UNIS BEAT THE GOALIE User manual

Operation Manual
www.universal-space.com

Beat the Goalie Rev1.0
1
Non-technical personnel who do not have technical knowledge and
Expertise should refrain from performing such work that this manual
require or perform tasks which are not explained in this manual.
Failing to comply can cause severe accidents such as electric shock or
other serious injuries. All repairs must be performed to original
manufacturer specifications.
WARNING: To reduce the risk of fire, electric shock or personal injury,
unplug or disconnect the machine from the power supply before
servicing.
CONTENT
IMPORTANT SAFETY INSTRUCTIONS.....................................................2
1. SPECIFICATIONS................................................................................4
2. PACKAGE CONTENTS.........................................................................5
3. PART NAME.......................................................................................6
4. SET UP & INSTALLATION...................................................................7
5. HOW TO PLAY..................................................................................10
7. ERROR MESSAGE AND RECOVERY.................................................16
8. MAINTENANCE & INSPECTION........................................................17
9. OVERALL CONSTRUCTION...............................................................18

Beat the goalie Rev1.0
2
Thank you for purchasing BEAT THE GOALIE. We hope you enjoy the product.
This manual contains valuable information about how to operate and maintain your game
machine properly and safely. It is intended for the owner and/or personnel in charge of
product operation. Carefully read and understand the instructions.
If you need any help during installation and setup please utilize this manual and
troubleshooting guide. If the product fails to function properly, non-technical personnel should
under no circumstance attempt to service the machine. Contact your distributor or
manufacturer for help.
Before use, please read IMPORTANT SAFETY INSTRUCTIONS.
IMPORTANT SAFETY INSTRUCTIONS
To ensure the safe usage of this product, carefully read and
understand these instructions before operating your game.
Save these instructions for future reference.
Use this product only as described in this manual. Other uses not recommended may cause
fire, electric shock or personal injury. Unplug the game from the outlet when not in use, when
moving from one location to another, and before cleaning/servicing.
Explanations which require special attention are indicated by signs of warning. Depending on
the potential hazardous degree, the terms: NOTE, NOTICE, and WARNING are used.
NOTE: A NOTE indicates useful hints or information about product usage.
NOTICE: A NOTICE indicates potential damage to product and how to avoid the problem.
WARNING: A WARNING indicates a potential for product damage or serious personal Injury.
It is important to understand the meaning of the following HAZARD SIGNS before continuing:
High Voltage and Shock Hazard:
High voltage can cause electric shock.
Turn off/unplug power before servicing.
High Temperature Hazard:
This part may cause scalding.
Do not touch. Surface may be hot.
No Touching Hazard:
This part may be hot or can cause electric shock.
Do not touch.
Use the following safety guidelines to help ensure your own personal safety and to help
protect your equipment and surrounding environment from potential damage.


Beat the Goalie Rev1.0
3
This product is an indoor game machine. Do not install outdoors.
Avoid installing in the following places to prevent fire, electric shock, injury
and/or machine malfunctioning:
Places subject to rain/moisture, or places subject to high humidity.
Places subject to direct sunlight, or places subject to extremely hot or cold temperatures to
ensure that it is used within the specified operating range.
Places where inflammable gas may be present or in the vicinity of highly
inflammable/volatile chemicals or items that can easily catch fire
On unstable or sloped surfaces. The machine may topple or cause unforeseen accidents.
Vicinity of fire exits, fire extinguishers etc that may block/prevent safety measures
IMPORTANT NOTE:
ALL REPAIRS MUST BE DONE TO ORIGINAL MANUFACTURER SPECIFICATIONS.
FAILURE TO DO SO VOID ALL WARRANTIES AND OPERATOR ASSUMES ALL RISKS.
Note: The contents of this manual may be updated without notice.

Beat the goalie Rev1.0
4
1. SPECIFICATIONS
Rated power supply: AC110V 50/60Hz
Min. Power consumption: 100W
Max. Power consumption：170W
Dimensions：W1760×D950×H1895 (mm)
Weight：Approximately205kgs
NOTICE: After turning off the game, please wait at least 1 minute before
restarting again.
Note: Game parameters are subject to change without notice.

Beat the Goalie Rev1.0

5
2. PACKAGE CONTENTS
Open the package and make sure all the items are included:
1 x Body Assembly
Following accessories
NO. Part No. Code Name Spec. Qty Picture
1 B121-467-000 25300172002 Key 171B 1
2 B121-466-000 25300171002 Key 171A 2
3 B121-465-000 21901000015 Fuse Φ5×20mm T6.3A
250VAC 1
4 B121-742-000 41440000052 Manual English 1
5 B121-101-000 20611407004 Ball spin φ50 2
6 B121-102-000 20611407014 Ball φ35 20
7 B121-403-000 29711407005 Sensor 2
MFDZ-HW2.PCB(V1.0)
blue 1
8 B121-404-000 29711407004 Sensor 2
MFDZ-HW2.PCB(V1.0)
green 1
9 B121-405-000 29711407003 Sensor 2
MFDZ-HW2.PCB(V1.0)
yellow 1
10 B121-406-000 29711407002 Sensor 2
MFDZ-HW2.PCB(V1.0)
red 1
If any items are found to be missing, please contact your sales representative
for help immediately.
NOTE: Part models are subject to change without notice.

Beat the goalie Rev1.0
6
3. PART NAME
Marquee
Speaker
Gun
Button
Coin mech.
Tik. dispenser
Score hole
Goalie plexi.

Beat the Goalie Rev1.0
7
4. SET UP & INSTALLATION
This product is an indoor game machine. Do not install outdoors.
Refer to IMPORTANT SAFETY INSTRUCTIONS (Pg. 2) for places to avoid
Place the unit on a dry level surface
Ventilation openings in the back of the unit must not be obstructed by objects or by wall.
4.1 Play Zone
This machine requires space for playing and for maintenance as shown below.
Leave space around the game upon installation:
Service Area: 500mm
Play Area: 500mm
Passage way
Pla
y
Area

Beat the goalie Rev1.0
8
4.2 Level Adjustment
Install this machine on a flat surface. Adjust levers to lift casters off the ground to level the
game. If the game is installed on an unsuitable floor, it could cause game malfunction.
To secure the game, adjust the Leveler down until it touches the floor, lifting the casters off
the ground by 5mm. Repeat the same for all levelers.
4.4 Transporting the Machine
If you need to move the game, adjust the levelers back to an “up” position so the casters
touch the ground.
NOTICE
Be careful not to damage the machine during transport.
The machine should be handled with care when bringing it down from a higher level.
Always unplug the game before moving.
Keep the machine in upright position during transport.
For longer distance transport, package the game properly to prevent damages.
Levele Caste
Move
About 5 mm
Fix

Make sure the machine is level with the ground and all the
adjustable legs should stick to the floor closely.
NOTICE
Move Fix
Leveler Castor
About 5mm

Beat the Goalie Rev1.0
9
4.5 Connecting Power
WARNING: Check the voltage rating before you connect the equipment to
an electrical outlet to ensure that the required voltage and frequency match the
available power source. Please refer the label of the machine.
Do not plug the equipment power cables into an electrical outlet if the power cable is
damaged.
Avoid putting many loads on one electrical outlet as it could generate heat and fire
resulting from overload.
Connect the grounding conductor to the earth terminal (GND):
WARNING
Ensure no heavy objects rest on the power cord. Check to make sure the game cabinet does
not sit on the power cord as this could damage the cord and become hazardous.
To disconnect the game, grip the plug and pull it from the wall outlet. Never pull by the cord.
To prevent electric shock, do not touch the power plug when hand is wet.
Ensure that nothing rests on the power cord and that it is not located where it can be stepped
on or tripped over.
Power outlet
Power plug
Power socket
Power plug
Power cord