UNIS Extreme Shot User manual

Operation Manual
www.universal-space.com

Have Questions? Contact us!
International Support Center USA Support Center
Tel: [phone]
Fax: [phone]
Email: ser[email protected]
Tel: [phone]
Fax: [phone]
Email: [e-mail]

Extreme Shot Manual
1
Non-technical personnel who do not have technical knowledge and
Expertise should refrain from performing such work that this manual
require or perform tasks which are not explained in this manual. Failing
to comply can cause severe accidents such as electric shock or other
serious injuries. All repairs must be performed to original manufacturer
specifications.
WARNING: To reduce the risk of fire, electric shock or personal injury,
unplug or disconnect the machine from the power supply before
servicing.
CONTENT
IMPORTANT SAFETY INSTRUCTIONS ..................................................... 2
1. SPECIFICATIONS................................................................................... 4
2. PACKAGE CONTENTS........................................................................... 6
3. PART NAME.........................................................................................10
4. SET UP & INSTALLATION...................................................................11
5. HOW TO PLAY .....................................................................................24
7. ERROR MESSAGE AND RECOVERY..................................................29
8. MAINTENANCE & INSPECTION .........................................................31
9. OVERALL CONSTRUCTION.................................................................32
10. WIRING DIAGRAM ...........................................................................48

Extreme Shot Manual
2
Thank you for purchasing Extreme Shot. We hope you enjoy the product.
This manual contains valuable information about how to operate and maintain your game
machine properly and safely. It is intended for the owner and/or personnel in charge of
product operation. Carefully read and understand the instructions.
If you need any help during installation and setup please utilize this manual and
troubleshooting guide. If the product fails to function properly, non-technical personnel
should under no circumstance attempt to service the machine. Contact your distributor or
manufacturer for help.
Before use, please read IMPORTANT SAFETY INSTRUCTIONS.
IMPORTANT SAFETY INSTRUCTIONS
To ensure the safe usage of this product, carefully read and
understand these instructions before operating your game.
Save these instructions for future reference.
Use this product only as described in this manual. Other uses not recommended may
cause fire, electric shock or personal injury. Unplug the game from the outlet when not in
use, when moving from one location to another, and before cleaning/servicing.
Explanations which require special attention are indicated by signs of warning. Depending
on the potential hazardous degree, the terms: NOTE, NOTICE, and WARNING are used.
NOTE: A NOTE indicates useful hints or information about product usage.
NOTICE: A NOTICE indicates potential damage to product and how to avoid the problem.
WARNING: A WARNING indicates a potential for product damage or serious personal Injury.
It is important to understand the meaning of the following HAZARD SIGNS before
continuing:
High Voltage and Shock Hazard:
High voltage can cause electric shock.
Turn off/unplug power before servicing.
High Temperature Hazard:
This part may cause scalding.
Do not touch. Surface may be hot.
No Touching Hazard:
This part may be hot or can cause electric shock.
Do not touch.

Extreme Shot Manual
3
Use the following safety guidelines to help ensure your own personal safety and to help
protect your equipment and surrounding environment from potential damage.
This product is an indoor game machine. Do not install
outdoors.
Avoid installing in the following places to prevent fire, electric shock, injury
and/or machine malfunctioning:
Places subject to rain/moisture, or places subject to high humidity.
Places subject to direct sunlight, or places subject to extremely hot or cold
temperatures to ensure that it is used within the specified operating range.
Places where inflammable gas may be present or in the vicinity of highly
inflammable/volatile chemicals or items that can easily catch fire
On unstable or sloped surfaces. The machine may topple or cause unforeseen
accidents.
Vicinity of fire exits, fire extinguishers etc that may block/prevent safety measures
IMPORTANT NOTE:
ALL REPAIRS MUST BE DONE TO ORIGINAL MANUFACTURER SPECIFICATIONS.
FAILURE TO DO SO VOID ALL WARRANTIES AND OPERATOR ASSUMES ALL
RISKS.
Note: The contents of this manual may be updated without notice.

Extreme Shot Manual
4
1. SPECIFICATIONS
Rated power supply: AC110V 50/60Hz; AC220V 50/60Hz
Min. Power consumption: 90W
Max. Power consumption: 200W
Dimension: W40.68×D98.82×H111.73 in
Dimensions Container: W
Weight：Approximately 573.2 lb
Part No: E103
Model No: A-399
NOTICE: After turning off the game, please wait at least 1 minute
before restarting again.

Extreme Shot Manual
5
Note: Game parameters are subject to change without notice.
111.73 in
98.82 in

Extreme Shot Manual
6
2. PACKAGE CONTENTS
Open the package and make sure all the items are included:
1. 1 x Body Assembly
No. Name Qty Picture No. Name Qty Picture
1 Main body 1 2
Control
panel
assy.
1
3 Marquee
assy. 1
4
Ball
gate
assy.
1
5 Playfield 1
6 Beam 2
7
Front
middle
beam
bracket
1 8
Playfiel
d front
bracket
1
9
Longer
side light
box
2 10
Shorter
side
light box
2
11 Ball front
bracket 1

Extreme Shot Manual
7
2. Following accessories
No
Part No Code No. Description Spec. picture Qty
1 E103-185-000
20113000051
C flat washer
8×1.6h 12
2 E103-186-000
20113000053
C flat washer
6×1.6h 2
3 E103-187-000
20113000035
C large
washer Φ6xΦ30x3h
4
4 E103-188-000
20102040023
Non-metallic
hexagon lock
nut
M8 20
5 E103-189-000
20102040003
Non-metallic
hexagon lock
nut
M6 2
6 E103-190-000
20102040038
Cap nut M6 2
7 E103-191-000
20101048009
Hexagon flat
round head
screws
M8×80 4
8 E103-192-000
20101048012
Hexagon flat
round head
screws
M8×70 4

Extreme Shot Manual
8
No Part No Code No. Description Spec. picture Qty
9 E103-193-000 20101048010
Hexagon flat
round head
screws
M8×25 12
10 E103-194-000 20101020145
Cross
recessed pan
head screw
suite
M8×20 4
11 E103-195-000 20101008003
Hexagon flat
round head
screws
M6×60 4
12 E103-196-000 20101100185
Hexagon flat
round head
screws
M6×40 12
13 E103-197-000 20101040005
Hexagon flat
round head
screws
M4×12 22
14 E103-198-000 2010E1030183
Cross
recessed pan
head screw
suite
M6×40 6
15 E103-199-000 20101040147
Cross
recessed pan
head screw
suite
M6×16 4
16 E103-440-000 25101181002 Plug head Φ10
4
17 E103-441-000 40613050001
Inflation
needle 2
18 E103-442-000 23301000004 Power cord
10A/250V-3M 1

Extreme Shot Manual
9
No Part No Code No. Description Spec. picture Qty
19 E103-443-000 25300171002 Key 171A 1
20 E103-444-000 25300172002 Key 171B 1
21 E103-445-000 21504000001
Photoelectric
SW reflector
50×55 1
22 E103-446-000 21901000012 Fuse Φ5×20mm
T5A 250VAC 1
23 E103-447-000 41000000015 Basketball 505 6
24 E103-448-000 41440000177 Manual 1
25 E103-200-000 20101010017
cross
recessed
countersunk
head screw
M4x12
8
NOTE: Part models are subject to change without notice.

Extreme Shot Manual
10
3. PART NAME
Gate Ass
y
.
Display
Ticket dispenser Assy.
Coin Assy.
(card system wiring inside )
Mar
q
uee Ass
y
.
Control panel

Extreme Shot Manual
11
4. SET UP & INSTALLATION
This product is an indoor game machine. Do not install
outdoors.
Refer to IMPORTANT SAFETY INSTRUCTIONS (Pg. 3) for places to avoid
Place the unit on a dry level surface
Ventilation openings in the back of the unit must not be obstructed by objects or by
wall.
4.1 Transporting the Game
If you need to move the game, adjust the levelers back to an “up” position.
NOTICE
Be careful not to damage the machine during transport.
Always unplug the game before moving.
Keep the machine in upright position during transport.
For longer distance transport, package the game properly to prevent damages.
4.2 Level Adjustment
Install this machine on a flat surface. Adjust levers to lift casters off the ground to level the
game
. If the game is installed on an unsuitable floor, it could cause game malfunction.
To secure the game, adjust the Leveler down until it touches the floor, lifting the casters off
the ground by 0.2 in. Repeat the same for all levelers.
Leveler Caster
Move F
i
Caster Leveler
About 0.2 in
Move Fix
NOTICE
Make sure the machine is level.

Extreme Shot Manual
12
4.3 Play Zone
This machine requires space for playing and for maintenance as shown below.
Leave space around the game upon installation:
Service area: 31.5 in
Play area: 20 in
80cm
30cm
30cm
30cm
操作区
本机摆放
Machine
Service
area

Extreme Shot Manual
13
4.4How to Install the Machine
4.4.1 Remove the packing (This is the picture without packing.)

Extreme Shot Manual
14
4.4.2 Front bracket
Open the Front bracket
(L&R)

Extreme Shot Manual
15
4.4.3 Install the cross beam and bracket
Attach the bracket (top) with 6
hexagon flat round head screws
（○14103-198-000）
Turn up the bracket (top) and
attach it.
Attach the bracket (top) with
hexagon flat round head
screws （○11 103-195-000 ）
and non-metallic hexagon
lock nut（○5 E103-189-000）.
Install the cross beams.
Attach the cross
beams with hexagon
flat round head screws
（○ 12 103-196-000 ）
103-196-000).

Extreme Shot Manual
16
4.4.4 Install front bracket plate and cross beams
Install front bracket
plate.
Attach the cross beams
with hexagon flat round
head screws （○12
103-196-000）.
Attach the brackets
with hexagon flat
round head screws
（○8 E103-192-000 ）
and non-metallic
hexagon lock nut （○4
E103-188-000）.

Extreme Shot Manual
17
4.4.5 Install ball track plate
Attach the marquee assy. with
cross recessed hexagon head bolt
suite （○15E103-199-000）
.
Attach the front playfield and ball
gate assy. with hexagon flat round
head screws and non-metallic
hexagon lock nut（○9 E103-193-000）
（○4 E103-188-000）.