VS 02970 User manual

3
VS Vereinigte Spezialmöbelfabriken GmbH & Co.KG
Hochhäuser Straße 8 · 97941 Tauberbischofsheim · Tel.: [phone] · [email protected]
http://links.vs-service.com/downloads/70-122_V05_DEENFR_Ergo-140938.pdf
INSTRUCTIONS FOR USE: 70-122 V05 030920
Ergo.
02970, 02971, 02974, 02975.
Intended use:
This desk has been designed exclusively for use in schools,
colleges and training establishments and is therefore in-
tended solely for this purpose. Any other use that goes be-
yond the intended purpose (e.g. in workshops, storage areas
or damp locations) is classed as not in accordance with the
intended use. The company VS Vereinigte Spezialmöbelfab-
riken GmbH&Co.KG shall not be held liable for damage aris-
ing from such non-intended use.
General note on reading and storing the
instructions:
Please read these instructions and in particular the notes on
safety carefully and in full before using the products. Keep
the instructions in a safe place for subsequent reference and
pass them on to other users.
General note on safety:
We use the following symbols and notes in our assembly
instructions:
Caution! This symbol refers to n important note
on assembly.
On the internet:
Alternatively, they can be downloaded: (see header title).
Standardize:
Tested according to DIN EN 1729 Part 1 + 2, size class 3 to 7.
Scope of delivery:
The product is delivered fully assembled.
Operation:
Follow the instructions on the following page.
Troubleshooting and service:
If faults occur, please contact our
Aftersales Service [email protected]
Maintenance and Cleaning
On the internet: vs.de/kataloge/reinigung/en
Forwarding / disposal:
Also pass on these assembly instructions if the product is
forwarded to another party. Please contact your relevant
local authority for information on environmentally compatible
disposal.

4
1 2
1. Table height adjustment (Bild 1)
- Stepless height adjustment from 56.5 to 82 cm
- Height continuously adjustable from size 3 to 7 by
means of a maintenance-free angular gear.
- Height can be read off the scale to be found on the
inner tube.
2. Table top adjustment (Bild 2)
(only for Models 02974 and 02975)
- The table top can be steplessly inclined from 0° to 16°
using the maintenance and wear free adjusting mech-
anism.
- Turn the locking handle anticlockwise through 90° (un-
derneath the table top on the pupil’s side) and hold it.
- Grip the desktop at the sides and move it until it
slopes at the required angle.
- Release the handle which returns to its original
position thereby locking the table top.
3. With castors (optional)
Before performing this operation, make sure that there is
nothing on the desk. Only clear, empty desks may be moved
on their castors. To prevent damage to the castors, do not
wheel the desks over door sills or uneven surfaces.
Caution! Only lift the desk by a small amount as it
may otherwise tip over.
Desk lifted a small amount by user.