Tumbl Trak Pit Pillow User manual

Thank you for purchasing the
Pit Pillow. You will enjoy
years of use with this
product.
Aer opening the boxes,
please check the parts list to
make sure all pieces have
arrived in good
condion. If you have any
quesons during this
assembly process, please call
customer service at
1-800-331-4362.
Sizes, Parts and Expansion Time:
3’x4’x8” ………………………………. 2 hr
4’ Velcro strap
4’x6’x8” ………………………………. 4 hr
6’ Velcro strap
5’x6’x6” ………………………………. 4 hr
6’ Velcro strap
6’x8’x12” ……………………………. 1 day
8’ Velcro strap
4’ Velcro strap
Pit Pillow Assembly Instructions
www.tumbltrak.com | 800-331-4362 | [e-mail]

STEP 1 – Carefully open box and
remove the Pit Pillow.
STEP 2 — Open one end of the sealed
Pit Pillow and make a slit at the top. Pull
the plasc from each side, tearing the
plasc o.
STEP 3 – (3A) Aer removing the plasc seal
from the Pit Pillow. (3B) Unroll the Pit Pillow
and lay at on the ground.
STEP 4 —Allow Pit Pillow to fully
expand before use. (Refer to Pg. 1
based on size of Pit Pillow)
Step 1
Step 2
Step
Step
Step 4
www.tumbltrak.com | 800-331-4362 | [e-mail]
*Note: The cover and foam for the 6’x8’x12” Pit Pillow will come unassembled. To assemble unfold and lay the
Pit Pillow cover with the Pit Pillow logo and Velcro facing the oor. Follow the instrucons above when unpacking the
foam. Immediately insert the foam in the boom part of the cover so the Pit Pillow logo will be facing up when folding
the cover over. Fold the top of the Pit Pillow cover over and begin to Velcro one side and work your way around the
Pit Pillow. Allow the foam to fully expand in the cover and adjust foam if needed.