Yealink SIP-T58V User manual

Wall Mount Quick Installation Guide
for SIP-T29_T27_T4X_T5X IP Phones
This quick installation guide provides step-by-step
instructions for mounting your IP phone to a wall.
The wall mount bracket is required for wall mount
installation, which is not included with your IP phone,
contact your reseller to purchase it separately.
Wall mount is avaliable for the following IP phones:
The following items are included in your package. If
you find anything missing, contact your system
administrator. (Purchase the proper package according
to the IP phone model you own.)
SIP-T56A IP Phone
www.yealink.com Wall Mount Quick Installation Guide
Quick Installation Guide
Avaliable for a SIP-T58V/T58A/T56A IP phone:
Wall Mount Bracket
Packaging Contents
SIP-T58V/T58A IP Phone
Quick Installation Guide
Quick Installation Guide
Avaliable for a SIP-T46S/T46G IP phone:
Wall Mount Bracket
Avaliable for a SIP-T48S/T48G IP phone:
Wall Mount Bracket
SIP-T48S/T48G IP Phone
SIP-T46S/T46G IP Phone
SIP-T29G IP Phone
SIP-T27P/T27G IP Phone

Wall anchors and appliable tools not included in your
package are also required for wall mount installation.
Wall Mount Quick Installation Guide
www.yealink.com
The hookswitch tab has a lip which allows the handset
to stay on-hook when the IP phone is mounted vertically.
Adjust the hookswitch tab as shown below(Take a
SIP-T46G IP phone as an example):
To attach the wall mount bracket:
1.Pull silica gels out of the two wall mount slots. (Only
for the SIP-T48S/T48G IP Phone)
1. Pull the hookswitch tab in the handset cradle.
2. Rotate the hookswitch tab 180 degrees.
3. Reinsert the hookswitch tab.
To adjust the hookswitch tab:
The IP phone is packaged with the hookswitch tab in desk
mount position. Before mounting the IP phone toa wall, you
must set the hookswitch tab to wall mount position.
Adjusting the Hookswitch Tab
Attaching the Wall Mount Bracket
WALL WALL
Avaliable for a SIP-T29G/T27P/T27G IP phone:
Quick Installation GuideWall Mount Bracket

2. Insert the tabs on the wall mount bracket into the
slots on the back of IP phone. And then slide the wall
mount bracket to right.
For a SIP-T48S/T48G/T29G/T27P/T27G IP phone:
PUSH
For SIP-T46S/T46G IP phones:
Yealink provides the wall mount drilling template for
each IP phone model, which locates and marks the
position for mounting the screws (not provided) on the
wall, as shown below:
Mounting the Wall Mount Bracket
For a SIP-T58V/T58A/T56A IP phone:
PUSH
ＰＣ Ｉｎｔｅｒｎｅｔ
ＤＣ５Ｖ
ＰＣ Ｉｎｔｅｒｎｅｔ
ＤＣ５Ｖ
For a SIP-T58V/T58A/T56A IP phone:
www.yealink.com Wall Mount Quick Installation Guide
For a SIP-T48S/T48G IP phone:
118.00mm
118.00mm
Screw position
Max:8mm
(0.315”)
Min:6.5mm
(0.256”)
x 4
Max:4.5mm
(0.177”)
Max:8mm
(0.315”)
Min:6.5mm
(0.256”)
Screw position
x 3
147.90mm
81.76mm
70.11mm

www.yealink.com Copyright 2017 YEALINK(XIAMEN) NETWORK TECHNOLOGY CO.,LTD.
c
Following the drilling template above, you can mount
the IP phone to the wall, as shown below
(Take a SIP-T46G IP phone as an example):
You can also download the wall mount drilling template
online: http://www.yealink.com/Support.aspx.
For SIP-T29G/T27P/T27G IP phones:
73mm
65mm
130mm
Screw position
Max:4.5mm
(0.177”)
Max:8mm
(0.315”)
Min:6.5mm
(0.256”)
x 3
For a SIP-T46S/T46G IP phone:
126.6mm
86.9mm x 4
Screw position
Max:8mm
(0.315”)
Min:6.5mm
(0.256”)
Max:4.5mm
(0.177”)