Velleman HAM201 User manual

HAM201
PIR home alarm system with wireless remote
PIR-alarm met draadloze afstandsbediening
Alarme PIR avec télécommande sans fil
Sistema de alarma PIR con mando a distancia
PIR-Alarmanlage mit Funk-Fernbedienung
Sistema de alarme PIR para habitações com controlo remoto
sem fios
USER MANUAL 6
GEBRUIKERSHANDLEIDING 10
MODE D'EMPLOI 15
MANUAL DEL USUARIO 20
BEDIENUNGSANLEITUNG 25
MANUAL DO UTILIZADOR 30

HAM201
V. 03 –11/12/2014 2 ©Velleman nv

HAM201
V. 03 –11/12/2014 3 ©Velleman nv

HAM201
V. 03 –11/12/2014 4 ©Velleman nv

HAM201
V. 03 –11/12/2014 5 ©Velleman nv

HAM201
V. 03 –11/12/2014 6 ©Velleman nv
USER MANUAL
1. Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that
disposal of the device after its lifecycle could harm the
environment. Do not dispose of the unit (or batteries) as
unsorted municipal waste; it should be taken to a
specialized company for recycling. This device should be
returned to your distributor or to a local recycling service. Respect
the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for choosing Velleman! Please read the manual thoroughly
before bringing this device into service. If the device was damaged in
transit, don't install or use it and contact your dealer.
2. Safety Instructions
Keep this device away from children and unauthorised
users.
Indoor use only. Keep this device away from rain,
moisture, splashing and dripping liquids.
3. General Guidelines
Refer to the Velleman® Service and Quality Warranty on the last
pages of this manual.
This system can provide valuable protection for your home and
property if used properly. However, it cannot guarantee complete
protection against burglary or robbery. Therefore, Velleman nv will
not be responsible for any losses or damages which occur during
the use of this product.
Keep this device away from dust and extreme temperatures.
Protect this device from shocks and abuse. Avoid brute force when
operating the device.
Familiarise yourself with the functions of the device before actually
using it.

HAM201
V. 03 –11/12/2014 7 ©Velleman nv
All modifications of the device are forbidden for safety reasons.
Damage caused by user modifications to the device is not covered
by the warranty.
Only use the device for its intended purpose. Using the device in
an unauthorised way will void the warranty.
Damage caused by disregard of certain guidelines in this manual
is not covered by the warranty and the dealer will not accept
responsibility for any ensuing defects or problems.
There are no user-serviceable parts inside the device except for
the batteries. Refer to an authorized dealer for service and/or
spare parts.
Do not use this product to violate privacy laws or perform illegal
activities. Respect the legislation in your region when installing an
alarm system. If necessary, refer to local authorities.
4. Features
This basic home alarm system has an integrated PIR sensor. The PIR
sensor detects if an intruder enters the room. An infrared remote
allows you to arm and disarm the alarm system. A solar panel
provides power during standby. The battery power is only used
during an alarm trigger.
alarm trigger: motion detection via PIR sensor
remote control to arm and disarm the alarm system
solar panel to extend battery lifetime
130 dB alarm sound
quick and easy installation.
5. Overview
Refer to the illustrations on page 2 of this manual.
alarm system
1
solar panel
4
battery compartment
2
indicator LED
5
siren
3
motion detector
remote control
6
IR LED
8
arm button (ARM)
7
indicator LED
9
disarm button (CLR)

HAM201
V. 03 –11/12/2014 8 ©Velleman nv
6. Installation
6.1 Installing/Replacing Batteries
Refer to the illustrations on page 3–4 of this manual.
Warning! Do not puncture batteries or throw them in fire as
they may explode. Do not attempt to recharge non-
rechargeable batteries (alkaline). Dispose of batteries in
accordance with local regulations. Keep batteries away from
children.
Caution! Remove the batteries from the devices if they will not be
used for a long time. Old batteries can begin to leak and damage the
device.
Alarm
When the red indicator LED [2] lights up continuously, the batteries
are low. In that case, replace the batteries immediately.
1. Remove the screw from the bottom of the alarm cover and take
off the cover [A].
2. Insert 3 identical 1.5 V AA batteries according to the polarity
markings inside the battery compartment.
When the last battery is inserted, the alarm beeps to indicate
that the batteries are installed correctly.
3. Place the cover back and fix it with the screw.
Caution! Each time you replace the batteries, you must reconnect
the alarm to the remote control.
Remote Control
1. Remove the screws from the back of the remote control and
take off the cover [B].
2. Insert 3 identical LR44 batteries according to the polarity
markings inside the battery compartment.
3. Place the cover back and fix it with the screws.
6.2 Connecting the Alarm and the Remote Control
After inserting batteries, point the remote control to the alarm and
push the ARM button [8] twice. The alarm's LED [2] lights up to
indicate that the connection between alarm and remote control is
established.
To clear a connection between an alarm and a remote control, take
out the batteries from the alarm. The connection is deleted
automatically.

HAM201
V. 03 –11/12/2014 9 ©Velleman nv
Caution! Each time you replace the batteries, you must reconnect
the alarm to the remote control.
6.3 Installing the Alarm
You can use the alarm free-standing on a horizontal surface, or you
can attach it to a wall. To mount against a wall, proceed as follows:
1. Remove the back cover from the alarm and screw it to the wall
at 1.0–1.5 m above the ground [C].
2. Click the body of the alarm into place on the back cover and fix
it with the screw.
7. Operation
Arming and Disarming the Alarm
To arm the alarm, press the ARM button [8] on the remote
control. The alarm plays a confirmation tune to indicate that
arming is successful. Note that the alarm is only activated after a
delay of 30 seconds, to allow you to leave the area without
triggering the alarm.
When the alarm detects motion, the siren goes off after a delay of
5 seconds. These 5 seconds allow you to enter the area again and
disarm the alarm before it goes off.
To disarm the alarm, press the CLR button [9] on the remote
control.
8. Troubleshooting
Problem: I installed the batteries, but the alarm did not beep.
Solution: Make sure that the batteries are installed correctly
according to the polarity markings in the battery compartment.
Problem: The alarm does not arm.
Solution: Make sure that the batteries are installed correctly; that
the cover is fixed in place correctly; and that the indicator LED [7]
on the remote control lights up when pressing the arm or disarm
buttons.
Problem: The red LED is on.
Solution: The batteries are low. Replace the batteries immediately.

HAM201
V. 03 –11/12/2014 10 ©Velleman nv
9. Technical Specifications
power supply
solar panel
4.5 V
battery
3 x 1.5 V AA batteries (not incl.)
PIR detection area
120° horizontal and 60° vertical
sound level
130 dB
alarm delay
exit delay 30 seconds, entry delay 5 seconds
weight
180 g
dimensions
68 x 160 x 36 mm
Use this device with original accessories only. Velleman nv
cannot be held responsible in the event of damage or injury
resulting from (incorrect) use of this device. For more info
concerning this product and the latest version of this manual,
please visit our website www.velleman.eu. The information in
this manual is subject to change without prior notice.
© COPYRIGHT NOTICE –The copyright to this manual is
owned by Velleman nv. All worldwide rights reserved. No part
of this manual may be copied, reproduced, translated or reduced to
any electronic medium or otherwise without the prior written consent
of the copyright holder.
GEBRUIKERSHANDLEIDING
1. Inleiding
Aan alle ingezetenen van de Europese Unie
Belangrijke milieu-informatie betreffende dit product
Dit symbool op het toestel of de verpakking geeft aan dat,
als het na zijn levenscyclus wordt weggeworpen, dit toestel
schade kan toebrengen aan het milieu. Gooi dit toestel (en
eventuele batterijen) niet bij het gewone huishoudelijke
afval; het moet bij een gespecialiseerd bedrijf
terechtkomen voor recyclage. U moet dit toestel naar uw verdeler of
naar een lokaal recyclagepunt brengen. Respecteer de plaatselijke
milieuwetgeving.