should your unit contain missing or damaged parts, replacements may be obtained directly from Tennsco. To obtain
proper replacement parts, follow the instructions below: (or fill out the form at www.tennsco.com/replacement.cfm)
1 WorkBench Drawer Mount 2 WBSR-XX
2 LH Suspension Bracket Assembly 2 ****
3 RH Suspension Bracket Assembly 2 ****
4 Drawer 1 ****
5 Rear Cross Brace 1 ****
61/4-20 Nut 4 Nut
71/4-20 x 1/2Bolt 16 Bolt
REPLACEMENT PARTS

Steel Top
WBSR-XX
Left Hand
Suspension
Bracket Assembly
Rear Cross
Brace
1/4-20 x 1/2Bolt 1/4-20 Nut
1/4-20 x 1/2Bolt
1. Install WBSR-XX running front to back as shown using two 1/4-20 x 1/2bolts.
2. Attach Left Hand Suspension Bracket Assembly to WBSR-XX using four 1/4-20 x 1/2bolts. Attach
Rear Cross Brace using two 1/4-20 x 1/2bolts and nuts.Repeat steps for Right Hand Suspension
Bracket Assembly.
3. Extend both suspensions out completely and move the ball cage part of the middle suspension member to
the front.
22
1
/
4
" center to center of
WBSR-XX mounting bolt
READ INSTRUCTIONS CAREFULLY BEFORE
ATTEMPTING TO ASSEMBLE THE PACKING TABLE
4. Next, carefully insert the drawer with the inner suspension memeber attached into the ball cage of the middle
section of the suspension and gently close the drawer.
5. Cycle the drawer in and out a few times to check operation. The drawer and suspensions have a 50 pound weight
capacity rating.