Tumbl Trak FLY RIGHT Quick setup guide

Any questions or problems, please call Tumbl Trak at
[phone]
FLY RIGHT
Assembly/Use Instructions
Parts List:
[A] D2 Knob/Spring Loaded Pin
[B] Pedestal
[C] Base/Column
Parts List
Thank you for purchasing the FLY RIGHT. We
hope you will enjoy years of use with this
product.
After opening the boxes, please check the
parts list to make sure all pieces have
arrived in good
condition. If you have any questions during this
assembly process, please call customer service
at
1-800-331-4362.
↑
[A]
[B]
[C]

STEP 1 - Insert the pedestal into the column
attached to the base. Adjust FLY RIGHT to the
desired height. Hold the base while adjusting the
height so it will not slip down, making sure the
pedestal is secure with the pin in place and the
knob turned tightly to secure the pin in place.
STEP 2 - Place one foot squarely on the
base and step up on the platform balancing
on one leg, making sure the knee is locked
out and hips are squared and centered.
STEP 3 - Align body so that proper stunting
technique is practiced: shoulders over knees
over toes, core tight, opposite leg hanging
down next to the base.
STEP 4 - Squeeze stomach muscles and
focus balancing on one leg.
Any questions or problems, please call Tumbl Trak at
[phone]

STEP 5 - As flyer becomes steady, the flyer can then
begin practicing skill progressions with the basic one
leg stunting body positions: Liberty, Heel Stretch,
Arabesque, Scale, Scorpion, Waterfall, etc. (Flyer
should be stretched out before stunting. Flyer may
want a spotter while practice the more elite skills.)
STEP 6 - This device is for persons not exceeding 150
pounds.
STEP 7 - Only one user on the FLYRIGHT at
a time.
STEP 8 - This product is not intended for
release skills. Only one foot at a time
should be on the platform. To switch legs,
step off the equipment and switch legs.
Any questions or problems, please call Tumbl Trak at
[phone]