UNIS Crazy Hoop User manual

www.universal-space.com

Crazy Hoop
1
CONTENT
IMPORTANT SAFETY INSTRUCTIONS......................................................2.
1. SPECIFICATIONS....................................................................................4.
2. PACKAGE CONTENTS.........................................................5.
3. ASSEMBLE STEPS.................................................................. 6.
4. LAYOUT ON CONTROL PANEL.........................14.
5. LINK GAME....................................................................15.
6. Adjustment……........................................................................................7.
7. Using and Maintenance............................................................................8
8. Installation Manual…...............................................................................9
10. I/O Chart.
11. Wiring Diagram

Crazy Hoop
2
Thank you for purchasing Crazy Hoop from UNIVERSAL SPACE. We hope you
enjoy the product.
This manual contains valuable information about how to operate and maintain your game machine
properly and safely. It is intended for the owner and/or personnel in charge of product operation.
Carefully read and understand the instructions.
If you need any help during installation and setup please utilize this manual and troubleshooting guide.
If the product fails to function properly, non-technical personnel should under no circumstance attempt
to service the machine. Contact your distributor or manufacturer for help.
Before use, please read IMPORTANT SAFETY INSTRUCTIONS.
IMPORTANT SAFETY INSTRUCTIONS
To ensure the safe usage of this product, carefully read and understand
these instructions before operating your game.
Save these instructions for future reference.
Use this product only as described in this manual. Other uses not recommended may cause fire,
electric shock or personal injury. Unplug the game from the outlet when not in use, when moving from
one location to another, and before cleaning/servicing.
Explanations which require special attention are indicated by signs of warning. Depending on the
potential hazardous degree, the terms: NOTE, NOTICE, and WARNING are used.
NOTE: A NOTE indicates useful hints or information about product usage.
NOTICE: A NOTICE indicates potential damage to product and how to avoid the problem.
WARNING: A WARNING indicates a potential for product damage or serious personal Injury.
It is important to understand the meaning of the following HAZARD SIGNS before continuing:
High Voltage and Shock Hazard:
High voltage can cause electric shock.
Turn off/unplug power before servicing.
High Temperature Hazard:
This part may cause scalding.
Do not touch. Surface may be hot.

Crazy Hoop
3
No Touching Hazard:
This part may be hot or can cause electric shock.
Do not touch.
Use the following safety guidelines to help ensure your own personal safety and to help protect your
equipment and surrounding environment from potential damage.
This product is an indoor game machine. Do not install outdoors.
Avoid installing in the following places to prevent fire, electric shock, injury and/or
machine malfunctioning:
•Places subject to rain/moisture, or places subject to high humidity.
•Places subject to direct sunlight, or places subject to extremely hot or cold temperatures to
ensure that it is used within the specified operating range.
•Places where inflammable gas may be present or in the vicinity of highly inflammable/volatile
chemicals or items that can easily catch fire
•On unstable or sloped surfaces. The machine may topple or cause unforeseen accidents.
•Vicinity of fire exits, fire extinguishers etc that may block/prevent safety measures
Note: The contents of this manual may be updated without notice.
WARNING
Non-technical personnel who do not have technical knowledge and
Expertise should refrain from performing such work that this manual
require or perform tasks which are not explained in this manual. Failing to
comply can cause severe accidents such as electric shock or other serious
injuries.
WARNING: To reduce the risk of fire, electric shock or personal
injury, unplug or disconnect the machine from the power supply before
servicing.

Crazy Hoop
4
1. SPECIFICATIONS
(1) Work power: AC220V±10 50Hz or 110V±10 60Hz
(As the actual voltage, please refer the label of the machine)
(2) Power Consumption: Min 90W, Max 200W
(3) Dimension: W1020×D2500×H2700 (mm)
(4) Weight: About 260Kg
(5) Condition: (Indoor) Temperature: -10℃~+40℃
Humidity: ≤90%
Atmospheric pressure: 86Pa~106 Pa
NOTICE: After turning off the game, please wait at least 1 minute before
restarting again.
Note: Game parameters are subject to change without notice.

Crazy Hoop
5
2. PACKAGE CONTENTS
Open the package and make sure all the items are included:
•1 x Body Assembly,1 x Control panel Assembly, 1 x Marquee Assembly, 1 xBall gate assembly,
1 x playfield assembly.
•Following accessories
No. Component Specification Qty Unit Illustration Note
1 Power Cord 15A/250V 3.5m 1 pcs
2 Fuse
5A/250 (10A/125V)
φ5-20 2 pcs
3 Operation manual English 1 pcs
171 1 pcs
Service door
4 Key
2222 1 pcs
Cash box door
5 Bearing with shaft 6002Z 2 pcs
6 Circlip GB/T894.2-1986/do=16 2 Pcs
7 Gas pin 2 pcs
8 UNIS basketball Size 5 8 pcs
If any items are found to be missing, please contact your sales representative for help
immediately.

Crazy Hoop
6
3. ASSEMBLE STEPS

Crazy Hoop
7
Step 2

Crazy Hoop
8
Step 3

Crazy Hoop
9
Step 4

Crazy Hoop
10
Step 5

Crazy Hoop
11
Step 6

Crazy Hoop
12
Step 7

Crazy Hoop
13

Crazy Hoop
14
4. LAYOUT ON CONTROL PANEL
Control panel:
Step 1：Connecting
.
Step 2：Connecting
Low voltage exit
Link wire
“Link2” exit
High voltage exit
Link wire
“Link1” exit
Power cord exit
Low voltage
wires go through
thishole
High voltage
wires go thrigh
this hole
Link 1
Link 2
Power cord exit
Connect the wires to
the PCB as per the
numbers marked on
the PCB.

Crazy Hoop
15
5 LINK GAME
5-1 There are two buttons on the control panel:
Link Game button：Press this button to compete with others.
Single Player：Press this button to have single player game.
5-2 Link game schematic：
5-3 How to link games：Connect Link 2 (in Game①) to Link 1 (in Game②).
Then connect Link2 (in Game②) to Link1 (in Game③). The rest of the connections are the same.
5-4 Connection illustration:

Crazy Hoop
16
Notice:
When linking the game, there should be one game set as Game #1. Any of the
games can be set as Game #1. The rest of the games can be #2 to #30 but you
cannot repeat.
30 games can compete with each other in groups.
The first time to start the game, it will show "1IP01 V1.02".The first "1" means
the goup form. "IP01" means the NO1 machine.
NO1 machine will send it's setting (excluding SW4) to the linking games after a
few seconds when game starts. It will reset when turned off.
The DIP SWITCH setting in other games should be the same as the Game NO1
setting except the Game NO.
To set the JP value, you only need to set on the Game NO1.
5-5 Wiring layout:
In order to clear the layout in the machine, below is the instruction for your reference:

Crazy Hoop
17
6. SET UP & INSTALLATION
This product is an indoor game machine. Do not install outdoors.
zRefer to IMPORTANT SAFETY INSTRUCTIONS (Pg. 3) for places to avoid
zPlace the unit on a dry level surface
zVentilation openings in the back of the unit must not be obstructed by objects or by wall.
4-1 Play Zone
This machine requires space for playing and for maintenance as shown below.
Leave space around the game upon installation:

Crazy Hoop
18
4-2 Level Adjustment
Install this machine on a flat surface. Adjust levers to lift casters off the ground to level the game. If
the game is installed on an unsuitable floor, it could cause a malfunction.
To fix the game, adjust the Leveler down until it touches the floor, lifting the casters off the ground by
5mm. Repeat the same for all levelers.
4-3 Transporting the Game
If you need to move the game, adjust the levelers back to an “up” position so the casters touch the
ground.
NOTICE
•Be careful not to damage the machine during transport.
•The machine should be handled with care when bringing it down from a higher level.
•Always unplug the game before moving.
•Keep the machine in upright position during transport.
•For longer distance transport, package the game properly to prevent damages
4-4 Connecting Power
WARNING: Check the voltage rating before you connect the equipment to an
electrical outlet to ensure that the required voltage and frequency match the available
power source. Please refer the label of the machine.
•Do not plug the equipment power cables into an electrical outlet if the power cable is damaged.
•Avoid putting many loads on one electrical outlet as it could generate heat and fire resulting
from overload.
•Connect the grounding conductor to the earth terminal (GND):
Make sure the machine is level with the ground and all the
adjustable legs should stick to the floor closely.
NOTICE

Crazy Hoop
19
WARNING
Ensure no heavy objects rest on the power cord. Check to make sure the game cabinet does not sit on
the power cord as this could damage the cord and become hazardous.
To disconnect the game, grip the plug and pull it from the wall outlet. Never pull by the cord.
To prevent electric shock, do not touch the power plug when hand is wet.
Ensure that nothing rests on the power cord and that it is not located where it can be stepped on or
tripped over.