Yale Assure Lock YRD216 Technical specifications

P/N YRD216-MNL-0002 Rev G
1
®
FAILURE TO FOLLOW THESE INSTRUCTIONS COULD RESULT IN DAMAGE TO THE PRODUCT, VOIDING THE FACTORY WARRANTY AND COULD LEAD TO FAILURE OF THE PRODUCT TO PROVIDE ACCESS.
Yale Assure Lock
® ®
Keypad Deadbolt
Installation and Programming Instructions
(YRD216)
• Add your Assure Lock to your smart home system or August App*
This manual will walk you through all the required steps to add your new
Yale Assure Lock to your door.
• Remove Existing Door Hardware
• Double Check Door Measurements
• Install your Assure Lock
• Program your Assure Lock
Before you begin
for step-by-step installation
instructions & to register
your product
DOWNLOAD
THE BILT APP
Tools Needed
Standard
Phillips Head
Screwdriver
Utility Knife
Drill Wood Mortise
Chisel
Pencil
Tape
Measure
Level
Tools necessary only for new doors
or adjusting existing door
*If purchased with Yale Smart Module or Connected by August Kit

P/N YRD216-MNL-0002 Rev G
2
What's In The Box
Loosen screw to
remove cover
Inside Lock Assembly
(Separates into 3 components)
Battery Cover
Inside Lock Mounting Plate
Installation Guide Envelope
(Includes this manual and
door checker with template)
Mounting Hardware
The mounting hardware box includes 12 components
Strike Plate
Adjustable
Deadbolt
Strike Plate
and
Deadbolt Screws
Inside Lock
Screws Optional
Security
Strike Plate
Screws
Let's Get Started
Keypad
4 AA Batteries
Long through bolt for
1-3/4" - 2-1/4"
Door Thickness
Keys
Optional Yale
Smart Module
Optional
Fire Kit Parts

P/N YRD216-MNL-0002 Rev G
3
1Removing Existing Door Hardware
Do not discard old lock hardware until Assure Lock has been successfully installed.
Frame

P/N YRD216-MNL-0002 Rev G
4
New Door Marking Template
2
Door Checker
Check Door Measurements and
Make Adjustments If Needed
Use door checker from installation guide envelope to verify your door measurements and make any needed adjustments.
With door checker, use template from installation guide envelope to prep a new door that has not been predrilled for hardware.
Inside of Door
Installing Optional Fire Cup
O
optional

P/N YRD216-MNL-0002 Rev G
x2
3
Actual Size
*Deadbolt latch position is based
on backset. Choose position
appropriate for your door.
Reference Door Checker
measurements E and F.
default
*2-3/8" Backset
*2-3/4" Backset
Installing Latch & Strike Plate
Press
Pull
Bolt must be in retracted
(unlocked) position. Note horizontal
orientation of tailpiece slot and UP
orientation of deadbolt latch. Backset
Actual Size
x2
Choose
standard
strike plate
screws or
security
screws.
Actual Size
O
optional
Bolt must be
in retracted
(unlocked)
position.
x2
5

P/N YRD216-MNL-0002 Rev G
6
4Installing Keypad
Outside of Door
Inside of Door
Bolt must be in retracted
(unlocked) position. Note
horizontal orientation of
mechanism.
!O
optional

P/N YRD216-MNL-0002 Rev G
7
5
x2
Actual Size
Installing Inside Mounting Plate
O
optional

6Attaching the Cable Assembly
Use cable hooks to
ensure proper routing.
Do not pinch wire.
Ensure cable is
securely fastened
into adapter.
!
P/N YRD216-MNL-0002 Rev G
8

P/N YRD216-MNL-0002 Rev G
9
x3
7Installing Inside Lock
Actual Size
is vertical. If the thumbturn
does not move freely, refer
to the hardware
troubleshooting steps.
Ensure thumbturn

P/N YRD216-MNL-0002 Rev G
10
Testing Mechanical Operation
If thumbturn operation fails, check the installation beginning with Step 5.
!
Bolt must be in retracted
(unlocked) position before
installing AA batteries.
!