Tumbl Trak Air Barrel User manual

Assembly Instructions
Air Barrel
Parts List
Thank you for investing in
the Tumbl Trak Air Barrel.
After opening the box,
please check the parts list
to make sure all pieces
have arrived in good
condition. If you have any
questions during this
assembly process, please
call customer service at
44 (0)2921 167 949.
B. C.
A.
Parts:
A. Air Barrel
B. Hand Pump
C. Adapter

STEP 1 –After unboxing and rolling
out your Air Barrel, locate the valve.
Remove the dust cover by turning
counter clockwise to reveal the valve
pin.
STEP 2 –Before inflating make sure the valve is
closed. To close valve push the pin down and turn a
quarter of the way around. The pin should be slightly
taller than the rim of the valve. Connect the adapter to
the hand pump tube. Insert the adapter into the valve
by pushing down and turning clockwise to lock in place.
Start manually inflating the Air Barrel. Put the dust cover
on once inflated.
STEP 3 –To open the valve and deflate the Air
Barrel push the pin down and turn a quarter of the
way around. The pin should sit just below the valve
rim.
STEP 4 —Make sure the dust cover remains
on the valve both inflated and deflated to
prevent particles from entering the valve.



