
Approval and Certication
Product
产品名称
testo 915i
Mat.-No.
型号
0560 1915
Date
日期
20.01.2021
The use of the wireless module is subject to the regulations
and stipulations of the respective country of use, and the
module may only be used in countries for which a country certi-
cation has been granted. The user and every owner has the
obligation to adhere to these regulations and prerequisites for
use, and acknowledges that the re-sale, export, import etc. in
particular in countries without wireless permits, is his responsi-
bility.
Country Comments
Australia E 1561
Canada IC ID: 6127B-05601915
See ISED Warnings
Europa +
EFTA
The EU Declaration of Conformity can be
found on the testo homepage www.testo.
com under the product specic downloads.
EU countries:
Belgium (BE), Bulgaria (BG), Denmark (DK),
Germany (DE), Estonia (EE), Finland (FI), France
(FR), Greece (GR), Ireland (IE), Italy (IT), Latvia
(LV), Lithuania (LT), Luxembourg (LU), Malta
(MT), Netherlands (NL), Austria (AT), Poland
(PL), Portugal (PT), Romania (RO), Sweden (SE),
Slovakia (SK), Slovenia (SI), Spain (ES), Czech
Republic (CZ), Hungary (HU), United Kingdom
(GB), Republic of Cyprus (CY).
EFTA countries:
Iceland, Liechtenstein, Norway, Switzerland
WEEE Reg. no.:
DE 75334352
Hongkong Authorized
Turkey Authorized
USA
FCC ID: WAF-05601915
See FCC Warnings
Bluetooth®-
Information
Feature
特征与参数
Values
数值
Bluetooth®- Range
范围
up to150m (490 feet)
(free eld /无障碍场地)
radio type
型号
Bluetooth® Low
Energy (BLE) 4.2
company
制造商
LSD Science &
Technology Co., Ltd
Lierda LSD4BT_S37
RF Band
射频频段
2402 – 2480MHz
power output
输出功率
13,70dBm
Bluetooth®-
SIG Listing
Feature
特征与参数
Values
数值
Declaration ID D043363
member company Testo SE & Co. KGaA
EU SAR Information
The SAR limit of Europe is 2.0 W/kg. The highest SAR value
reported for 0560 1915 under testing standard for use in hand
is 0.275W/kg.
This device and its antenna(s) must not be co-located or ope-
rating in conjunction with any other antenna or transmitter.
ISED Warnings
CAN ICES-003(B)/NMB-003(B):
This Class B digital apparatus complies with Canadian ICES-
003.
Cet appareil numérique de la classe [B] est conforme à la
norme NMB-003 du Canada.
RSS-Gen & RSS-247 statement:
This device complies with Industry Canada licence-exempt
RSS standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interfe-
rence that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d‘Industrie Canada
applicables aux appareils radio exempts de licence.
L‘exploitation est autorisée aux deux conditions suivantes :
(1) l‘appareil ne doit pas produire de brouillage, et
(2) l‘utilisateur de l‘appareil doit accepter tout brouillage radio-
électrique subi, même si le brouillage est susceptible d‘en com-
promettre le fonctionnement.
ISED SAR warning:
The highest SAR value reported under this standard during
product certication for use in the hand is 0.450W/kg.
Co-Location:
This transmitter must not be co-located or operated in conjunc-
tion with any other antenna or transmitter.
Avertissement SAR d‘ISED:
La valeur DAS la plus élevée rapportée selon cette norme lors
de la certication du produit pour une utilisation à la main est
de 0.450 W/kg
Co-location
Ce transmetteur ne peut pas être installé en colocation ou être
utilisé avec une autre antenne ou transmetteur, quel qu‘en soit
le type.
FCC Warnings
Information from the FCC (Federal Communications Commission)
For your own safety
Shielded cables should be used for a composite interface. This
is to ensure continued protection against radio frequency inter-
ference.
FCC warning statement
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential instal-
lation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interfe-
rence will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television recep-
tion, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.
Caution
Changes or modications not expressly approved by the party
responsible for compliance could void the user‘s authority to
operate the equipment. Shielded interface cable must be used
in order to comply with the emission limits.
Warning
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC SAR warning:
The SAR limit of USA (FCC) is 1.6 W/kg averaged over one
gram of tissue. The highest SAR value reported under this
standard during product certication of 0560 1915 (FCC
ID:WAF-05601915) for use when properly worn in the hand is
0.450 W/kg
Co-Location:
This transmitter must not be co-located or operated in con-
junction with any other antenna or transmitter.