ZKTeco TS1000 Pro Series User manual

1
Installation Guide
Applicable Models: TS 1000/2000 Pro series tripod turnstile
Version: 2.0 Date: March. 2020

1
Chapter 1 Installation
1.1 Installation conditions
As shown in Figure 1-1.
Figure 1-1
1.2 Cabling
1.3 Drilling holes
1.4 Fix the device

2
Chapter 2 Installation Notes
Figure 2-1
Figure 2-2
Note: If the arm can not be lift, please push the arm to close to cabinet direction first,
then lift the arm manually.

3
Passing
indicator
Right
indicator
Left
indicator
Counter 1
Counter 2
Chapter 3 Control Board Introduction
Turnstile control board’s diagram as shown in Figure3-1
Drop arm
Opening
signal input
DC12V output (12V 3A)
Proximity switch
DC24V input
Right solenoid
Left solenoid
Drop arm
solenoid

4

5
Chapter 4 Maintenance

6
Chapter 5 Troubleshooting