Advantech MIO-5270 Installation and operation manual

MIO-5270 Startup Manual 1
Before you begin installing your board, please make sure
that the following items have been shipped:
• 1 x MIO-5270 SBC
• 1 x SATA Cable 30cm (P/N 1700006291)
• 1 x SATA Power Cable 35cm (P/N 1700018785)
• 1 x Audio Cable 20cm (P/N 1700019584)
• 2 x COM Cable 22cm (P/N 1701200220)
• 1 x COM RS-422/485 Cable 25cm (P/N 1700019435)
• 1 x Heatsink (25mm) for T40E/T40R
(P/N: 1960053507N001)
• 1 x Cooler (25mm) for T56N (P/N 1960053508N001)
• Startup Manual
• CD-ROM (Manual, Driver, Utility)
• 1 x Mini Jumper(10pcs package) (P/N 9689000002)
If any of these items are missing or damaged, please con-
tact your distributor or sales representative immediately.
Note1: For detailed contents of MIO-5270, please refer
to information on the enclosed CD-ROM (in PDF
format).
Note1: Acrobat Reader is required to view any PDF file.
Acrobat Reader can be downloaded at: www.
adobe.com/Products/acrobat/readstep2.html
(Acrobat is a trademark of Adobe)
MIO-5270 MI/O Extension SBC, AMD® G- Series, DDR3, HDMI, 48-bit
LVDS, VGA, 2 GbE, CFast, iManager, MIOe
Startup Manual
General
• CPU: AMD G-Series
T56N (Dual Core 1.65GHz): MIO-5270D-S6A1E
T40E (Dual Core 1.0GHz): MIO-5270D-S0A1E
T40R (Single Core 1.0GHz): MIO-5270S-S0A1E
• System Memory: 1 x 204-pin SODIMM socket DDR3 up to 4GB
T56N: DDR3 1333 MHz
T40E/T40R: DDR3 1066 MHz
• 2nd Cache Memory:
T56N: 1MB
T40E/T40R: 512KB
• System Chipsets: AMD G-series + A50M FCH
• BIOS: AMI EFI 32-Mbit
• Watchdog Timer: 255 levels timer interval, program-
mable by software. Multi level WDT (set by iManager)
• Expansion Interface: PCIe Mini Card, CFast, MIOe
• Battery: Lithium 3 V / 210 mAH
• Audio: Support High Definition Audio (HD), line-in, line-
out, Mic-in
Display
• Controller: AMD G-series T56N/T40E/T40R
• Resolution:
-- VGA:
T56N: 2560 x 1600
T40E/T40R: 1920 x 1200
-- LVDS:
LVDS suppots single channel 24-bit/dual channels 48-bit
T56N: 2560 x 1600 @60Hz
T40E/T40R: 1920 x 1200 @60Hz
(Pixel clock rate 80MHz)
-- HDMI:
Supports 1920 x 1080p @60Hz, 36bpp
Supports HDMI 1.3, using TMDS data encoding
• Dual Independent Display:
VGA+LVDS, VGA+HDMI, HDMI+LVDS
Ethernet Interface
• Speed: GbE 10/100/1000 Mbps
• Chipset: Realtek RTL8111E- VB-GR (GbE1, GbE2)
• Ethernet Interface: Fully compliant with IEEE 802.3,
IEEE 802.3u, IEEE 802.3ab
• Connector: RJ45 x2
I/O
• Internal I/O Interface: 2 x SATAII, 3 x RS-232, 1 x
RS232/422/485, 2 x USB 2.0, GPIO, SMBus
• Rear I/O: 4 x USB 2.0, HDMI, VGA, 2 x RJ45 Ethernet,
DC Power in connector
• DC Power in connector:
T56N: 2 x 2 pin power connector
T40E/T40R: DC Jack
• GPIO: 8-bit general purpose input/output
Specications Packing List
For more information on this and other Advantech
products, please visit our website at:
http://www.advantech.com
http://www.advantech.com/eplatform
For technical support and service, please visit our
support website at:
http://service.advantech.com.tw/support/
This manual is for the MIO-5270.
Part No. 2006527000
Printed in China
1st Edition
September 2011
All manuals and user guides at all-guides.com
all-guides.com

2 MIO-5270 Startup Manual
Mechanical and Environmental
• Dimensions (L x W): 146 x 102 mm (5.7 x 4 inches)
• Power Supply Type: APM 1.2, ACPI support
• Power Requirement: +12 V ± 10%
• Power Consumption: with 4GB DDR3 1066 SO-DIMM
Max in HCT12:
T56N: +12V @ 1.35A
T40E: +12V @ 0.82A
T40R: +12V @ 0.8A
Typical: Idle mode in WindowsXP
T56N: +12V @ 0.65A
T40E: +12V @ 0.53A
T40R: +12V @ 0.59A
• Operating Temperature: 0~60°C (32~140°F)
• Weight: 0.85 kg (reference weight of total package)
Jumpers and Connectors
The board has a number of connectors and jumpers that
allow you to configure your system to suit your application.
The table below lists the function of each of the jumpers and
connectors.
Jumpers
Label Function
J1 Clear CMOS
J2 Auto Power on setting
J3 LCD power
J5 COM2 setting
Connector
Lable Function
CN1 Power Switch
CN2 Inverter Power Output
CN3 Reset
CN4 SATA Power
CN5 S ATA 1
CN6 S ATA 2
CN7 RS422/485
CN8 GPIO
CN10 DDR3 SODIMM Socket
CN12 Internal USB
CN13 SMBus
CN14 RJ-45 Ethernet x 2
CN17 48 bits LVDS Panel
CN18 External USB (1/2)
CN19 External USB (3/4)
CN20 HDMI
CN22 12V Power Input
CN23 VGA
CN24 Audio
CN25 COM1/COM2
CN26 COM3/COM4
CN28 MIOe
CN29 PCIe Mini Card Holder
CN30 PCIe Mini Card
CN31 CFast
FAN1 CPU FAN
J1: Clear CMOS
Part Number 1653003101
Description
PIN HEADER 3x1P 2.0mm 180D(M) DIP
2000-13 WS
Setting Function
(1-2)* Normal
(2-3) Clear CMOS
J2: Auto Power On Setting
Part Number 1653002101
Description
PIN HEADER 2*1P 180D(M)SQUARE
2.0mm DIP W/O Pb
Setting Function
NC Power Button for Power On
(1-2)* Auto Power On
Specications
Jumpers and Connectors
All manuals and user guides at all-guides.com

MIO-5270 Startup Manual 3
Connector Location
Figure 1: MIO-5270 Jumpers and Connectors (Top side)
J3: LCD Power
Part Number 1653003201
Description
PIN HEADER 3*2P 180D(M) 2.0mm DIP
SQUARE WO/Pb
Setting Function
(1-3)*
+3.3 V
(3-5)
+5 V
(3-4) +12 V
J5: COM2 Setting
Part Number 1653003260
Description
PIN HEADER 3x2P 2.0mm 180D(M)
SMD 21N22050
Setting Function
(1-2)* RS232
(3-4) RS485
(5-6) RS422
ESBC Jensen. Li
CN5 CN6
CN7
CN4
CN2
CN3
CN1
FAN1
CN22
CN14
CN23
CN13
CN17CN20CN19CN18 Power LED
CN12
J1
J2
J3
CN10
Jumpers and Connectors
All manuals and user guides at all-guides.com

4 MIO-5270 Startup Manual
Connector Location
Figure 2: MIO-5270 Location Connectors (Bottom Side)
Figure 3: MIO-5270 Mechanical Drawing (Side View)
CN31
CN28
CN24 CN8 CN25 CN26
CN29
J5
7,75
5,87
9,28
4,20
6,70
9,99
5,14
6,00
7,90
8,30
26,30
45,58
76,09
111,92
130,81
139,50
18,54
39,62
75,69
112,82
I/O Connectors
All manuals and user guides at all-guides.com

MIO-5270 Startup Manual 5
Board Diagram
Figure 4: MIO-5270 Mechanical Drawing (Top Side)
Figure 5: MIO-5270 Location Connectors (Bottom Side)
101.86
98.70
96.54
96.32
86.76
62.65
57.15
20.50
0.00
12.02
20.44
20.89
81.75
27.20
98.43
97.92
99.06
92.70
0.00
77.98
13.61
15.34
21.35
3.65
6.35
6.60
94.87
22.80
4.80
3.30
10.97 44.26
50.00 58.77 42.42
124.65
136.67
80.78
92.02
142.75 146.00
46.70
110.68
129.54
124.71
120.59
106.49
55.25
71.88
142.70
80.50
142.59 138.06 135.62
0.00
3.30
65.50 48.60
27.20
44.65
73.84
50.30
86.17
92.70
102.00
98.79
2.62
3.30
57.54
74.31
98.70
20.50
98.16
136.46
115.38
142.70
144.57
0.00
All manuals and user guides at all-guides.com

6 MIO-5270 Startup Manual
Quick Installation Guide
1. There is a Heatsink / Cooler in the white box, please take it and remove the release paper from the thermal pad.
2. There are four screws inside the white box, please install DRAM in the SO-DIMM socket, then screw the heatsink as below
chart.
Removing the
release paper
All manuals and user guides at all-guides.com
all-guides.com