Videx 6700 Series User manual

66251910 - V2.0 - 30/03/23
- 1 -
6700 Series
Art.6798 - Installation instructions
Art.6798 7" hands free touchscreen videophone for IPure system
A
D
B
C
F
G
E
Fig. 1 Front Fig. 2 Front
DESCRIPTION
7” TFT high-resolution LCD monitor, OSD capacitive touch
screen, 4 buttons congurable for functions: door open, inter-
com call, auto start, camera switching, timed privacy service.
12Vdc or PoE power supply.
2 inputs / 2 outputs.
Wall mounted, white or black nish.
LEGEND
AMicrophone
BTouchscreen display
CPhysical programmable
buttons
DSpeaker
EConnection terminals
FEthernet connector
GUSB connector for Wi-Fi
optional dongle
To download the programming software
IPure Wizard and obtain the latest rmware
and manuals please visit the following web-
site and register
https://service.videx.it/
VIDEOPHONE INITIALISATION
If powering on the videophone (through a PoE switch/router or
an external power supply unit) the display shows the message
“DEVICE NOT INITIALISED”, use the conguration software IPure
Wizard to setup the device and the system.
The informations contained in this manual are valid
for devices with software version 1.6.0 and later.
HOME SCREEN
The Home screen (Fig. 3) includes naviga-
tion buttons, control buttons and general
information:
• Menu button
Navigate to other screens (for details see
“Menu”on pag. 4).
• Current time
(to set see “Date and time”on pag. 6).
• No connection icon
It will appear if there isn’t any internet
connection.
• Wi-Fi signal level
It indicate the level of Wi-Fi signal.
• Missed calls button
View missed calls and access Event log screen
(for details see “Event log”on pag. 3).
• Date, weather information and location
(to set see “Weather location”on pag. 6).
• Thermostat
(for details see “Thermostat”on page 11).
• Control touch buttons
(for details see “Control touch buttons”on pag. 2).
If the display is in standby, simple tap it to activate.
11:12
Monday, July 31, 2023
NW 5.6 km/h
23 °C
London
Summer program
23.0o
45%
23°
22°
14
Menu
button
Date,
weather
and location
info
Control
touch
buttons
No connection icon
Wi-Fi
signal level
Time Missed
calls
button
Thermostat
Fig. 3
Rev.0.1

66251910 - V2.0 - 30/03/23
- 2 -
6700 Series
Art.6798 - Installation instructions
CONTROL TOUCH BUTTONS
SERVICES
Shows the list of secondary services connected to the
device.
1.Tap the desired service.
2.Tap YES button to conrm
or
Tap NO button to return to Services screen.
Tap the button in the top left corner of the screen to return
to the Home screen.
If you can’t see all the outputs, scroll left and right by
swiping the screen with your nger.
SERVICES
Gate
Garden
Main entrance
Street
Back door
Lateral
Garage
Fig. 4
INDOOR STATIONS
Shows the list of indoor stations connected to the de-
vice.
Tap the intercom you want to call: the device starts an intercom-
munication call with the selected indoor station.
or
Tap the button in the top left corner of the screen to return
to the Home screen.
For the functions allowed during a call, please see
“Intercommunicating call” on pag. 10.
If you can’t see all the devices, scroll left and right by
swiping the screen with your nger.
INDOOR STATIONS
Garage
Children's Room
Kitchen
Attic
Main entrance Bedroom
Fig. 5
Fig. 6
OUTDOOR STATIONS AND CAMERAS
Shows the list of video outdoor stations (audio and audio/
video) and surveillance cameras connected to the device.
Tap one of them to activate it: the device shows the camera output.
or
Tap the button to return to the Home screen.
For the functions allowed during a camera recall or
during a video call, please see“During a video call” on
page 10.
If you can’t see all the outdoor stations or cameras, scroll
left and right by swiping the screen with your nger.
OUTDOOR STATIONS AND CAMERAS
Garden Main entrance Back door
PRIVACY ENABLE/DISABLE
Enable or disable the Privacy service for the set time.
Press again to disable the service.
Privacy service disabled
Privacy service enabled
Art.6798 7" hands free touch screen videophone for IPure system

66251910 - V2.0 - 30/03/23
- 3 -
6700 Series
Art.6798 - Installation instructions
Art.6798 7" hands free touch screen videophone for IPure system
EVENT LOG
Shows the incoming, outgoing, missed and rejected
calls for the time day, month and year.
Show type of events
• Tap ALL to see all events.
• Tap MISSED to see missed calls.
• Tap REJECTED to see the calls made but rejected from the
other devices.
Event details
For each event:
• Event type icon:
Outgoing call
(green icon)
Rejected call
(red icon)
Incoming call
(green icon)
Missed call
(red icon)
Surveillance camera
• Name of indoor/outdoor station or surveillance camera in-
volved in the event.
• Date and time.
If you can’t see all the events, scroll up and down by
swiping the screen with your nger.
Event options
Tap an event to access event options:
• Tap the green button in the bottom right corner of the
screen to recall the indoor/outdoor station or activate sur-
veillance camera.
• If the call relates to a indoor station, tap / buttons to play the recorded audio.
Note: audio recording is only available if there is user response, otherwise nothing will be recorded. The entire conversation
will be recorded.
• If the call relates to a video door station, the device shows a snapshot of the video. Tap /buttons to play the recorded video.
Note: the max length of video recording is 1 minute.
• If the call relates to a surveillance camera, the device shows only a snapshot of the video.
• Tap to delete the single event.
• Tap the button in the top left corner of the screen to return to the Event Log screen.
Swipe an event with your nger from right to left to quickly access the following commands:
to view the screenshot or video associated
with the event to delete the single event
Show current Month, Year and All events log
• Tap the button in the top right corner of the screen to see the list for the current month.
• Tap again button to see the list for the current year.
• Tap again button to see the list for all the events.
Notication badge
If there is one or more missed calls, you will see a red badge on the Home screen over with the number of missed events.
Clear Event Log
To clear the complete Event Log, see “Clear Event Log” on page 9.
13 MAY 2023
11 May 2023
11 May 2023
12 May 2023
12 May 2023
12 May 2023
09:36
10:18
10:26
11:50
13:03
ALL MISSED REJECTED
Main entrance
Kitchen
Bedroom
Street
Back door
MAIN ENTRANCE
12 08 20 14:35
Fig. 7
Fig. 8

66251910 - V2.0 - 30/03/23
- 4 -
6700 Series
Art.6798 - Installation instructions
Art.6798 7" hands free touch screen videophone for IPure system
THIRDPARTY INTEGRATIONS
This section essentially consists of a lightweight web
browser suitable for displaying simple web pages. If
you have a third-party device manageable via a web page (for
example alarm system, sprinkler etc) you can add it to this sec-
tion.
The addition of third-party services can be carried
out through the IPure Wizard software or through
the procedure described in the section“Third-party
Integration”on page 8.
• Tap the button to access the list of set third-party services.
The button will only appear if one or more servic-
es have been added previously.
If only one service has been set, this service will
start directly at the press of the button.
• Act on the commands and settings available for the device in use as needed as if you were navigating any website (the options
vary depending on the device).
• Tap the +and –buttons to enlarge and reduce the size of the page.
• Tap the button to reload the page.
• Tap the buttons and to go back and forth in the browsing history.
• Tap the button to close the page and return to the Home screen.
INTEGRATIONS
Alarm Sprinkler
Fig. 9
MENU
To open the Menu tap the icon on the top left cor-
ner of the Home screen.
The following options are available:
• About
• Appearance
• Audio
• Privacy duration
• General
If you can’t see all the options, scroll up and down by
swiping the screen with your nger.
MENU
AboutAbout
Appearance
Audio
Privacy Duration
General
Fig. 10
ABOUT
Provides the following device information:
• Device part number
• Device name
• Software version
• ID
• IP address
• MAC address
• Internal temperature (in °C Degrees Celsius)
• Relative humidity
Tap the button to return to Menu.
APPEARANCE
Enables you to set the dark or light theme.
1.Tap or buttons to select the desired theme.
2.Tap the green button in the top right corner of the screen
to conrm and return to Menu
or
Tap the button to return to Menu without saving the
changes.

66251910 - V2.0 - 30/03/23
- 5 -
6700 Series
Art.6798 - Installation instructions
AUDIO
Enables you to set:
• Ringtone of outdoor station (ten tones available)
• Ringtone of indoor station (ten tones available)
• Ringtone of local bell (ten tones available)
• Number of rings (from 1 to 10, note that the number of rings
is always the same for outdoor stations, indoor stations and
local bell)
• Call tone volume
1.Tap or buttons for each Ringtone section to select the
desired ringtone. The device will play the current ringtone.
2.Tap or buttons of the Number of rings section to select
the desired number of rings.
3.Slide slider to set the desired Call tone volume.
The device will play Tone 1 ringtone at the selected volume.
4.Tap the green button in the top right corner of the screen to conrm and return to Menu
or
Tap the button to return to Menu without saving the changes.
AUDIO
Ringtone
Cameras
Tone 1
Number of
rings
4
Ringtone
Local
Tone 4
Ringtone
Intercoms
Tone 2
Fig. 11
PRIVACY DURATION
Enables you to set the duration of Privacy service from 1 hour to 24 hours or innite.
1.Tap or buttons to select the desired Privacy duration time.
2.Tap the green button to conrm: the device goes back to General sub menu with the selected Privacy time duration
or
Tap the button to return to Menu without saving the changes.
If you can’t see all the options, scroll up
and down by swiping the screen with
your nger.
GENERAL
In the General sub menu the following options are available:
• Software update
• Network
• Language
• Date and Time
• Weather Location
• Link Videx App
• Surveillance Cameras
• Third-party Integration
• Camera Settings
• Thermostat Settings
• Clear Event Log
• Screen Cleaning
• Reset Web Page Password
• Factory Reset
• Reboot
SOFTWARE UPDATE
Enables you to update the device software:
1.Enter the administrator password and then tap the button.
Tap button to delete digits. Tap the button to return to Menu.
2.If the software is already the latest, the device shows the message “Lastest
version already installed”
otherwise
The device starts to download the latest version available and then reboots.
Default administrator password:
9876
To customize the password you must use
the PC IPureWizard software.
NETWORK
Enables you setup and check the Internet connection.
Check the Internet connection
1.Tap Check your Internet connection: the device starts the Internet connection test and reports the results.
Wi-Fi
If you have installed the Wi-Fi optional dongle, you can connect to a Wi-Fi network.
1.Tap Wi-Fi: the device shows a switch to enable or disable the Wi-Fi connection.
2.Tap on the switch to enable Wi-Fi connection: the device shows the list of available Wi-Fi networks and relative Wi-Fi signal level.
3.Select the network you want and tap the button: if necessary, enter your network password.
4.Once you are connected to the network, the device show the IP address, subnet mask, router address, network name and a but-
ton to delete the network: tap it and then tap YES to delete the network, tap NO to go back.
5.Tap the button: the device will reboot and connect to the selected network.
Art.6798 7" hands free touch screen videophone for IPure system

66251910 - V2.0 - 30/03/23
- 6 -
6700 Series
Art.6798 - Installation instructions
LANGUAGE
Enables you to select the device language from English, Italian, French, Spanish, German, Norwegian or Portuguese languages:
1.Tap or buttons to select the desired language.
2.Tap the green button to conrm: the device will reboot automatically and set the selected language.
or
Tap the button to return to Menu without saving the changes.
DATE AND TIME
Enables you to set your timezone or set date and time manually.
The current date, time and timezone are shown on the
rst line.
Set timezone
1.Tap Set Timezone.
2.Tap or left buttons to select the desired geographic area
or UTC (Coordinated Universal Time).
• If you select a geographic area, you can select your city with
the or buttons to the right.
• If you select UTC, you can select the UTC oset hours by in-
creasing/decreasing with the or buttons to the right.
• You can also select the UTC hours oset directly from the
left scroll menu.
3.Tap the green button to conrm: the device will reboot au-
tomatically and set the selected timezone
or
Tap the button to return to Menu without saving the
changes.
Set date and time manually
1.Tap Set date and time manually.
2.Tap or buttons of the corresponding elds to set Year,
Month, Day, Hour and Minute.
3.Tap the green button to conrm: the device goes back to
Date and Time menu with the selected date and time
or
Tap the button to return to Menu without saving the
changes.
SET TIMEZONE
Riga
Rome
Samara
Australia
Europe
Indian
SET TIME MANUALLY
Year
2023
Month
5
Day
13
Hour
11
Minute
12
Fig. 12
Fig. 13
WEATHER LOCATION
Enables you to set the desired location for weather information.
1.Type the location with the touchscreen keyboard.
2.A list of locations will appear: tap the desired location.
3.Tap the green button to conrm: the device goes back to General menu with the selected weather location
or
Tap the button to return to the General menu: a message will appear to save changes or not: tap NO to go back to
edit location or tap YES to discard the changes and return to the General sub menu.
Art.6798 7" hands free touch screen videophone for IPure system

66251910 - V2.0 - 30/03/23
- 7 -
6700 Series
Art.6798 - Installation instructions
LINK VIDEX APP
Enables the device to be connected to the Videx CloudNected
smartphone app.
1.Enter administrator password and then tap the button.
Tap button to delete digits. Tap the button to return to
Menu.
2.Once you enter the correct password the device shows the QR
binding code.
3.Open Videx CloudNected app on your smartphone, login or
register (if you are not registered yet).
4.Tap the icon on the top left corner of the app, next tap“De-
vice Manager”and then tap button on the top right corner
of the screen.
5.Scan the QR code: now your smartphone is connected with
the device.
LINK VIDEX APP
93C2C369A9FEADCF9D16BFF18451EBDE
Scan this QR Code
Fig. 14
SURVEILLANCE CAMERAS
Enables you to add, edit or delete surveillance cameras.
1.Enter the administrator password and then tap the button.
2.The device lists the surveillance cameras connected
3.If you tap one of them you can edit description name and ad-
dress or remove it.
4.If you tap ADD CAMERA you can add a new camera (if it’s
present on the system) by entering:
• Description name
• Complete RTSP URL address
You can also enable Authentication tapping the switch and
entering username and password
5.Tap the green button to conrm: the new camera will ap-
pear in the list and in Camera menu
or
Tap the button to return to the Surveillance Cameras
sub menu: a message will appear to save changes or not.
Tap NO to go back to edit parameters or tap
YES to discard the changes and return to the Sur-
veillance Cameras sub menu.
SURVEILLANCE CAMERAS
Garden
ADD CAMERA
SURVEILLANCE CAMERAS
Back door
Remove Camera
rtsp://192.168.2.101:554
mike.conrad
Authentication
Fig. 15
Fig. 16
Art.6798 7" hands free touch screen videophone for IPure system

66251910 - V2.0 - 30/03/23
- 8 -
6700 Series
Art.6798 - Installation instructions
Art.6798 7" hands free touch screen videophone for IPure system
THIRDPARTY INTEGRATION
Enables you to add, edit or delete third-party integrations. For
details see “Third-party integrations”on page 4.
Add a new third-party integration
1.Enter the administrator password and then tap the button.
2.Tap ADD INTEGRATION.
3.Enter a description name and the complete third-party URL
address.
4.Tap the green button to conrm: the new integration will
appear in the list and in Integrations menu
or
Tap the button to return to the Third-party Integra-
tions sub menu: a message will appear to save changes
or not. Tap NO to go back to edit parameters or
tap YES to discard the changes and return to the
Third-party Integrations sub menu.
Edit a third-party integration
1.Enter the administrator password and then tap the button.
2.Tap one of the integrations then tap the corresponding eld
to edit description name and address.
3.Tap the green button to conrm
or
4.Tap the button to return to the Third-party Integra-
tions sub menu: a message will appear to save changes
or not. Tap NO to go back to edit parameters or
tap YES to discard the changes and return to the
Third-party Integrations sub menu.
Delete a third-party integration
1.Enter the administrator password and then tap the button.
2. Tap one of the integrations then tap REMOVE. Tap NO to go back without removing or tap YES to conrm.
THIRD-PARTY INTEGRATION
Alarm
ADD INTEGRATION
THIRD-PARTY INTEGRATION
Alarm
Remove Camera
http://www.videx.it
Fig. 17
Fig. 18
CAMERA SETTINGS
Enables you to adjust contrast, brightness and hue of the pic-
ture coming from any outdoor station.
1.Enter the administrator password and then tap the button.
2.The device show the list of the video outdoor stations con-
nected: tap one of them to adjust it.
3.The device shows the picture coming from the selected cam-
era: slide contrast, brightness and hue sliders to ad-
just the image, the results are immediately visible.
4.Tap the green button to conrm: the device saves the set-
tings and goes back to the Home screen
or
Tap the button to return to the General menu: a message
will appear to save changes or not: tap NO to go
back to adjust or tap YES to discard the changes and return to Home screen.
MAIN ENTRANCE SETTINGS
Fig. 19

66251910 - V2.0 - 30/03/23
- 9 -
6700 Series
Art.6798 - Installation instructions
THERMOSTAT SETTINGS
Enables you to enable or disable the Thermostat feature and
calibrate the temperature.
Enable or disable the Thermostat
1.Tap the switch “Thermostat” to enable or disable the Thermo-
stat feature: the Thermostat widget will appear on the Home
screen
(For more details see “Thermostat” on page 11).
Videx Cloud Thermostat
You can track and set the thermostat by your smartphone with
Videx Cloudnected App connected to your installation.
1. Tap the switch“Videx CloudNected App”to enable or disable it.
To enable this function you must have:
• IPure Wizard PC software, version 2.9.0 or greater
• 6798 updated rmware, version 1.5.0 or greater
• Videx CloudNected App, version 2.1.0 or greater
1.Open IPure Wizard and upload the system to the Cloud
Note: this operation must be performed by a compe-
tent installer.
If the system is already uploaded to the cloud, you have
to upload it again.
2.Once the system is uploaded to the cloud, go to the thermo-
stat settings and enable both the “Thermostat” and “Videx
CloudNected App”switches.
3. Now, the thermostat will be available to the CloundNected App.
Thermostat Settings
Temperature Calibration
Thermostat
Videx CloudNected App
Fig. 20
Temperature calibration
Enables you to set a temperature oset from -2.5 to +2.5 ºC.
1.Tap Temperature Calibration
2.Change the temperature with and buttons.
3.Tap the green button to conrm
or
tap to return to previous screen without saving the changes.
CLEAR EVENT LOG
Enables you to delete the Event log.
1.Enter the administrator password and then tap the button.
2.Tap YES button to conrm
or
Tap NO button to return to General sub menu.
SCREEN CLEANING
Enables you to disable touch screen for 10 seconds for screen cleaning.
1.Tap YES button to start Screen cleaning mode: a 10 seconds countdown will start.
or
Tap NO button to return to General sub menu.
2.At the end of countdown the device goes back to General sub menu and the touchscreen is available again.
RESET WEB PAGE PASSWORD
Enables you to reset the password to access the Internal Web
Server.
1.Enter the administrator password and then tap the button.
2. Tap
YES
button to reset the password
or
Tap
NO
button to return to the General sub menu
without change.
Default credentials:
Username: admin
Password: videx
For more details about Internal Web Server and how
to personalize the password, see“Internal Web Serv-
er” on page 15
FACTORY RESET
Enables you to restore the device to the factory settings.
1.Enter the administrator password and then tap the button.
2.Tap YES button to reset the device
or
Tap NO button to return to General sub menu.
REBOOT
Enables you to reboot the device.
1.Tap YES button to reboot
or
Tap NO button to return to General sub menu.
Art.6798 7" hands free touch screen videophone for IPure system

66251910 - V2.0 - 30/03/23
- 10 -
6700 Series
Art.6798 - Installation instructions
Art.6798 7" hands free touch screen videophone for IPure system
DURING A VIDEO CALL
During a call coming
from an outdoor station
(or during a camera re-
call) you’re able to make
the following opera-
tions and adjustments:
Activate a secondary service
Activate a secondary camera input
Enable or disable microphone
Audio/Video adjustments
Reject or close the call
Activate a secondary service
1.Tap icon: an overlay menu will appear with secondary ser-
vices available.
2.Tap one of them, then tap YES to activate it and
return to the previous screen.
Tap NO to return to the previous screen without
activating any secondary service.
3.Tap again to close the overlay menu.
Activate a secondary camera input
1.Tap icon: an overlay menu will appear with secondary cam-
era’s available.
2.Tap one of them: you will see camera image in Picture in Pic-
ture mode.
3. Tap on Picture in Picture to show it in full screen: in this mode
you can view the input from other camera’s using the and
buttons.
4.Tap the image to close the full screen mode and return to Pic-
ture in Picture mode.
5.Tap to close the secondary video.
6.Tap again to close the overlay menu.
Enable or disable microphone
1.Tap icon to disable the
microphone
2.Tap again to reactivate it.
Microphone enabled
Microphone disabled
Audio/Video adjustments
1.Tap icon: the following
sliders will appear:
2. Slide any of them to make
the related adjustment.
Tap again to close the menu.
Contrast
Brightness
Hue
Speaker volume
Snapshot
By default, on every videocall or camera recall, the device takes
a snapshot that will be a still frame of the video recording.
To see the snapshot and the related video go to Event log and
tap the related event. For details see “Event log”on page 3.
Reject or close the call
Tap to reject or close the call
MAIN ENTRANCE SETTINGS
Fig. 21
MAIN ENTRANCE
Fig. 22
INTERCOMMUNICATING CALL
During a call coming
from an indoor station
you’re able to make the
following operations
and adjustments:
Enable or disable microphone
Audio/Video adjustments
Reject or close the call
Enable or disable microphone
1.Tap icon to disable the
microphone
2.Tap again to reactivate it.
Microphone enabled
Microphone disabled
Speaker volume adjustment
1.Tap icon: the Speaker volume slider will appear.
2. Slide it to make the adjustment. Tap again to close the menu.
Reject or close the call
Tap to reject or close the call.
MAIN ENTRANCE
Fig. 23

66251910 - V2.0 - 30/03/23
- 11 -
6700 Series
Art.6798 - Installation instructions
Art.6798 7" hands free touch screen videophone for IPure system
THERMOSTAT
This section allows you to control your thermostat (after required connections are made).
Note: for proper operation, internal or remote relays that control the thermoregulation must be set in latch mode. To
perform this setting you must use the IPure Wizard programming software.
11:12
Monday, July 31, 2023
NW 5.6 km/h
23 °C
London
Summer program
23.0o
45%
23°
22°
14
Fig. 24
Mode
Smart
scheduling
Current
temperature
Current
program Suspend/resume
program
Temperature
Target
temperature
Relative
humidity
ENABLE THE THERMOSTAT FEATURES
From the Home screen:
1.Tap Menu .
2.Tap General.
3.Scroll down the list and tap Thermostat.
4.Move the switch to ON: the widget will now ap-
pear on the Home screen.
MODE CHANGE
From the Home screen:
1.Tap Mode (it’s the button on the left of the tem-
perature).
2.Select the desired mode between
Summer , Winter and O
3.Tap OK to set the selected mode
or
Tap CANCEL to return to Home screen with-
out change the current setting.
MANUAL OVERRIDE TEMPERATURE SETTING
It enables you to set the desired temperature manually until it is reached or for a set time.
From the Home screen:
1.Tap Current temperature.
2.Increase and decrease the value using and buttons.
3.If you want to time the setting duration, tap button: set hours and minutes using the respective and buttons. Tap to set
the selected time or to return to the previous screen without setting the time.
4. Tap to set the selected temperature and time
or
Tap to return to Home screen without change the current setting.
11:12
22.0o
Sunday, 31 July 2023
NW 5.6 km/h
London
Fig. 25
11:12
01 30
:
22.0°
Sunday, 31 July 2023
NW 5.6 km/h
London
Fig. 26
11:12
Thermostat
23.0o
22°
01:29
23°
45%
Sunday, 31 July 2023
NW 5.6 km/h
London
Fig. 27
The remaining time of the manual override setting will be shown in the upper left corner in blue.

66251910 - V2.0 - 30/03/23
- 12 -
6700 Series
Art.6798 - Installation instructions
Art.6798 7" hands free touch screen videophone for IPure system
SMART SCHEDULING
Allows you to set up to 10 weekly programs according to your needs.
Create a program
From the Home screen:
1.Tap to enter the Smart scheduling.
2.Tap the button in the top right corner of the screen to add
a new program.
3. Digit the program name (Ie.“Summer Program”) and tap enter.
To start the program from the Smart scheduling
screen, press the respective button.
Tap to stop it.
SMART SCHEDULING
Summer program
Winter program
Holidays program
Fig. 28
Program customization
From the Smart scheduling screen:
1.Tap on the program you want to customize: the weekdays
and time slots will be shown.
2.Tap the desired day.
3.Set the start and end time and the desired temperature with
the respective and buttons.
4.If you want to set this time slot only for the day tap the
No, this day only button. The device will return to
the previous screen.
or
If you want to replicate the multi-day time slot tap the but-
ton Yes, select days button:
5.Select the days you want to replicate the setting and tap the
Go on button.
6.If you want to continue with the programming tap the
Yes, go on button
or
If you want to nish programming tap the
No, close button.
To start the program from the customization screen,
press the START button.
Tap STOP to stop it.
To add more time slots, tap the button and repeat
the procedure.
The maximum number of time slots per day is 8.
Add Time Slot
Add Time Slot
Add Time Slot
Add Time Slot
Add Time Slot
STOP
M
W
T
F
S
S
00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
16171819
20 21 22 23 24
Summer program
Add Time Slot
Add Time Slot
Fig. 29
SET TIME SLOT
Do you want to repeat this time slot for the other week days?
0700 00
Start End Temperature
:30 18.0
o
:
Yes, select days No, this day only
Fig. 30
Duplicate or delete a single daily schedule
From the program screen:
1.Swipe left on the day you want to duplicate or delete.
2.Tap the button to duplicate, then select the days and con-
rm.
3.Tap the to delete and conrm on the next screen.

66251910 - V2.0 - 30/03/23
- 13 -
6700 Series
Art.6798 - Installation instructions
Manually suspend the active program
From the Home screen:
1.Tap the button placed next to the name of the running
program.
2.Tap the MANUAL RESTART button to manually suspend
the program
or
Tap the SUSPEND... button to set the sleep time: set the
hours and minutes with the respective and buttons,
tap CONFIRM or CANCEL to cancel and return to
the previous screen
or
Tap the END THE PROGRAM button to terminate the
program immediately.
Rename or delete a program
From the Smart scheduling screen:
1.Tap the program you want to rename or delete.
2.Tap the button to rename the program.
3.Tap the button to delete and conrm on the next screen.
Duplicate or delete a program
From the Smart scheduling screen:
1.Swipe left on the program you want to duplicate or delete.
2.Tap the button to duplicate.
3.Tap the button to delete and conrm on the next screen.
SELECT DAYS
Select the days to wich you want to assign this time slot
M T T F S SW
Go on
Fig. 31
Add Time Slot
Add Time Slot
Add Time Slot
Add Time Slot
Add Time Slot
STOP
W
T
F
S
S
00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
Summer program
18°C
+ +
18°C 22°C 24°C 15°C
M
T
Fig. 32
To manually restart the program from the Home
screen, press the button .
Art.6798 7" hands free touch screen videophone for IPure system

66251910 - V2.0 - 30/03/23
- 14 -
6700 Series
Art.6798 - Installation instructions
SIP CLIENT
This device has an integrated SIP client with the following features:
• H264 video codec (Constrained Baseline Level 3.1, up to 1280×720 @30fps)
• PCMU/PCMA/G722/opus audio codecs
• Video preview
• Direct call
• DTMF RFC2833/SIPINFO
• Transport: UDP
To enable and congure this feature you must use the latest version of IPure Wizard software.
TACTILE PROGRAMMABLE PUSH BUTTONS DEFAULT SETTINGS
Standby In conversation
Call Disabled Accept call / close conversation
Open Disabled Trig current door panel output
Service Disabled Disabled
Privacy
Enable / disable
privacy Reject call / close conversation
The four tactile buttons (Fig. 1 C)are fully programmable us-
ing the programming software IPure Wizard.
INPUTS DEFAULT SETTINGS
Standby In conversation
IN1 Local bell Local bell
IN2 Disabled Trig current door panel output
OUTPUTS DEFAULT SETTINGS
OUT1 Disabled
OUT2 Thermostat output for heating / cooling
The inputs and outputs settings are fully programmable using
the programming software IPure Wizard.
TECHNICAL SPECIFICATIONS
Housing and mounting: 6700 Series - Surface
Display resolution: 800 x 480 pixel
Push buttons: 4
SIP compatibility: SIP 2.0
Programming: Through touchscreen or PC IPure
Wizard software
Power consumption: Standby: 400mA
Operating: 600mA
Working voltage: 12Vdc - 650mA or
PoE 802.3af (Class 0 - 12.95W)
CONNECTION TERMINALS SIGNALS
OUT2 Relay 2
C& NO dry contacts Max 35Vdc
50mA
OUT2
OUT1 Relay 1
C& NO dry contacts
OUT1
GNDI Ground for IN1 and IN2 inputs
IN2 Active low input 2
IN1 Active low input 1
GNDI
RS-485 connectionB
A
GND 12 Vdc - 650mA power supply input.
This is not used if the videophone is connected to a
PoE Switch or Router
+12V
OUT2 OUT2 OUT1 OUT1
GNDI IN2 IN1 GNDI
B
A GND +12V
Art.6798 7" hands free touch screen videophone for IPure system

66251910 - V2.0 - 30/03/23
- 15 -
6700 Series
Art.6798 - Installation instructions
INTERNAL WEB SERVER
The device allows you to access some features through PC or
tablet and smartphone.
First access
1.Open a browser on a PC, tablet or smartphone and enter
the complete IP address of the device in the address bar:
I.E: http://192.168.1.123
2.Insert the defalut credentials:
Username: admin
Password: videx
3.Click/tap Login
NOTE:
• The client (PC, smartphone, tablet) must be on the same LAN/
WLAN network.
• To nd the device IP address, from the home screen, tap Menu
icon, then About.
• httpsprotocol is not supported.
The followings options are available:
• Screenshot
• Video Recordings
• Audio Recordings
• Change Password
• Application Log
• Logout
Screenshots, Video Recordings and Audio Recordings
Displays screenshots, video recordings, and audio les captured
by the device.
These are the same events that can be viewed in the Event log
menu on the device.
For each event the name of the device, date and time of the
event is indicated.
Full screen mode, downloads and other features depend on
browser.
Click/tap Back to return to menu.
Change Password
Allows you to personalize the access password.
1.Enter the current password, the new password and conrm.
2.Click/tap Submit to conrm
or
Click/tap Back to return to menu without changing the
password.
To reset the password to default see“Reset Web Page
Password”on page 9.
Username is always the same (admin).
Application Log
Allows you to download a log le of the device for diagnostic purposes.
Logout
Logout from the web server.
Fig. 33
Fig. 34
Fig. 35
Art.6798 7" hands free touch screen videophone for IPure system

66251910 - V2.0 - 30/03/23
- 16 -
6700 Series
Art.6798 - Installation instructions
WALL MOUNTINGI INSTRUCTIONS
12
A
A
Fig. 1 Fig. 2
135cm
Fig. 3
Fig. 4
B
Fig. 5 Fig. 6
2
1
Fig. 7
WARNING: Remeber to remove the mains before installing the videomonitor.
1. Remove the cover inserting a 5.5mm at screwdriver into both the clips Athen rotate clockwise until you listen a “CLICK!”(Fig. 1).
2.Pull outwards the left part of the cover. Don’t pull the cover straight (Fig. 2).
3.Put the cover in a horizontal position on the wall leaving approx 135cm between the lower side of the back cover and the
nished oor (Fig. 3).
4.Mark the point for the xing holes remembering that the wires must be fed through the hole B(Fig. 4).
5.Make the holes, insert the wall plugs and x the back cover with the screws feeding the wires into the hole B(Fig. 5).
6. Connect the wires to the terminals following the provided installation diagram and the Ethernet cable to LAN connector (Fig. 6).
7.Close the unit: rst hook in the right part and then the left part until you hear a “CLICK!” (Fig. 7).
Art.6798 7" hands free touch screen videophone for IPure system

66251910 - V2.0 - 30/03/23
- 17 -
Serie 6700
Art.6798 - Istruzioni di installazione
Art.6798Videocitofono viavoce touchscreen 7" per sistema IPure
A
D
B
C
F
G
E
Fig. 1 Fronte Fig. 2 Interno
DESCRIZIONE
Monitor LCD TFT High-Resolution, OSD touch screen capaciti-
vo, 4 pulsanti congurabili per funzioni: apri porta, chiamata
intercomunicante, auto accensione, commutazione telecame-
ra, servizio privacy temporizzato. Alimentazione 12Vdc o PoE. 2
in/2out. Installazione a parete, colore bianco.
LEGENDA
AMicrofono
BDisplay touchscreen
CPulsanti sici
programmabili
DAltoparlante
EMorsettiera di connessione
FConnettore Ethernet
GConnettore USB per don-
gle Wi-Fi opzionale
Le informazioni contenute in questo manuale sono valide
per i dispositivi con software versione 1.6.0 e successive.
Per scaricare il software di programmazione
IPure Wizard ed ottenere gli ultimi aggiorna-
menti di rmware e manuali è necessario regi-
strarsi sul sito web
https://service.videx.it/
INIZIALIZZAZIONE VIDEOCITOFONO
Se alimentando il videocitofono (attraverso uno switch/router
PoE o tramite alimentatore esterno) il display mostra il messag-
gio“DEVICE NOT INITIALISED”, utilizzare il software congurato-
re IPure Wizard per impostare il dispositivo e il sistema.
SCHERMATA HOME
La schermata Home (Fig. 3) include i pul-
sati di navigazione, pulsanti di controllo
e informazioni Generali:
• Pulsante Menù
Navigazione verso altre pagine (vedere
“Menù”a pag. 20 per i dettagli).
• Orario corrente ( per impostazioni
vedere “Data e ora”a pag. 22).
• Icona connessione assente
Compare se non c’è alcuna connessio-
ne internet.
• Livello segnale Wi-Fi
Indica il livello del segnale Wi-Fi.
• Pulsante chiamate perse
Visualizza le chiamate perse e consente
l’accesso al Registro Eventi (vedere
“Registro Chiamate”a pag. 19 per
i dettagli).
• Informazioni data, meteo e località
(per impostazioni vedere “Località meteo”a pag. 22).
• Termostato (vedere “Termostato” a pag. 27 per i dettagli).
• Pulsanti di controllo touch (vedere “Pulsanti di controllo touch”a pag. 18 per i dettagli).
Se il display è in standby, toccarlo per riattivarlo.
11:12
Domenica, 31 Luglio 2022
23.0o
23°
22°
Programma estivo
45%
14
NW 5.6 km/h
Milano
Pulsante
Menù
Informazioni
data, meteo
e località
Pulsanti di
controllo
touch
Icona
connessione assente
Livello
segnale Wi-Fi
Orario Pulsante
chiamate
perse
Termostato
Fig. 3
Rev.0.1

66251910 - V2.0 - 30/03/23
- 18 -
Serie 6700
Art.6798 - Istruzioni di installazione
PULSANTI DI CONTROLLO TOUCH
SERVIZI
Mostra la lista dei servizi secondari connessi al dispo-
sitivo.
1.Toccare il servizio desiderato.
2.Toccare il pulsante SI per confermare
oppure
Toccare il pulsante NO per ritornare alla schermata
Servizi.
Toccare il pulsante nell’angolo in alto a sinistra del display per
ritornare alla schermata Home.
Se non è possibile visualizzare tutti le uscite, scorrere
lo schermo a sinistra e a destra con il dito.
SERVIZI
Cancello
Giardino
Entrata principale
Strada
Porta retro
Laterale
Garage
Fig. 4
POSTI INTERNI
Mostra la lista dei posti interni connessi al dispositivo.
Toccare il posto interno che si vuole chiamare: il dispositivo avvia
una chiamata intercomunicante con il posto interno selezionato.
oppure
Toccare il pulsante nell’angolo in alto a sinistra del display per
ritornare alla schermata Home.
Per le operazioni ammesse durante la chiamata, con-
sultare“Chiamata intercomunicante” a pag. 26.
Se non è possibile visualizzare tutti i dispositivi, scor-
rere lo schermo a sinistra e a destra con il dito.
POSTI INTERNI
Garage
Cameretta
Cucina
Attico
Entrata principale Camera
Fig. 5
Fig. 6
POSTI ESTERNI E VIDEOCAMERE
Mostra la lista dei posti esterni (audio e audio/video) e
delle videocamere di sorveglianza connesse al dispostivo.
Toccare uno di essi per attivarlo: il dispositivo mostra il video
proveniente dalla videocamera.
oppure
Toccare il pulsante per ritornare alla schermata Home.
Per le operazioni ammesse durante un’auto-accen-
sione oppure durante una chiamata video, consultare
“Durante una chiamata video”a pag. 26
Se non è possibile visualizzare tutti i posti esterni,
scorrere lo schermo a sinistra e a destra con il dito.
POSTI ESTERNI E VIDEOCAMERE
Giardino Entrata principale Porta retro
ABILITARE/DISABILITARE IL SERVIZIO PRIVACY
Abilita o disabilita il servizio Privacy per il tempo im-
postato.
Premere nuovamente per disabilitare il servizio.
Servizio Privacy disabilitato
Servizio Privacy abilitato
Art.6798 Videocitofono viavoce touchscreen 7" per sistema IPure

66251910 - V2.0 - 30/03/23
- 19 -
Serie 6700
Art.6798 - Istruzioni di installazione
Art.6798 Videocitofono viavoce touchscreen 7" per sistema IPure
REGISTRO CHIAMATE
Mostra il registro delle chiamate in ingresso, in uscita,
perse e riutate ordinate per ora, data mese e anno.
Visualizzare il tipo di eventi
• Toccare TUTTE per visualizzare tutti gli eventi.
• Toccare PERSE per visualizzare le chiamate perse.
• Toccare RIFIUTATE per visualizzare le chiamate eettuate
ma riutate da altri dispositivi.
Dettagli eventi
Per ogni evento:
• Icona tipo evento:
Chiamata in uscita
(icona verde)
Chiamata riutata
(icona rossa)
Chiamata in entrata
(icona verde)
Chiamata persa
(icona rossa)
Videocamera di sor-
veglianza
• Nome del posto interno/esterno o della videocamera di sor-
veglianza coinvolta nell’evento.
• Data e ora.
Se non è possibile visualizzare tutti gli eventi, scorrere
lo schermo a in alto ed in basso con il dito.
Opzioni eventi
Toccare un evento per accedere alle opzioni:
• Toccare il pulsante verde nell’angolo in alto a destra del
display per richiamare il posto interno/esterno o attivare la
videocamera di sorveglianza.
• Se la chiamata è relativa a un posto interno, toccare i pulsanti / per riprodurre l’audio registrato.
Nota: la registrazione audio è disponibile solo se c’è una risposte dell’utente, altrimenti non verrà registrato nulla. Verrà regi-
strata l’intera conversazione.
• Se la chiamata è relativa ad un posto esterno video, il dispositivo mostra un fotogramma del video.Toccare i pulsanti /per
riprodurre il video registrato.
Nota: la lunghezza massima della registrazione video è di 1 minuto.
• Se la chiamata è relativa ad una videocamera di sorveglianza, il dispositivo mostra solo un fotogramma del video.
• Toccare per cancellare il singolo evento.
• Toccare il pulsante nell’angolo in alto a sinistra del display per ritornare alla schermata del Registro Chiamate.
Scorrere un evento con il dito da destra verso sinistra per accedere rapidamente ai seguenti comandi:
per visualizzare lo screenshot o il video
associato all’evento per eliminare il singolo evento
Visualizzare il registro del Mese corrente, dell'Anno corrente e di tutti gli eventi
• Toccare il pulsante nell’angolo in alto a destra del display per visualizzare la lista per il mese corrente.
• Toccare nuovamente il pulsante per visualizzare la lista per l’anno corrente.
• Toccare nuovamente il pulsante per visualizzare la lista per tutti gli eventi.
Badge di notica
Se è presente più di una chiamata persa, verrà visualizzato un badge rosso nella schermata Home sopra il pulsante con l’indi-
cazione del numero di eventi persi.
Cancellare il Registro Chiamate
Per cancellare tutto il Registro Chiamate, vedere “Cancellare il Registro Chiamate”a pag. 19.
ENTRATA PRINCIPALE
ENTRATA PRICIPALE
12 08 20 14:35
Fig. 7
Fig. 8

66251910 - V2.0 - 30/03/23
- 20 -
Serie 6700
Art.6798 - Istruzioni di installazione
INTEGRAZIONE SISTEMA DI TERZE PARTI
Questa sezione consiste essenzialmente di un browser
web leggero adatto per la visualizzazione di pagine
web semplici. Se si dispone di un dispositivo di terze parti gesti-
bile tramite pagina web (ad esempio sistema di allarme, irriga-
tore, ecc) è possibile aggiungerlo a questa sezione.
L’aggiunta di servizi di terze parti può essere eettua-
ta tramite software IPure Wizard o tramite la proce-
dura descritta nella sezione“Integrazione sistema di
terze parti” a pag. 24.
• Toccare il pulsante per accedere alla lista dei servizi di terze
parti.
Il pulsante apparirà solo se uno o più servizi sono
stati aggiunti in precedenza.
Se è stato impostato un solo servizio, esso verrà
avviato direttamente alla pressione del pulsante .
• Agire sui comandi e le impostazioni disponibili per il dispositivo in uso come se si stesse consultando qualsiasi sito web (le opzioni
variano a seconda del dispositivo).
• Toccare i pulsanti +e –per ingrandire e ridurre la pagina.
• Toccare il pulsate per ricaricare la pagina.
• Toccare i pulsanti e per andare avanti e indietro nella cronologia di navigazione.
• Toccare il pulsate per chiudere la pagina e tornare alla schermata Home.
13 MAGGIO 2022
11 Maggio 2023
11 Maggio 2023
12 Maggio 2023
12 Maggio 2023
12 Maggio 2023
09:36
10:18
10:26
11:50
13:03
TUTTE PERSE RIFIUTATE
Entrata principale
Cucina
Camera
Strada
Porta retro
Fig. 9
MENÙ
Per aprire il Menù toccare l’icona nell’angolo in alto
a sinistra della schermata Home.
Sono disponibili le seguenti opzioni:
• Info
• Aspetto
• Audio
• Durata Privacy
• Generali
Se non è possibile visualizzare tutte le opzioni, scorre-
re lo schermo a in alto ed in basso con il dito.
MENÙ
Info
Aspetto
Audio
Durata Privacy
Generali
Fig. 10
INFO
Fornisce le seguenti informazioni:
• Nome articolo
• Nome dispositivo
• Versione software
• ID
• Indirizzo IP
• Indirizzo MAC
• Temperatura interna (in gradi Celsius °C)
• Umidità relativa
Toccare il pulsante per ritornare al Menù.
ASPETTO
Consente di impostare il tema scuro o chiaro:
1.Toccare i pulsanti o per selezionare il tema desiderato.
2.Toccare il pulsante verde nell’angolo in alto a destra del
display per confermare e ritornare al Menù
oppure
Toccare il pulsante per ritornare al Menù senza salvare le
modiche.
Art.6798 Videocitofono viavoce touchscreen 7" per sistema IPure