VISIONARY DESIGNS MOD-1327 User manual

© 2018
Order #XXXXX
SETUP INSTRUCTIONS
If you would like to tell us about your experience with your setup instructions please email us at [email protected]
MOD-1327 Counter Assembly
Completed Assembly
Item
1
2
Qty.
1
3
Description
46” Q914 Vertical Extrusion
8” S44 Vertical Extrusion
Steps:
1) Assemble counter top. See Counter Top Assembly detail.
2) Attach extrusion [1] to assembled cabinet, using washers and bolts.
3) Attach extrusions [2] to assembled cabinet, using washers and bolts from inside cabinet.
2
1
2
2
Flange
Plate
Counter Top
Assembled Cabinet
*
Counter Top Assembly
*
1
Flange
Plate
Fixed
Screw
Counter Top
Attach flange plate to extrusion [1] using washer and
bolt. Place fixed screws of counter top into holes of
flange plate then secure with washers and wing nuts.

© 2018
Order #XXXXX
DO NOT USE POWER TOOLS
ALL CONNECTIONS MUST
BE TIGHTLY SECURED
Part Identification - Numbering
Spline Connection Base Plate & Extrusion Connection
General Setup Instructions
- Read entire setup instruction manual prior to
unpacking parts and pieces.
- The setup instructions are created specifically
for this configuration.
- Setup instructions are laid out sequentially in
steps, including exploded views with detailed
explanation for assembly.
WARNING
Cleaning & Packing
- For Cleaning Metal, Plex, & Laminate Parts:
Use a MILD NON-ABRASIVE cleanser and
soft cloth/paper towel to clean all surfaces.
- Keep exhibit components away from heat
and prolonged sun exposure.
Heat and UV exposure will warp and
fade components.
- Retain all provided Packing Materials.
All provided packing materials are for
ease of repacking & component protection.
Disassembly
- For loss prevention, tighten all setscrews
and locks during disassembly
7A
Hex Tool - Essential for Assembly
Extrusion & Lock Connection Engaged Lock
LADDERS OR LIFTS
MAY BE REQUIRED
General Information