Worx Landroid User manual

INSTALLATION
GUIDE

Installation guide EN P04
Installationsanleitung D P20
Guide d'installation F P36
Guida d'installazione I P52
Guía de instalación ES P68
Installatiegids NL P84
Instrukcja instalacji PL P100
Průvodce instalací CZ P116
Sprievodca inštaláciou SK P132
Navodila za namestitev SL P148

4
EN
How to install your Landroid®M
The installation of the Landroid
®
M is easy. Depending on the size of your garden, the entire process only
takes a short amount of time. If you are like us, you hate wasting your time to mow your lawn. The
Landroid
®
M will prove to be a great investment, providing you with years of lawn care.
You can watch the installation demo video at www.worxlandroid.com.
The Landroid®M loves to mow
It is designed to mow often, maintaining a healthier and better looking lawn than ever before. Depending on the
size of your lawn, the Landroid
®
M may be programmed to operate at any time or frequency with no restrictions. It
is here to work for you.

5
EN
In the box
Preparation
From your shed
Distance gauge
Hex key
Scissors Hammer
Landroid®MCharging base
Base fixing
nails
Wire pegs
Boundary
wire reel
Owner’s manual
Warranty
statement
Installation
guide
Spare blades
Power Adaptor
Programming and
trouble shooting
guide

6
EN
Landroid®M's new home-your garden
Let's start by having a closer look at Landroid®M’s new home—your lawn—highlighting the areas where it
can safely go and areas it’s best for Landroid®M to avoid.
When hitting any obstacle that’s rigid, stable and taller than
15cm—such as a wall or a fence—your Landroid®M will simply
stop and re-direct away from the obstacle.
Obstacles that can be hit
Stones that are heavy enough not to be moved by your
Landroid®M can be safely hit. However, if any stone has an
inclined surface that your Landroid®M can climb, you should
either remove it or exclude it from the working area.
Stones
If your driveway is level with your lawn, without any protruding surface,
the Landroid®M can freely run over it. If you'd like the Landroid®M to
avoid it, then only a 10cm* space between the Boundary Wire and the
driveway is needed.
If it’s covered with gravel, you should not allow the Landroid®M to travel
over it, using the distance gauge for spacing in this case, keeping a
35cm* space between the boundary wire and the driveway.
*This is the recommended distance. Use the provided distance gauge
to ensure proper installation.
Driveways
You certainly don’t want your Landroid®M to mow your flowers,
or fall into the water. These areas should be avoided.
Flowerbeds, ponds, pools...

7
EN
35% (20°)
If there are roots emerging from the ground, these areas should
be avoided in order not to damage the roots.
Trees
In the case of large bumps or dips, please consider if the blades
could touch the ground; if this is the case, either make the
inclines smoother or exclude those areas from your Landroid®M’s
operation.
Depressions and bumps
Your Landroid®M has the ability to safely climb slopes up to 35%
(20°), so just avoid anything steeper than this.
Slopes
The Upper Boundary Wire should NOT be placed on slopes
steeper than 35% (20°).The Upper Boundary Wire should have
a distance of at least 35cm between any obstacles. The Lower
Boundary Wire should NOT be placed on slopes steeper than
25% (15°).The Lower Boundary Wire should have a distance of
at least 45cm between any obstacles when it is positioned on a
slope that is 25%.
Placement of Boundary Wire on slopes
Upper boundary wire
Lower boundary
Wire
Lower boundary
Wire

8
EN
10cm
35cm
35cm
35cm
35cm
35cm
35cm
>1m
Installation
See details on step 2.2
See details on step 2.1
See details on step 2.3
See details on step 1 & 3
CHARGING
BASE

9
EN
10cm
35cm
35cm
35cm
35cm
35cm
35cm
>1m
See details on step 2.5
See details on step 2.7
See details on
step 2.4

10
EN
First of all, find a spot for the charging base, taking into account the position of your outdoor socket since the charging base only has a
15m power cord.
NOTE: Make sure the adaptor and the electrical socket are always kept in a dry area.
Your Landroid
®
M needs to know where to mow.This is why you have to mark its working area with a boundary wire
that will form an invisible fence.This wire will also guide your Landroid
®
M to its charging base.
If your neighbor also uses a Landroid
®
M , then you must keep a space of at least 0.5 metres between your
Boundary Wire and your neighbor's.
The charging base should be placed along a straight line, with
the “IN” arrow pointing to the lawn. Allow 2m distance with no
obstacles both front and back of the charging base. If possible, place
the charging base in the shade, as batteries are better recharged in a
cool place.
1.1
Make sure that your Landroid®M can run on a flat area, clear of any
obstacles.
Feed the boundary wire through the tunnel underneath the
charging base.
1.2
1. Placing the Charging Base