VeriFone V400c Manual

V400CSetup Hardware List
- 1X USB to RJ50 Cable
- 1X Power adapter
- 1X V400 Terminal
1

Connecting the V400C to the Computer
1. Locate the USB to RJ50 cable and plug it into the V400 as shown in figure 1 below.
Hardware List
- 1X USB to RJ50 Cable
- 1X Power adapter
- 1X V400 Terminal
Figure 1 - USB to RJ50 cabLe connected to the V400c.
IntelliPay V400 C Set Up
2

2. Plug in the Ethernet cable as shown in Figure 2 below.. *Note that the V400 requires an Ethernet Connection in
order to communicate the transactions to the gateway. The USB cable is to send the commands
in POS mode to the terminal and receive non-PCI data back to the POS.
IntelliPay V400 C Set Up
Figure 2 - Ethternet cable connected to the V400C
3

3. Connect the power cable to the terminal and first plug the terminal into the PC before powering
on the device itself.
IntelliPay V400 C Set Up
Figure 3 - Power cable connection
4

4. If your Terminal does not look like this when powering It up, you need to contact IntelliPay
support
IntelliPay V400 C Set Up
Figure 4 - acceptance screen
5

Installing the V400 SAAS Service
1. Download the Installer file from the CPTeller site.
2. Hit Next
IntelliPay V400 C Set Up
6

3. Hit Next
IntelliPay V400 C Set Up
7

4. Hit Next and the installer will install the service
IntelliPay V400 C Set Up
8

5. You might be prompted to allow the application to install by windows and also by your antivirus.
When you get to the last screen select Close.
IntelliPay V400 C Set Up
8

6. Another box will be opened up like the one below, You will need to put your Merchant Key and
API key in before continuing.
IntelliPay V400 C Set Up
9