Worx WG801E User manual

P08
P21
P37
P52
P67
P82
P97
P112
P127
P141
P155
P169
P184
P197
Cordless shrub shear / grass shear / weeder
Akku-Strauchschere / Rasenschere / Unkrautjäter
Cisailleuse à arbustes sans fil / tondeuse à gazon / déherbeuse
Cesoia per arbusti senza fili / cesoia per erba / sarchiatore
Cizalla para arbustos sin cable / cizalla para hierba / desmalezadora
Draadloze struikschaar/grasschaar
$NXPXODWRURZHQRİ\FHGRNU]HZyZQRİ\FHGRWUDZ\FKZDVWRZQLN
$NNXVFVHUpSYiJiVIĬQ\tUyJ\RPLUWy
)RDUIHFĆGHDUEXVWIĆUĆÀUIRUIHFDUHGHLDUEĆSOLYLWRU
$NXPXOiWRURYpQĪçN\QDNHĢHQĪçN\QDWUiYXSOHĀND
$NXPXOiWRURYpQRçQLFHQDNUtN\QRçQLFHQDWUiYXSOHĀND
Cisalhamento de arbusto / cisalhamento de grama / cortador sem fio
Trådlös buskskjuvning / grässkjuvning / ogräsrensare
6WULçHQMHEUH]DNXPXODWRUMDVWULçHQMHWUDYHSOHYHO
EN
D
F
I
ES
NL
PL
HU
RO
CZ
SK
PT
SV
SL
WG801E WG801E.1 WG801E.2 WG801E.3
WG801E.4 WG801E.5 WG801E.9 WG801E.91

Original instructions EN
Originalbetriebsanleitung D
Notice originale F
Istruzioni originali I
Manual original ES
Oorspronkelijke gebruiksaanwijzing NL
Instrukcja oryginalna PL
Eredeti használati utasítás HU
,QVWUXFĦLXQLRULJLQDOH 52
3ĪYRGQtQiYRGNSRXçtYiQt &=
3{YRGQìQiYRGQDSRXçLWLH 6.
Manual original PT
Bruksanvisning i original SV
Izvirna navodila SL

13
16
14
15
12
11
10
9
4
65 78
3
2
1

CLICK!
2
1
1
1
1
2
1
1
2
B3
D
B1
A2
A1
B2
D
B4

2
1
1
2
WG801E.4
WG801E.5
WG801E.3
1
2
2
2
2´
1
100%
0%
WG801E
WG801E.1
WG801E.2
D
D
C5
C4
C3
D
C1 C2

ED
F
3
1
2
Click!
I
H2
H1
G

1
2
1
2
D
J1 J2
K

EN
Cordless shrub shear /
grass shear / weeder
8
GENERAL POWER TOOL
SAFETY WARNINGS
WARNING: Read all
safety warnings and
all instructions. Failure to
follow the warnings and
instructions may result in
electric shock, fire and/or
serious injury.
Save all warnings and
instructions for future
reference.
The term “power tool” in
the warnings refers to your
mains-operated (corded)
power tool or battery-
operated (cordless) power
tool.
1.WORK AREA SAFETY
a)Keep work area clean
and well lit. Cluttered
or dark areas invite
accidents.
b)Do not operate power
tools in explosive
atmospheres, such
as in the presence
of flammable liquids,
gases or dust. Power
tools create sparks which
may ignite the dust or
fumes.
c)Keep children and
bystanders away while
operating a power tool.
Distractions can cause
you to lose control.
2.ELECTRICAL SAFETY
a)Power tool plugs must
match the outlet.
Never modify the
plug in any way. Do
not use any adapter
plugs with earthed
(grounded) power
tools. Unmodified plugs
and matching outlets will
reduce risk of electric
shock.
b)Avoid body contact
with earthed or
grounded surfaces,
such as pipes,
radiators, ranges and
refrigerators. There is an
increased risk of electric
shock if your body is
earthed or grounded.
c)Do not expose power
tools to rain or wet
conditions. Water
entering a power tool will
increase the risk of electric
shock.
d)Do not abuse the cord.
Never use the cord
for carrying, pulling or
unplugging the power
tool. Keep cord away
from heat, oil, sharp

EN
Cordless shrub shear /
grass shear / weeder
9
edges or moving parts.
Damaged or entangled
cords increase the risk of
electric shock.
e)When operating a
power tool outdoors,
use an extension cord
suitable for outdoor
use. Use of a cord
suitable for outdoor use
reduces the risk of electric
shock.
f) If operating a power
tool in a damp location
is unavoidable, use a
residual current device
(RCD) protected
supply. Use of an RCD
reduces the risk of electric
shock.
3.PERSONAL SAFETY
a)Stay alert, watch what
you are doing and use
common sense when
operating a power tool.
Do not use a power
tool while you are tired
or under the influence
of drugs, alcohol or
medication. A moment
of inattention while
operating power tools
may result in serious
personal injury.
b)Use personal
protective equipment.
Always wear eye
protection. Protective
equipment such as dust
mask, non-skid safety
shoes, hard hat, or
hearing protection used
for appropriate conditions
will reduce personal
injuries.
c)Prevent unintentional
starting. Ensure
the switch is in the
off-position before
connecting to power
source and/or battery
pack, picking up or
carrying the tool.
Carrying power tools with
your finger on the switch
or energising power tools
that have the switch on
invites accidents.
d)Remove any adjusting
key or wrench before
turning the power tool
on. A wrench or a key left
attached to a rotating part
of the power tool may
result in personal injury.
e)Do not overreach.
Keep proper footing
and balance at all
times. This enables
better control of the
power tool in unexpected

EN
Cordless shrub shear /
grass shear / weeder
10
situations.
f) Dress properly. Do not
wear loose clothing
or jewellery. Keep
your hair, clothing
and gloves away from
moving parts. Loose
clothes, jewellery or long
hair can be caught in
moving parts.
g)If devices are provided
for the connection of
dust extraction and
collection facilities,
ensure these are
connected and
properly used. Use of
dust collection can reduce
dust-related hazards.
4.POWER TOOL USE AND
CARE
a)Do not force the power
tool. Use the correct
power tool for your
application. The correct
power tool will do the job
better and safer at the rate
for which it was designed.
b)Do not use the power
tool if the switch does
not turn it on and off.
Any power tool that
cannot be controlled with
the switch is dangerous
and must be repaired.
c)Disconnect the plug
from the power source
and/or the battery
pack from the power
tool before making
any adjustments,
changing accessories,
or storing power tools.
Such preventive safety
measures reduce the risk
of starting the power tool
accidentally.
d)Store idle power
tools out of the reach
of children and do
not allow persons
unfamiliar with the
power tool or these
instructions to operate
the power tool. Power
tools are dangerous in the
hands of untrained users.
e)Maintain power
tools. Check for
misalignment or
binding of moving
parts, breakage of
parts and any other
condition that may
affect the power tool’s
operation. If damaged,
have the power
tool repaired before
use. Many accidents
are caused by poorly
maintained power tools.

EN
Cordless shrub shear /
grass shear / weeder
11
f) Keep cutting tools
sharp and clean.
Properly maintained
cutting tools with sharp
cutting edges are less
likely to bind and are
easier to control.
g)Use the power
tool, accessories
and tool bits etc. in
accordance with these
instructions, taking
into account the
working conditions
and the work to be
performed. Use of the
power tool for operations
different from those
intended could result in a
hazardous situation.
5.BATTERY TOOL USE
AND CARE
a)Recharge only with
the charger specified
by the manufacturer. A
charger that is suitable for
one type of battery pack
may create a risk of fire
when used with another
battery pack.
b)Use power tools
only with specifically
designated battery
packs. Use of any other
battery packs may create
a risk of injury and fire.
c)When battery pack
is not in use, keep it
away from other metal
objects, like paper
clips, coins, keys, nails,
screws or other small
metal objects, that can
make a connection
from one terminal to
another. Shorting the
battery terminals together
may cause burns or a fire.
d)Under abusive
conditions, liquid
may be ejected from
the battery; avoid
contact. If contact
accidentally occurs,
flush with water. If
liquid contacts eyes,
additionally seek
medical help. Liquid
ejected from the battery
may cause irritation or
burns.
6.SERVICE
a)Have your power
tool serviced by a
qualified repair person
using only identical
replacement parts.
This will ensure that the
safety of the power tool is
maintained.

EN
Cordless shrub shear /
grass shear / weeder
12
HEDGE TRIMMER SAFETY
WARNINGS
1.Keep all parts of the
body away from the
cutter blade. Do not
remove cut material
or hold material to
be cut when blades
are moving. Make
sure the switch is off
when clearing jammed
material. A moment
of inattention while
operating the hedge
trimmer may result in
serious personal injury.
2.Carry the hedge
trimmer by the handle
with the cutter
blade stopped. When
transporting or storing
the hedge trimmer
always fit the cutting
device cover. Proper
handling of the hedge
trimmer will reduce
possible personal injury
from the cutter blades.
3.Hold the power tool
by insulated gripping
surfaces only, because
the cutter blade may
contact hidden wiring.
Cutter blades contacting
a “live” wire may make
exposed metal parts of
the power tool “live” and
could give the operator an
electric shock.
4. Check the hedge for
foreign objects, e.g. wire
fences.
5. Use both hands when
operating the hedge
trimmer. Using one
hand could cause loss
of control and result in
serious personal injury.
GENERAL SAFETY
WARNINGS
WARNING: Read all
safety warnings and
all instructions. Failure to
follow the warnings and
instructions may result in
electric shock, fire and/or
serious injury.
Save all warnings and
instructions for future
reference.
The appliance is only to
be used with the power
supply unit provided
with the appliance
IMPORTANT
READ CAREFULLY
BEFORE USE
KEEP FOR FUTURE
REFERENCE

EN
Cordless shrub shear /
grass shear / weeder
13
SAFE OPERATION
PRACTICES
TRAINING
a) Read the instructions
carefully. Be familiar
with the controls and
the proper use of the
machine.
b) Never allow children,
persons with reduced
physical, sensory or
mental capabilities or
lack of experience and
knowledge or people
unfamiliar with these
instructions to use
the machine. Local
regulations can restrict
the age of the operator.
c) Keep in mind that the
operator or user is
responsible for accidents
or hazards occurring to
other people or their
property.
PREPARATION
a) Never operate the
machine while people,
especially children, or pets
are nearby.
b) Before use, always
visually inspect the
machine for damaged,
missing or misplaced
guards or shields.
OPERATION
a) Wear eye protection,
long trousers and stout
shoes at all times while
operating the machine.
b) Avoid using the machine
in bad weather conditions
especially when there is a
risk of lightning.
c) Use the machine only in
daylight or good artificial
light.
d) Never operate the
machine with damaged
guards or shields or
without guards or shields
in place.
e) Switch on the motor only
when the hands and feet
are away from the cutting
means.
f) Always disconnect the
machine from the power
supply (e.g. remove the
battery pack)
- whenever leaving the
machine unattended;
- before clearing a
blockage;
- before checking, cleaning
or working on the
machine;
- after striking a foreign
object;
- whenever the machine
starts vibrating

EN
Cordless shrub shear /
grass shear / weeder
14
abnormally.
g) Take care against injury to
feet and hands from the
cutting means.
h) Always ensure that the
ventilation openings are
kept clear of debris.
i) Always be sure of your
footing on slopes.
j) Walk, never run.
k) Not overreach and keep
the balance at all times.
l) Not to touch moving
hazardous parts
before the machine is
disconnected and the
moving hazardous parts
have come to a complete
stop.
MAINTENANCE AND
STORAGE
a) Disconnect the machine
from the power supply
(e.g. remove the battery
pack) before carrying out
maintenance or cleaning
work.
b) Use only the
manufacturer’s
recommended
replacement parts and
accessories.
c) Inspect and maintain the
machine regularly. Have
the machine repaired only
by an authorized repairer.
d) When not in use, store the
machine out of the reach
of children.
SAFETY WARNINGS FOR
BATTERY PACK
a)Do not dismantle,
open or shred cells or
battery pack.
b)Do not short-circuit
a battery pack. Do
not store battery
packs haphazardly
in a box or drawer
where they may short-
circuit each other or
be short-circuited by
conductive materials.
When battery pack is not
in use, keep it away from
other metal objects, like
paper clips, coins, keys,
nails, screws or other
small metal objects, that
can make a connection
from one terminal to
another. Shorting the
battery terminals together
may cause burns or a fire.
c)Do not expose battery
pack to heat or fire.
Avoid storage in direct
sunlight.
d)Do not subject battery

EN
Cordless shrub shear /
grass shear / weeder
15
pack to mechanical
shock.
e)In the event of battery
leaking, do not allow
the liquid to come into
contact with the skin
or eyes. If contact
has been made, wash
the affected area with
copious amounts
of water and seek
medical advice.
f) Seek medical advice
immediately if a cell or
battery pack has been
swallowed.
g)Keep battery pack
clean and dry.
h)Wipe the battery
pack terminals with a
clean dry cloth if they
become dirty.
i) Battery pack needs to
be charged before use.
Always refer to this
instruction and use
the correct charging
procedure.
j) Do not maintain
battery pack on charge
when not in use.
k)After extended periods
of storage, it may be
necessary to charge
and discharge the
battery pack several
times to obtain
maximum performance.
l) Battery pack gives
its best performance
when it is operated
at normal room
temperature (20°C ±
5°C).
m)When disposing
of battery packs,
keep battery
packs of different
electrochemical
systems separate from
each other.
n)Recharge only with the
charger specified by
WORX. Do not use any
charger other than that
specifically provided for
use with the equipment. A
charger that is suitable for
one type of battery pack
may create a risk of fire
when used with another
battery pack.
o)Do not use any battery
pack which is not
designed for use with
the equipment.
p)Keep battery pack
out of the reach of
children.
q)Retain the original
product literature for
future reference.

EN
Cordless shrub shear /
grass shear / weeder
16
r) Remove the battery
from the equipment
when not in use.
s)Dispose of properly.
t) Do not mix cells of
different manufacture,
capacity, size or type
within a device.
u)Do not remove battery
pack from its original
packaging until
required for use.
v)Observe the plus (+)
and minus (–) marks on
the battery and ensure
correct use.
SYMBOLS
To reduce the risk of injury, user
must read instruction manual
Wear ear protection
Wear eye protection
Wear dust mask
Do not expose to rain
WARNING: cutting means
continues to run after the motor is
switched off
Keep bystanders away
Class III appliance
Waste electrical products must not
be disposed of with household
waste. Please recycle where fa-
cilities exist. Check with your local
authorities or retailer for recycling
advice.
Li-Ion batteryThis product has
been marked with a symbol relat-
ing to ‘separate collection’ for all
battery packs and battery pack. It
will then be recycled or dismantled
in order to reduce the impact on
the environment. Battery packs can
be hazardous for the environment
and for human health since they
contain hazardous substances.
Batteries may enter water cycle if
disposed improperly, which can
be hazardous for ecosystem. Do
not dispose of waste batteries as
unsorted municipal waste.
Do not burn
Make sure the battery is removed
prior to changing accessories.
Wear protective gloves.
Lock

EN
Cordless shrub shear /
grass shear / weeder
17
Unlock
COMPONENT LIST
1. GRASS SHEAR BLADE
2. LOCK-OFF BUTTON
3. HANDLE
4. BATTERY PACK *
5. BATTERY PACK RELEASE BUTTON *
6. ON/OFF SWITCH
7. TOOL-FREE DRIVE COVER
8. TOOL-FREE DRIVE COVER RELEASE
BUTTON
9. SHRUB SHEAR BLADES (2 PCS) *
10. WEEDER BLADE *
11.
LOCK-OFF BUTTON ON TELESCOPIC HANDLE
(ONLY FOR WG801E.1 WG801E.3)
12. TELESCOPIC POLE HANDLE (Only for
WG801E.1 WG801E.3)
13. ON/OFF SWITCH ON TELESCOPIC HAN-
DLE (ONLY FOR WG801E.1 WG801E.3)
14. LOCKING KNOB (Only for WG801E.1
WG801E.3)
15. INNER HANDLE (ONLY FOR WG801E.1
WG801E.3)
16. CONNECTION BRACKET (Only for
WG801E.1 WG801E.3)
* Not all the accessories illustrated or
described are included in standard delivery.
TECHNICAL DATA
WG801E
WG801E.2 WG801E.1
Voltage 20 V Max*
No Load
Speed 1150 rpm
Cutting
width
10cm with grass shear blade
/
Cutting
length 12/20cm with shrub blade 12cm
Max.
cutting
diameter 8mm for shrub blade
Charging
time 5 hrs
Charger
rating Input: 100-240V~50/60Hz Output: 20V 400mA
Machine
weight:
(with grass
shear
blade)
0.9 kg
WG801E.3 WG801E.4 WG801E.5
Voltage 20 V Max*
No Load
Speed 1150 rpm
Cutting
width
10cm with grass shear blade
/5.5cm with weeder
blade
Cutting
length 12cm 12/20cm with shrub blade
Max.
cutting
diameter 8mm for shrub blade
Charging
time 1 hr
Charger
rating Input: 100-240V~50/60Hz Output: 20V 2A
Machine
weight:
(with grass
shear
blade)
0.9 kg
WG801E.9 WG801E.91
Voltage 20 V Max*
No Load
Speed 1150 rpm
Cutting
width
10cm with grass shear blade
/5.5cm with weeder
blade
Cutting
length 12/20cm with shrub blade
Max.
cutting
diameter 8mm for shrub blade
Charging
time /
Charger
rating /

EN
Cordless shrub shear /
grass shear / weeder
18
Machine
weight:
(with grass
shear
blade)
0.5kg
*Voltage measured without workload. Initial battery
voltage reaches maximum of 20 volts. Nominal
voltage is 18 volts.
NOISE INFORMATION
A weighted sound pressure LpA: 66dB(A)
A weighted sound power LwA:82dB(A)
KpA 3.0dB(A)
Wear ear protection
VIBRATION INFORMATION
Typical weighted
vibration
ah<3.6m/s2
uncertainty K=1.5m/s²
WARNING:The vibration emission value during
actual use of the power tool can differ from the
declared value depending on the ways in which the
tool is used dependant on the following examples and
other variations on how the tool is used:
How the tool is used and the materials being cut or
drilled.
The tool being in good condition and well
maintained.
Using the correct accessory for the tool and ensuring
it is sharp and in good condition.
The tightness of the grip on the handles and if any
anti vibration accessories are used.
And the tool is being used as intended by its design
and these instructions.
This tool may cause hand-arm vibration
syndrome if its use is not adequately managed.
WARNING: To be accurate, an estimation of
exposure level in the actual conditions of use
should also take account of all parts of the operating
cycle such as the times when the tool is switched off
and when it is running idle but not actually doing the
job.This may significantly reduce the exposure level
over the total working period.
Helping to minimise your vibration exposure risk.
Maintain this tool in accordance with these
instructions and keep well lubricated (where
appropriate).
If the tool is to be used regularly then invest in anti
vibration accessories.
Plan your work schedule to spread any high vibration
tool use across a number of days.
ACCESSORIES
WG801E WG801E.1 WG801E.2 WG801E.3
10cm Grass shear blade 1111
12cm Shrub shear blade 1111
20cm Shrub shear blade 1/1/
Blade sheath 3232
Battery pack (WA3551) 1111
Charger (WA3760) 111 /
Charger (WA3880) ///1
Telescopic Handle (WA0040) /1/1
Injection box //1/
Carry bag ////
Weeder blade / / / /
WG801E.4 WG801E.5 WG801E.9 WG801E.91
10cm Grass shear blade 1111
12cm Shrub shear blade 1111
20cm Shrub shear blade 1111
Blade sheath 3333
Battery pack (WA3551) 11/ /
Charger (WA3760) ////
Charger (WA3880) 11/ /
Telescopic Handle (WA0040) ////
Injection box ////
Carry bag 1// /
Weeder blade / 1 / 1
We recommend that you purchase your accessories
listed in the above list from the same store that sold
you the tool. Refer to the accessory packaging for
further details. Store personnel can assist you and
offer advice.

EN
Cordless shrub shear /
grass shear / weeder
19
OPERATING INSTRUCTIONS
NOTE: Before using the tool, read the
instruction book carefully.
INTENDED USE
The product is intended for light trimming of shrubs
and lawn edges in domestic use.
ASSEMBLY & OPERATION
ACTION FIGURE
ASSEMBLY (Fitting/Changing the
blade)
Removing the blade
Warning: Wear gloves when changing
the blade.
See Fig.
A1, A2
Fitting the blade See Fig.
B1, B2
Fitting and removing the weeder blade See Fig.
B3, B4
BEFORE OPERATION
Checking the battery condition (Only
for WG801E/WG801E.1/WG801E.2/
WG801E.3/WG801E.4/WG801E.5) See Fig. C1
Charging the battery pack
More details can be found in charger’s
manual
See Fig.
C2,C3
Installing the battery pack See Fig. C4
Removing the battery pack See Fig. C5
OPERATION
Starting& Stopping See Fig. D
Trimming grass
NOTE: Keep the tool away from hard
objects and delicate plants.To make a
closer cut, slightly tilt the tool.
See Fig. E
Trimming hedges and shrubs
NOTE: Take care to avoid any foreign
objects. Especially avoid hard objects
such as metal wire and railings, as
these could damage the blades.
See Fig. F
Weeding grass
NOTE: To ensure efficient operation,
blade cleaning should be performed in
time after each work.
See Fig. G
Operating with the telescopic handle
(Only for WG801E.1 WG801E.3)
Assembling/removing the telescopic
handle
NOTE:
-Install the battery pack first before
assembling the telescopic handle.
-Make sure the telescopic handle is
locked into position securely before
operation.
-Keep hands away from the on/off
switch when attach or remove the
telescopic handle to prevent accidental
start.
See Fig.
H1, H2
Adjusting the handle length
NOTE: The locking knob is used to hold
the handle in position at any extended
length.
See Fig. I
Adjusting the cutting height
NOTE: The telescopic handle has two
cutting height levels (25mm &43mm).
See Fig.
J1, J2
Starting and stopping with the
telescopic handle
Warning: Do not use the shrub
shear blades (12cm/20cm) when
working with the telescopic handle.
See Fig. K
MAINTENANCE
NOTE: To ensure long and reliable service, carry out
the following maintenance regularly.
Remove the battery before carrying out any
adjustment, servicing or maintenance.
Check for obvious defects such as loose, dislodged or
damaged blade, loose fixings and worn or damaged
components.
Check that covers and guards are undamaged and
correctly fitted. Carry out necessary maintenance or
repairs before using.
BLADE MAINTENANCE
Always clean the cutting blades after operation and
periodically lubricating the cutting blade.
Visually check the condition of the cutting edges of
the cutting blade.
Ensure that the blade is covered with the blade guard
supplied when not in use.
CLEANING/STORAGE
Clean the exterior of the machine thoroughly using
a soft brush and cloth. Do not use water, solvents
or polishes. Remove all debris, especially from the
ventilation slots.
Store the machine in a secure dry place out of reach
of children. Do not place other objects on top of the
machine.

20
EN
Cordless shrub shear /
grass shear / weeder
20
ENVIRONMENTAL
PROTECTION
Waste electrical products must not be disposed
of with household waste. Please recycle where
facilities exist. Check with your local authorities
or retailer for recycling advice.
DECLARATION OF
CONFORMITY
We,
POSITEC Germany GmbH
Grüner Weg 10, 50825 Cologne, Germany
Declare that the product,
Description WORX cordless shrub shear and
grass shear
Type WG801E WG801E.1 WG801E.2 WG801E.3
WG801E.4 WG801E.5 WG801E.9 WG801E.91
(800-809-designation of machinery,
representative of grass shear/shrub)
Function Cutting grass, trimming hedges and
brushes
Complies with the following Directives,
2006/42/EC
2014/30/EU
2011/65/EU&(EU)2015/863
2000/14/EC amended by 2005/88/EC
2000/14/EC amended by 2005/88/EC:
- Conformity Assessment Procedure as per Annex V
- Measured Sound Power Level 79.4dB (A)
- Declared Guaranteed Sound Power Level 82dB (A)
Standards conform to,
EN 60335-1
EN 50636-2-94
EN 62233
EN ISO 3744
EN 55014-1
EN 55014-2
EN 60745-1
EN 60745-2-15
The person authorized to compile the technical file,
Name Marcel Filz
Address Positec Germany GmbH
Grüner Weg 10, 50825 Cologne, Germany
2019/10/16
Allen Ding
Deputy Chief Engineer,Testing & Certification
PositecTechnology (China) Co., Ltd.
18, Dongwang Road, Suzhou Industrial
Park, Jiangsu 215123, P. R. China