Trixie Dayna Datasheet

Aufbauanleitung/Assembling Instruction/Instruction de montage
TRIXIE Pet Products, Inc. · P.O. Box 101196 · Ft. Worth, TX 76185 · www.trixiepet.com
010317
Assembling Instruction & Part List
Item No. 44876
UAdvice:
Please note the secure assembly and mounting required two individuals (adults).
Please check the screws regularly and retighten them if necessary.
Pos. a
Pos. b
Item No. Scratching Post Color Height
44876 Dayna gray 59.5 inch
(152 cm)
Pos. No. Description Measurement Quantity Item No.
Pos. 1 Platform 17.75 × 0.75 × 15.75 in.
(45 × 2 × 40 cm) 2 44876-10
Pos. 2 Cave, foldable 17.25 × 11.75 × 15.75 in.
(44 × 30 × 40 cm) 1 44876-11
Pos. 3 Hammock 20.5 × 1.5 × 15.75 in.
(52 × 4 × 40 cm) 1 44876-12
Pos. 4 Holder for wall 5.5 × 9 × 11.75 in.
(14 × 23 × 30 cm) 2 44876-13
Pos. 5 Support for Hammock 1 44876-14
Pos. 6 Post with spacer bolt for cave ø 2 × 10.5 in.
(ø 5 × 27 cm) 4 44876-30
Pos. 7 Post ø 4.25 × 6 in.
(ø 11 × 15 cm) 1 44876-31
Pos. 8 Post ø 4.25 × 11.75 in.
(ø 11 × 30 cm) 2 44876-32
Pos. 9 Post with spacer bolt ø 4.25 × 11.75 in.
(ø 11 × 30 cm) 1 44876-33
Pos. a Rounded head screw 0.3 × 2 in.
(M8 × 50 mm) 1
44876-50
Pos. b Rounded head screw 0.3 × 2.75 in.
(M8 × 70 mm) 1
Pos. c Countersunk screw 0.3 × 1.5 in.
(M8 × 40 mm) 4
Pos. d Countersunk screw 0.3 × 2 in.
(M8 × 50 mm) 5
Pos. e Thread rod 0.3 × 3.25 in.
(M8 × 80 mm) 2
Screw 4
Washer 0.3 × 1 in.
(M8 × 24 mm) 2
Allen key 1
Pos. c
Pos. d
1
2
1
3
4
5
6
7
8
a
b
c
c
c
4
c
e
e
d
d
d
d
d
6
6
6
8
9
Pos. e

1
Please use a stud finder (or other
technique) and a pencil. After loca-
ting the stud mark the center of the
stud, which will hold the product.
Use the top-holder to mark the two
holes for the final position of the
top holder.
2
Assemble the complete cat tree as
shown in the manual.
3
Bring the cat tree in final position with
the top holder matching the markings.
Second person is using a spirit level
or eyeballs how the bottom holder
should sit on the stud. Mark the holes
for the bottom holder with the pencil.
4
Use your drill and the 1/16“ bit to
make pilot holes for maximum 2 inch
to all 4 markings.
5
Unscrew the top holder for the post
and mount the top holder to the wall
as shown.
Don’t fasten the screws all the way.
This will allow to shift the holder up
and down during final assembly.
6
Mount the cat tree with bottom hol-
der to the wall and connect the top
post with the top holder.
Make sure all screws are tightened
securely.
UAdvice:
Please note the secure assembly and mounting required two individuals (adults).
Please check the screws regularly and retighten them if necessary.
Stud
Wall
Washer
Screw
Screw
Aufbauanleitung/Assembling Instruction/Instruction de montage
TRIXIE Pet Products, Inc. · P.O. Box 101196 · Ft. Worth, TX 76185 · www.trixiepet.com
240217
Assembling Instruction
Item No. 44876