Vertiv Liebert GXT4 Series User manual

GXT4™
700VA - 3kVA
Fully Digital Dual DSP Controlled UPS
Liebert®

2
LIEBERT®GXT4™
Increases in data center density require reliable and high performance power
systems for maximum availability. In the area of critical power, organization require
a dynamic power solution that gives the flexibility while lowering total cost of
ownership.
Introducing the Liebert® GXT4™, a true on-line UPS that delivers continuous, high-
quality AC power to connected equipment with no interruption when transferring
to battery. It protects equipment from virtually all power disturbances caused by
blackouts, brownouts, sags, surges or noise interference.
---
For robust UPS protection up
to 3kVA, the Liebert GXT4
UPS provides industry
leading features in a compact
design:
 Active Eco-Mode delivers best-in-
class eiciency of up to 97% without
compromising availability
 Two Programmable Outlets: can be
programmed for load shedding and
sequential restart if the UPS is in
overload or when selected backup
time remains
 User replaceable, hot-swappable
batteries
 On-line design means zero transfer
time. When utility power fails, your
critical load remains supported by a
seamless flow of power
 Array of value added accessories
bundled with standard unit
 Automatic Frequency Sensing: the
UPS automatically adjusts to the
input frequency, 50Hz or 60Hz
 Mounting Flexibility: rack rails and
tower supports included
 Intelligent Communications: DCIM
and BMS ready
ENERGY® STAR
Certified UPS models
BATTERY
POWER FACTOR
CORRECTION/
RECTIFIER CHARGER
INVERTER
SURGE
SUPPRESSION
UTILITY OUTPUT
DYNAMIC
BYPASS
On-line and Double Conversion UPS for Best in Protection

3
The Liebert® GXT4™ UPS requires
just a slim 2U of rack space, but
provides the capabilities often
found only in larger systems. Get
up to 3kVA of capacity and
battery backup. External battery
cabinets may be added for
extended run time
Liebert® GXT4™ UPS includes:
 Power factor correction
 Internal batteries
 Frequency conversion
 Internal automatic bypass for protection against adverse conditions
 Manual bypass capability
 Support for up to six external battery cabinets
Liebert® GXT4™ UPS is a true on-line
power source, which means power is
always being conditioned and supplied
to the connected device(s), whatever
the quality of power coming in, a pure
sinewave output results to ensure
equipment is protected
Always Protected!
Pure Sinewave
The Protection You Need
fromDamaging Power Problems
Outages
SurgesSags Spikes
Noise
Transient Under-Voltage Frequency
Deviation
Over-Voltage Harmonics
The Liebert® GXT4™ provides maximum resiliency & power protection so
businesses can easily adapt to changing capacity demands.
The Proven Reliability Of True On-Line Power With The
Features You Need Most
 Intuitive LCD Screen - easy-to-follow menu structure for UPS configuration
and control.
 Optimized UPS Monitoring and Control - up to 6-lines of texts providing
more UPS details in just one single view.
 UPS Programming On-Demand - no need to run configuration programs to
adjust UPS parameters. LCD screen allows for straight-forward UPS
programming eliminating the need for a laptop on-site.
 Eicient UPS Troubleshooting - LCD screen shows up the exact UPS fault or
operation status which helps user respond quickly to assess and clear fault.
Intuitive and Intelligent Operation
GX T4-UP S5 kV A
O/P : 2 30V 50Hz 21.7 A
I/P : 230V 50Hz 17.3A
BATT : 100% 9MIN S
LOAD : 0%
GXT4-UPS 3KVA
O/P: 230V 50HZ 11.7A
I/P: 230V 50HZ 13.1A
BATT: 100% 3MINS
LOAD: 100%
Inverter
Indicator
Fault
Indicator
LCD Panel
ESC Button
UP button Down button
Battery
Indicator
Bypass
Indicator
ECO mode
indicator
ENTER
button
Programmable
outlet1 Indicator
Programmable
outlet2 Indicator

4
Liebert®GXT4™
High Availability:
Multiple Choices For
Communication, Shutdown
And Reporting
Low Total Cost Of Ownership:
 Advance Early Warning of UPS System Status - multiple audible and visual
alarms immediately alert you to critical issues
 3-11 minutes of Battery Backup Time at Full load - provides ample time for
an orderly shutdown. Optional matching external battery cabinets oer
additional backup time
 Periodic Battery Testing - provides automatic and manual self-diagnostic
battery testing for peace of mind to indicate if the battery is healthy
 Replaceable Hot Swappable Batteries - easy to replace batteries to protect
your investment by extending the product life
 Power-Factor Correction - prevents noise, harmonics and distortion from
being passed on to connected loads or from being fed back to the utility
 Intelligent Battery Charging - includes eicient three-stage charging
technique and comprehensive discharging protection that extends battery life
 Input Circuit Breaker - Provides increased protection to ease recovery from
overloads
 Lightning and Surge Protection - the transient voltage surge suppression
(TVSS) circuitry inside Liebert GXT4 UPS provides additional protection for the
connected equipment
SNMP And Web-Based Communication
Options
Liebert IntelliSlot Web Card provides
SNMP (including SNMPv3), IPv.6 and
web-based management to your Liebert
GXT4 UPS. It provides the ability to
monitor and control your UPS from your
network management system or any PC
running Microsoft Internet Explorer.
 Sends both SNMP traps and emails
for event notification and
automatically emails a daily UPS
history
 Auto-senses 10M/100M Ethernet
Optional Liebtert MicroPOD Output
Distribution and Maintenance Bypass
Module
When your computer system can’t be
without power, even for scheduled UPS
maintenance, the Liebert MicroPOD
Maintenance Bypass and Output
Distribution Unit ensures continuous
uptime. It allows you to manually transfer
connected equipment to utility power via
a maintenance bypass switch, permitting
scheduled service or UPS replacement
without the need to shut down
connected equipment. Features include:
 2U height minimizes rack space
requirements
 Easy plug-and-play installation
The Liebert GXT4 UPS is also fully
compatible with:
 Liebert Multilink™ shutdown software
(included with the Liebert GXT4 UPS)
 Liebert Nform™ monitoring software
 Liebert Multiport multiplexing unit
 Liebert Intelli Relay Interface Card
 Liebert SiteScan™
 Trellis™ Platform
 USB Communications
 High Output Power - Liebert GXT4 UPS rated output power factor of up to 0.9
better matches switch-mode power supplies used in today’s IT equipment,
providing more eicient utilization of the UPS
 Active Eco Mode - connected equipment can be powered though the bypass
while the inverter remains idle, reducing electricity consumption while raising
eiciency up to 97% without compromise
 Wide Input Voltage Window - prolongs battery life by allowing the UPS to
maximize the use of utility power before transferring to battery when input
voltage exceeds specified limits
 Intelligent Fan Operation - automatically changes rotation speed depending
on system requirements to decrease power consumption and noise
 Arrays of Accessories with Standard Model - extended amount of
accessories bundled with standard model such as rail kit, IS-webcard, etc. saves
capital expenses

5
 Extended Warranty
Choose additional of 1-yr or 3-yr warranty
on top of the 2-yr standard warranty for
worry free maintenance and total peace
of mind.
 Start-up
On-site system start up by a certified
Emerson Network Power Customer
Engineer assures confidence that the
equipment is up and running at optimum
performance
 Preventive maintenance
Regular visits by an Emerson Network
Power Customer Engineer guarantees
higher reliability and availability
 On-site service
Should you experience a problem, we will
dispatch a certified Emerson Network
Power Customer Engineer to repair or
replace your equipment. Response
guaranteed.
While today’s smaller, rack-based UPS
system oer relatively trouble-free operation,
the growing criticality of the systems they
support has increased the cost of downtime.
As a result, the need to maintain these
smaller UPS systems is increasingly
important.
Rear View 2000VA
Rear View 1500VA
Rear View 700VA-1000VA
Rear View 3000VA
Liebert
IntelliSlot Port USB Port
General Output
Receptacle, 2
Programmable
Output
Receptacle #2,2
Input Circuit
Breaker
Terminal
Block
Rs232
Port
Cooling
Fan
External Battery
Connector
Programmable Output
Receptacle #1-2 Input Recep
Liebert
IntelliSlot Port USB Port Input Circuit Breaker C20 Input
Programmable
Outlets #1
Programmable
Outlets #2
Non-Programmable
Outlets
External Battery
Connector
Cooling
Fan
Rs232
Port
Terminal
Communications
Liebert
IntelliSlot Port USB Port Input Circuit Breaker C14 Input
Outlet1 Receptacles
(Programmable)
Dry
Contacts
Outlet Receptacles
Programmable
General
Output
External Battery
Connector
Cooling
Fan
Rs232
Port
Liebert
IntelliSlot Port USB Port
Input Circuit
Breaker
Programmable
Outlets #1
Non-
Programmable
Outlets
Output
Circuit Breakers
Programmable
Outlets #2
General
Output
External Battery
Connector
Cooling
Fan
Rs232
Port
Terminal
Communications
For more information contact:
Power Quality Consultants
9 Jaybel Street Salisbury QLD 4107
CONTACT INFO
Tel: [phone] Email: [email protected]
Learn More at:
www.VertivCo.com

6
Liebert®GXT4™
External Battery Specification
MODEL NUMBER GXT448VBATT GXT472VBATT
Used with UPS Model
GXT4-700RT230,
GXT4-1000RT230,
GXT4-1500RT230,
GXT4-2000RT230
GXT4-3000RT230
DIMENSIONS: H X W X D, MMIN
Unit (with bezel)
85(2U) x 430 x 497.7
(3.3 x 16.9 x 19.7)
85 (2U) x 430 x 602
(3.3 x 16.9 x 23.6)
WEIGHT: KG LB
Unit 32 (70.5) 42 (92.6)
BATTERY PARAMETERS
Type Valve-regulated, non-spillable, lead acid
Quantity x V 2 x 4 x 12V x 9.0Ah 2 x 6 x 12V x 9.0Ah
ENVIRONMENTAL
Operating Temp, °C (°F) 0 to 40 (32 to 104)
Storage Temp, °C (°F) -15 to 50 (5 to 122)
Relative Humidity 0-95% non-condensing
Operating Elevation
Up to 3000m (10,000 ft.) at 40°C (104°F)
15000m (50,000 ft.) maximum
AGENCY
Safety IEC/EN/AS 62040-1:2008, GS mark
Transportation FCC PART 15, Class A=CISPR22 Class A
Safety IEC62040-2 2nd Ed.:2006
Transportation ISTA Procedure 1E
Internal Battery +1 External Battery Cabinet
LOAD
% 700VA 1kVA 1.5kVA 2kVA 3kVA
10 427 334 330 222 302
20 303 166 160 137 139
30 164 138 128 94 95
40 145 108 97 66 66
50 126 92 72 49 48
60 106 72 54 39 41
70 94 56 46 34 34
80 78 48 38 28 27
90 69 40 34 23 23
100 61 37 31 20 21
Internal Battery +4 External Battery Cabinet
LOAD
% 700VA 1kVA 1.5kVA 2kVA 3kVA
10 480 480 480 466 408
20 480 460 444 421 423
30 458 436 340 306 307
40 442 340 309 192 192
50 425 315 205 157 157
60 336 218 165 142 143
70 319 195 153 127 128
80 301 165 141 107 109
90 213 156 130 95 97
100 197 147 112 80 81
Internal Battery +2 External Battery Cabinet
LOAD
% 700VA 1kVA 1.5kVA 2kVA 3kVA
10 408 457 447 426 431
20 434 333 315 201 205
30 329 224 186 149 150
40 273 166 151 124 124
50 203 151 131 97 97
60 164 135 107 75 76
70 153 113 92 61 63
80 142 103 74 50 50
90 131 92 64 41 45
100 121 78 53 38 41
Internal Battery +3 External Battery Cabinet
LOAD
% 700VA 1kVA 1.5kVA 2kVA 3kVA
10 480 480 467 451 455
20 461 442 424 322 325
30 439 337 311 195 196
40 345 305 199 154 155
50 323 208 160 136 136
60 300 166 146 111 112
70 213 155 131 96 98
80 189 144 111 78 79
90 163 132 99 68 70
100 156 122 83 56 60
Battery Runtime Chart
Internal Battery
LOAD % 700VA 1kVA 1.5kVA 2kVA 3kVA
10 105 91 112 81 91
20 62 38 51 37 39
30 37 31 34 23 23
40 32 23 23 16 16
50 27 17 18 12 12
60 22 14 14 9 9
70 18 11 11 7 7
80 15 9 9 5 5
90 13 87 4 4
100 11 6 6 3 3
The times above are approximate. They are based on new, fully charged standard batteries at a temperature of 25°C with 100%
resistive UPS loading. The listed run times can vary by ±5% because of manufacturing variances of the batteries.

7
Internal Battery +5 External Battery Cabinet
LOAD
% 700VA 1kVA 1.5kVA 2kVA 3kVA
10 480 480 480 480 480
20 480 467 457 438 440
30 465 447 431 331 332
40 452 428 333 224 225
50 438 341 307 189 189
60 425 320 208 158 159
70 344 227 167 146 147
80 329 208 158 133 135
90 315 189 148 120 122
100 301 164 139 104 106
Internal Battery +6 External Battery Cabinet
LOAD
%
700VA 1kVA 1.5kVA 2kVA 3kVA
10 480 480 480 480 480
20 480 480 466 450 452
30 480 458 444 420 421
40 462 442 422 319 319
50 451 426 328 217 217
60 440 341 305 186 187
70 428 323 209 159 160
80 368 306 184 148 150
90 336 217 161 137 139
100 325 201 153 126 128
Parameters GXT4-700RT230* GXT4-1000RT230* GXT4-1500RT230* GXT4-2000RT230* GXT4-3000RT230*
Rating 700VA/630W 1000VA/900W 1500VA/1350W 2000VA/1800W 3000VA/2700W
INPUT AC
Voltage Range (typical) 230VAC nominal; variable based on output load
Frequency Range 40Hz ~ 70Hz; Auto Sensing
Input Power Receptacle C14 C20
MECHANICAL PARAMETERS
Dimensions:
H x W x D mm (in)
85 (2U) x 430 x 408
(3.4 x 16.9 x 16.2)
85 (2U) x 430 x 497
(3.3 x 16.9 x 19.6)
85 (2U) x 430 x 602
(3.3 x 16.9 x 23.7)
Weight: kg (lb) 18.2 (40) 23.2 (51.1) 25.5 (56.1) 32.4 (71.4)
OUTPUT AC
Voltage 200/208/220/230/240VAC (user configurable); ±3%
Frequency 50Hz or 60Hz
Waveform Pure Sinewave
Mains (AC)
Mode Overload
The inverter shall be capable of supplying current and voltage for overloads exceeding 100%,
and 105-130% for 1 minute, 131-150% 10 seconds, 151-200% for 1 seconds,
and up to >200% for 5 cycles of full load current.
Charger Current, Amperes 1.3 1.88 2.71 2.5
Output Receptacles C13 x 6 C13 x 6; C19 x 1
ENVIRONMENT PARAMETERS
Operating Temp 0°C to +40°C (+32°F to 104°F)
Storage Temp -15°C to +50°C (5°F to 122°F)
Operating Elevation Up to 3000m (10,000 ft.) at 25°C (77°F) without derating
Audible Noise
< 46 dBA at 1 meter(3.2ft) from the rear;
< 43 dBA, at 1 meter (3.2 ft)
from the front or side
< 45 dBA at 1 meter
(3.2ft) from the front; <
46 dBA at 1 meter
(3.2ft) rear
< 48 dBA at 1 meter (3.2ft) from the front;
< 48 dBA at 1 meter (3.2ft) rear
BATTERY
Type Valve-regulated, non-spillable, lead acid
Qty x V x Rating 4 x 12V x 5.0Ah 4 x 12V x 9.0Ah 6 x 12 x 9.0Ah
Recharge Time
3 hours to 90% capacity after full
discharge with 100% load till UPS
auto-shutdown(Internal Batteries Only)
4 hours 3 hours
AGENCY
Safety IEC/EN/AS 62040-1:2008, GS MARK
RFI/EMI IEC/EN/AS 62040-2 2nd Ed. ( Category C2) = CISPR22 Class A
Surge Immunity IEC/EN 62040-2 2nd Ed ( IEC/EN 61000-4-5)
* Standard model includes the Rail kit for UPS and battery models
* * Specifications are subject to change without any prior notification
Technical Specifications

Liebert-GXT4-700VA-3kVA-BR-EN-Cobranded-PQC-ANZ-v1
VertivCo.com | Vertiv Australia Tel: [phone] Toll Free: 1800 005 161 | Vertiv New Zealand Tel: [phone] Toll Free: 0800 100 877
© 2018 Vertiv Co. All rights reserved. Vertiv, the Vertiv logo and Liebert®GXT4™ are trademarks or registered trademarks of Vertiv Co. All other names and logos referred to are trade names, trademarks or registered trademarks of their respective
owners. While every precaution has been taken to ensure accuracy and completeness herein, Vertiv Co. assumes no responsibility, and disclaims all liability, for damages resulting from use of this information or for any errors or omissions. Specifications
are subject to change without notice.