VistaLab ali-Q User manual

aspirate button
dispense button
1. Set aliquot volume on dial
For aliquoting
aliquot button 3. Press & hold aliquot button
until the aliquot is dispensed. You will
hear and feel the motor come on. Repeat
for each aliquot. (For maximum precision,
discard first aliquot.)
Note: if you don’t hold the button long enough for the
full aliquot volume, you will hear an “alert” sound and red
light will flash.
2. Aspirate adequate volume for
total number of desired aliquots.
When you first receive your ali-QTM,
press the purple aliquoting button
to wake the unit out of shipping mode.
Please Read
aliquot dial
For standard serological pipetting
Note: The motor will activate at
seemingly random times when
pressing the aspirate or dispense
buttons. Don’t worry. It’s normal!
For more information on ali-Q’s
intelligent measuring system,
see Operating Manual at
www.vistalab.com/support

Description VistaLab Catalog #
ali-Q pipet controller 2000-0005
ali-Q LS pipet controller 2000-0003
Additional box contents:
spare 0.45 mm membrane filter 9020-4005
power supply w/outlet adapters 9020-9005
wall mount 9020-9008
calibration certificate
2 Geneva Road Brewster, NY 10509 USA
[phone]; [phone]
customer[email protected]
©2017 VistaLab Technologies, Inc. All rights reserved.
Think Differently. Feel Better. L080-0052-001 RevB
Complete your optimal liquid handling system with
Wobble-notTM serological pipets VistaLab Catalog #
5 mL (200/cs) 4090-0005
10 mL (200/cs) 4090- 0 0 1 0
25 mL (200/cs) 4090-0025
50 mL ( 100 /c s) 4090-0050
Go to www.vistalab.com/support
for full Operating Manual
Register your ali-Q
online at
www.vistalab.com
for 1 year Warranty