Tumbl Trak T-Trainer User manual

Thank you for purchasing the
T-Trainer.
Enjoy years of use with this
product.
Aer opening the boxes,
please check the parts list to
make sure all pieces have
arrived in good
condion. If you have any
quesons during this
assembly process, please call
customer service at
1-800-331-4362.
Any quesons or problems, please call Tumbl Trak at
[phone]
T-Trainer
Assembly InstruconsAssembly Instrucons
[A] T-Trainer
[B] Red mat cover
[C] Suede cover (oponal)
TT- -Trainer PartsTrainer Parts
Oponal

STEP 1 – Use care when opening with sharp objects.
STEP 2 — (2a) Aer removing the T-Trainer’s plasc wrapping (2b)
check to make sure the red pad is neatly tucked under the T-Trainer. (2c)
Carefully remove the plasc wrapping from the red pad.
Any quesons or problems, please call Tumbl Trak at
[phone]
STEP 3 – (3a) Lay the red pad upside down with the Velcro facing up. The front
Velcro ap will go under the back of the T-Trainer (3b) wrapping around the boom
bar at the base of the T-Trainer.
STEP 4 – (4a) Li the red pad up, while
aligning the pad with the T-Trainer. (4b)
Securely Velcro the red pad’s aps to the
T-Trainer.
2a
1
3a
1
2b 2c
3b
4a 4b

STEP 5 – In the front, Velcro the small straps at the end of the red
pad to the bars at the base of the T-Trainer.
Any quesons or problems, please call Tumbl Trak at
[phone]
STEP 6 – Use care when opening with sharp objects.
STEP 7 – (7a) Align the suede cover with the T-trainer. Securely Velcro to the T-Trainer’s red pad
starng in the front. (7b) The Tumbl Trak logo should be at the front of the T-Trainer.
Suede Cover
55
66
6
7a 7a 7b
Oponal: