Tumbl Trak Air Barrel User manual

Any questions or problems, please call Tumbl Trak at
[phone]
Assembly Instructions
Air Barrel
Parts:
A. Air Barrel
B. Hand Pump
Parts List
B.A.
Thank you for investing in
the Tumbl Trak Air Barrel.
After opening the boxes,
please check the parts list
to make sure all pieces
have arrived in good
condition. If you have any
questions during this
assembly process, please
call customer service at
1-800-331-4362.

STEP 1 – Aer unboxing and rolling out
your Air Barrel, locate the valve. Remove
the dust cover by turning counter clockwise
to reveal the valve pin.
Step 1 Step 1
STEP 2 – Before inang make sure the valve is
closed. To close valve push the pin down and
turn a quarter of the way around. The pin
should be slightly taller than the rim of the
valve. Connect the hose by inserng it into the
valve, while pushing down and turning clockwise
to lock in place. Turn the pump on to inate. Put
the dust cover on once inated.
STEP 3 – To open the valve and deate
the Air Barrel, push the pin down and
turn a quarter of the way around. The
pin should sit just below the valve rim.
Step 4 —Make sure the dust cover remains
on the valve both inated and deated to
prevent parcles from entering the valve.
Step 2
Step 2
Step 3
Step 3
Step 4
Any questions or problems, please call Tumbl Trak at
[phone]