3M 8514 P2 Operating manual

PRODUCT INFORMATION SHEET
3M™DisposableRespirator
8514, P2
How to contact us
3M Australia Pty Ltd
Phone 136 136
________________________________
3M Australia Pty Ltd Customer Service
Phone [phone]
Fax [phone]
________________________________
3M Tech Assist Hotline
Phone [phone]
________________________________
World Wide Web
www.3m.com/au/ohs
________________________________
The 3M™ Disposable Respirator 8514 P2 provides lightweight,
comfortable respiratory protection against dusts, mists, welding
fumes and smokes.
An excellent choice for welding or fume
type work settings involving heat, humidity
and long periods of wear.
Features
 P2 rated filter to AS/NZS1716.
 Cake-resistant filter media reduces
caking of particles on filter surface.
 Buckle adjustable straps help provide a
secure comfortable fit.
 Carbon layer to remove nuisance
odours and ozone for greater comfort
and protection.
 The cupped shape, twin strap design
and adjustable aluminium nose clip
provides a custom fit with fewer pres-
sure points and a secure face seal over
a range of face sizes.
 Patented one-way valve offers easy
exhalation and cooler, drier comfort.
 For use against both mechanically gen-
erated particulates and thermally gen-
erated fumes and smokes .
Time Use Limitation:
 If the respirator becomes damaged,
soiled, or breathing becomes difficult,
leave the contaminated area and re-
place and refit the respirator.
Specifications
 Weight: ~35g per respirator.
 Meets performance requirements of AS/
NZS1716.
Applications
 Welding
 Bushfire fighting
 Furnace work
Materials:
The following materials are used in this
product:
 Nose-clip - Aluminium alloy 3003
Component Weight (%)
Al 96.7 - 99
Cu 0.05 - 0.2
Fe Max 0.7
Mn 1 - 1.5
Other, each Max 0.05
Other, total Max 0.15
Si Max 0.6
Zn Max 0.1
 Straps - Heavy duty Elastic
 Filter - Polypropylene & carbon
 Valve - Polypropylene & Polyisoprene
Latex & Fibreglass Free
©Copyright 3M Australia Pty. Limited 2007
Neitherwholeor part ofthispublication may be reproduced without prior permission
February2007
Packaging Product Code 3M Order code
10 Respirators/box, 8 boxes/case 8514 0398651
Ordering Information

3M™DisposableRespirator
8514, P2
©Copyright 3M Australia Pty. Limited 2007
Neitherwholeor part ofthispublication may be reproduced without prior permission
February2007
PRODUCT INFORMATION SHEET
WARNING!
 Respirators must not be used until your
employer has determined whether us-
age will be in accordance with manu-
facturers instructions.
 The wearer must be trained in the
proper fitting and use of this product.
 Failure to follow all instructions and
warnings on the use of this product
and/or failure to wear this respirator
during all times of exposure can reduce
respirator effectiveness and result in
illness or death.
 All respirators should be used in accor-
dance with Australian Standard AS/
NZS 1715.
 It is recommended that fit testing be con-
ducted before assigning a respirator to
an individual. If you cannot achieve a
proper fit, do not enter contaminated
areas.
 Do not use with beards orother facial
hair or conditions that prevent a good
seal between the face and the sealing
surface of the respirator.
How to contact us
3M Australia Pty Ltd
Phone 136 136
________________________________
3M Australia Pty Ltd Customer Service
Phone [phone]
Fax [phone]
________________________________
3M Tech Assist Hotline
Phone [phone]
________________________________
World Wide Web
www.3m.com/au/ohs
________________________________