zortrax Inventure User manual

Platform Cable Replacement
SOURCE:
https://support.zortrax.com/inventure-platform-cable-replacement/

Table Of Content
Opening the Front Door 3
Moving up the Platform 4
Unplugging the Power Cable 5
Unplugging the Platform Cable, part 1 6
Unplugging the Platform Cable, part 2 7
Plugging in the Platform Cable, part 1 8
Plugging in the Platform Cable, part 2 9
Plugging in the Power Cable 10

Opening the Front Door
Open the front door.

Moving up the Platform
From the menu choose Maintenance and then Move the platform. Move up the platform
using the upper button.
DO NOT MOVE THE PLATFORM TOO HIGH. THE NOZZLES CANNOT HIT THE
BUILD TRAY.

Unplugging the Power Cable
Turn off the printer and unplug the power cable.

Unplugging the Platform Cable, part 1
Unplug the platform cable from the platform.

Unplugging the Platform Cable, part 2
Unplug the platform cable from the bottom plate and remove the cable from the printer.

Plugging in the Platform Cable, part 1
Prepare a new platform cable and plug it into the platform.

Plugging in the Platform Cable, part 2
Plug in the other connector of the platform cable to the bottom plate.

Plugging in the Power Cable
Plug in the power cable and turn on the printer.
Powered by TCPDF (www.tcpdf.org)