AGCO Gleaner 3200 Series User manual

Workshop Service Manual
3200 Series Corn Header
3206
3206C
3212F
3212FC
North America
4205 River Green Parkway, Duluth GA 30096 USA
© AGCO 2017
May 2017
79037206A
NA
English
Gleaner®

CALIFORNIA
Proposition 65 Warning
WARNING: Diesel engine exhaust and some of its constituents are known to the State of
California to cause cancer, birth defects, or other reproductive harm.
WARNING: Battery posts, terminals and related accessories contain lead and lead compounds,
chemicals known to the State of California to cause cancer, birth defects, or other reproductive
harm. Wash hands after handling.
Find manuals at https://best-manuals.com

3200 Series Corn Header
1 General ..................................................................1-1
1.1 General information ................................................1-3
1.1.1 Introduction to this service manual ....................................1-3
1.1.2 Units of measurement .............................................1-3
1.1.3 Table of contents ................................................1-3
1.1.4 Page numbers .................................................. 1-3
1.1.5 Intended use ................................................... 1-3
1.1.6 Proper disposal of waste ...........................................1-3
1.2 Safety .............................................................1-5
1.2.1 Safety symbol ...................................................1-5
1.2.2 Safety messages ................................................ 1-5
1.2.3 Information messages .............................................1-5
1.2.4 Safety signs ....................................................1-5
1.2.5 A word to the technician ...........................................1-6
1.2.6 The service manual ...............................................1-7
1.2.7 Travel on public roads .............................................1-7
1.3 Operation .........................................................1-9
1.3.1 Prepare for operation ..............................................1-9
1.3.2 General information ...............................................1-9
1.3.3 Personal protective equipment ......................................1-10
1.3.4 Seat instructions ................................................1-11
1.3.5 Shield and guards ...............................................1-11
1.3.6 Exhaust warning ................................................1-12
1.3.7 Flying debris ...................................................1-12
1.3.8 Handrails .....................................................1-12
1.3.9 Agricultural chemicals ............................................1-12
1.4 Cylinder stops ....................................................1-14
1.4.1 Engaging the header lift cylinder stop .................................1-14
1.4.2 Disengaging the header lift cylinder stop ..............................1-14
1.5 Maintenance ......................................................1-15
1.5.1 General maintenance information ....................................1-15
1.5.2 Fire prevention and first aid ........................................1-16
1.5.3 High pressure leaks ..............................................1-17
1.5.4 Tire safety .....................................................1-18
1.5.5 Replacement parts ..............................................1-18
1.6 Specifications .....................................................1-19
1.6.1 Dimensions and weights ..........................................1-19
1.6.2 Lubrications specifications .........................................1-19
1.7 Lubrication details ................................................1-20
1.7.1 Service schedule ................................................1-20
1.7.2 During lubrication ...............................................1-20
1.7.3 Sealed bearings .................................................1-20
1.7.4 Lubrication fittings ...............................................1-21
1.8 Troubleshooting ..................................................1-23
1.8.1 Header troubleshooting ...........................................1-24
1.9 Bolt torque values ................................................1-25
1.10 Conversion table .................................................1-27
1.11 Machine identification ............................................1-30
1.11.1 Serial number plate .............................................1-30
1.11.2 Serial number description ........................................1-30
Table of contents
3200 Series Corn Header
79037206A
Find manuals at https://best-manuals.com

2 Augers ...................................................................2-1
2.1 Auger .............................................................2-3
2.1.1 Remove the auger safety clutch ......................................2-3
2.1.2 Install the auger safety clutch ....................................... 2-4
2.1.3 Remove the auger bearing ..........................................2-4
2.1.4 Install the auger bearing ...........................................2-6
3 Electrical system ......................................................... 3-1
3.1 Basic troubleshooting procedures .......................................... 0
3.1.1 Tools ........................................................ 0
3.1.2 Continuity check ................................................ 0
3.1.3 Voltage check .................................................. 0
3.2 Connectors ........................................................3-3
3.2.1 Check a connector ...............................................3-3
3.2.2 Terminal numbers ................................................3-3
3.2.3 Pins and sockets .................................................3-4
3.2.3.1 Dielectric grease ..........................................3-5
4 Row units ................................................................4-1
4.1 Gathering chain ....................................................4-3
4.1.1 Remove the gathering chain ........................................4-3
4.1.2 Install the gathering chain ..........................................4-3
4.1.3 Remove the gathering chain tensioner .................................4-3
4.1.4 Install the gathering chain tensioner ...................................4-4
4.2 Snapping roll ......................................................4-5
4.2.1 Remove the snapping roll ..........................................4-5
4.2.2 Install the snapping roll ............................................4-5
4.3 Stalk chopper ......................................................4-6
4.3.1 Remove the stalk chopper ..........................................4-6
4.3.2 Install the stalk chopper ............................................4-7
4.3.3 Remove the first bearing for the stalk chopper ...........................4-9
4.3.4 Install the first bearing for the stalk chopper ............................4-11
4.3.5 Remove the second bearing for the stalk chopper ........................4-13
4.3.6 Install the second bearing for the stalk chopper ..........................4-14
4.3.7 Remove the third bearing for the stalk chopper ..........................4-15
4.3.8 Install the third bearing for the stalk chopper ............................4-18
4.4 Snapping unit ....................................................4-20
4.4.1 Remove the snapping unit gearbox ..................................4-20
4.4.2 Install the snapping unit gearbox ....................................4-21
4.4.3 Remove the input gearbox for the snapping unit .........................4-23
4.4.4 Install the input gearbox for the snapping unit ...........................4-23
4.4.5 Disassemble the gearbox for the snapping unit ..........................4-24
4.4.6 Assemble the gearbox for the snapping unit ............................4-29
4.4.7 Disassemble the input gearbox for the snapping unit ......................4-34
4.4.8 Assemble the input gearbox for the snapping unit ........................4-37
4.4.9 Remove the primary input gearbox ...................................4-39
4.4.10 Install the primary input gearbox ....................................4-40
4.4.11 Remove the hex shaft ...........................................4-40
4.4.12 Install the hex shaft .............................................4-41
4.4.13 Remove the main output gearbox ...................................4-42
4.4.14 Install the main output gearbox ....................................4-43
4.4.15 Disassemble the gearbox for the primary input and output .................4-44
4.4.16 Assemble the gearbox for the primary input and output ...................4-47
4.4.17 Remove the hollow shaft for the input gearbox .........................4-49
4.4.18 Install the hollow shaft for the input gearbox ...........................4-50
4.4.19 Remove the snapping unit ........................................4-51
Table of contents
3200 Series Corn Header
79037206A
Find manuals at https://best-manuals.com

4.4.20 Install the snapping unit ..........................................4-53
4.5 Snout ............................................................4-55
4.5.1 Remove the plastic divider .........................................4-55
4.5.2 Install the plastic divider ...........................................4-56
4.6 Automatic header height control ...................................4-57
4.6.1 Remove the automatic header height control (AHHC) assembly ..............4-57
4.6.2 Install the automatic header height control (AHHC) assembly ................4-57
4.6.3 Remove the electronic sensor ......................................4-58
4.6.4 Install the electronic sensor ........................................4-58
4.6.5 Remove the gas strut ............................................4-58
4.6.6 Install the gas strut ..............................................4-59
4.6.7 Remove the globe joint and rod .....................................4-59
4.6.8 Install the globe joint and rod .......................................4-59
4.6.9 Calibrate the automatic header height control (AHHC) .....................4-61
5 Special tools .............................................................5-1
5.1 Special tools .......................................................5-3
6 Diagrams ................................................................ 6-1
6.1 Electrical schematic ................................................6-3
6.2 Hydraulic schematics ...............................................6-4
6.2.1 Hydraulic folding schematic .........................................6-4
6.2.2 Hydraulic unfolding schdematic ......................................6-6
7 Index .................................................................Index-1
Table of contents
3200 Series Corn Header
79037206A
Find manuals at https://best-manuals.com

Table of contents
3200 Series Corn Header
79037206A
Find manuals at https://best-manuals.com

1. General
1.1 General information .....................................................1-3
1.1.1 Introduction to this service manual .........................................1-3
1.1.2 Units of measurement ..................................................1-3
1.1.3 Table of contents .....................................................1-3
1.1.4 Page numbers .......................................................1-3
1.1.5 Intended use ........................................................1-3
1.1.6 Proper disposal of waste ................................................1-3
1.2 Safety ..................................................................1-5
1.2.1 Safety symbol ........................................................1-5
1.2.2 Safety messages .....................................................1-5
1.2.3 Information messages ..................................................1-5
1.2.4 Safety signs .........................................................1-5
1.2.5 A word to the technician ................................................1-6
1.2.6 The service manual ....................................................1-7
1.2.7 Travel on public roads ..................................................1-7
1.3 Operation ..............................................................1-9
1.3.1 Prepare for operation ...................................................1-9
1.3.2 General information ....................................................1-9
1.3.3 Personal protective equipment ...........................................1-10
1.3.4 Seat instructions .....................................................1-11
1.3.5 Shield and guards ....................................................1-11
1.3.6 Exhaust warning .....................................................1-12
1.3.7 Flying debris ........................................................1-12
1.3.8 Handrails .......................................................... 1-12
1.3.9 Agricultural chemicals .................................................1-12
1.4 Cylinder stops .........................................................1-14
1.4.1 Engaging the header lift cylinder stop ......................................1-14
1.4.2 Disengaging the header lift cylinder stop ................................... 1-14
1.5 Maintenance ...........................................................1-15
1.5.1 General maintenance information .........................................1-15
1.5.2 Fire prevention and first aid .............................................1-16
1.5.3 High pressure leaks ...................................................1-17
1.5.4 Tire safety ..........................................................1-18
1.5.5 Replacement parts ...................................................1-18
1.6 Specifications ..........................................................1-19
1.6.1 Dimensions and weights ...............................................1-19
1.6.2 Lubrications specifications ..............................................1-19
1.7 Lubrication details .....................................................1-20
1.7.1 Service schedule .....................................................1-20
1.7.2 During lubrication ....................................................1-20
1.7.3 Sealed bearings ......................................................1-20
1.7.4 Lubrication fittings ....................................................1-21
1.8 Troubleshooting .......................................................1-23
1.8.1 Header troubleshooting ................................................1-24
1.9 Bolt torque values ..................................................... 1-25
1.10 Conversion table ......................................................1-27
1.11 Machine identification .................................................1-30
1.11.1 Serial number plate ..................................................1-30
1.11.2 Serial number description ............................................. 1-30
Table of contents
3200 Series Corn Header 1-1
79037206A
Find manuals at https://best-manuals.com

Table of contents
1-2 3200 Series Corn Header
79037206A
Find manuals at https://best-manuals.com

1.1 General information
1.1.1 Introduction to this service manual
This service manual gives information from engineering tests, operating data, and the latest service
techniques at the time of publication. Read this service manual carefully before doing any service on the
machine.
The photos and illustrations used in this service manual were current at the time of publication. Production
changes can cause machines to vary from the photos and the illustrations. The manufacturer reserves the
right to redesign and change machines as necessary without notification.
WARNING:
Some pictures in this manual show the machine with shields or guards removed to
permit for a better view of the subject of the picture. All shields and guards must be in
position before operating the machine.
Machine movement when in normal use determines right-hand and left-hand.
1.1.2 Units of measurement
Measurements are given in metric units followed by the equivalent in US units. Hardware sizes are given
in millimeters for metric hardware and inches for US hardware.
1.1.3 Table of contents
This manual has a table of contents at the front. The table of contents shows the divisions. The individual
divisions also have a table of contents.
1.1.4 Page numbers
All pages have two numbers, such as 01-25. The first number shows the division. The second number
shows the page in the division.
Page numbers occur on the lower right-hand or lower left-hand corner of each page.
1.1.5 Intended use
This machine is designed solely for use in customary agricultural operations.
Do not use this machine for any application or purpose other than those described in this manual. The
manufacturer accepts no liability for damage or injury resulting from misuse of this machine.
Compliance with the conditions of operation, service and repair as specified by the manufacturer constitute
essential elements for the intended use of this machine.
This machine should be operated, serviced and repaired only by qualified persons familiar with its
characteristics and familiar with the relevant safety rules and procedures.
All generally recognized safety regulations and road traffic regulations must be obeyed at all times.
Any unauthorized modifications performed on this machine will relieve the manufacturer of all liability for
any resulting damage or injury.
1.1.6 Proper disposal of waste
Improper disposal of waste can pollute the environment and ecology. A few examples of potentially
harmful equipment waste can include, but not limited to, items such as oil, fuel, coolant, brake fluid, filters,
battery chemicals, tires, etc.
Use leak proof containers when draining fluids. Do not use food or beverage containers to collect waste
fluids, as food or beverage container(s) may mislead someone into drinking from them.
[V]
GUID-D0FA2E94-0D28-42E9-A80B-6BB593BA9687 [V1]
GUID-EBB3FCAE-8712-43A9-BB65-1DB48189C57C [V2]
GUID-9BD2A110-651C-40FC-8D40-EDBAFD670A3C [V1]
GUID-6300C4A8-D25F-4B2F-BDC2-FAC58F99378B [V1]
GUID-939752D3-F912-4AFA-9CE0-FF5251AFAD3D [V3]
GUID-D27C9EFF-D3E3-4F5E-93ED-A6E5560C23DF [V3]
1. General
3200 Series Corn Header 1-3
79037206A
Find manuals at https://best-manuals.com

Do not pour or spill waste onto the ground, down a drain, or into any water source.
Air conditioning refrigerants escaping into the air can damage the Earth's atmosphere. Government
regulations may require a certified air conditioning service center to recover and recycle used air
conditioning refrigerants.
Inquire with local environmental or recycling center on the proper way to recycle or dispose waste.
1. General
1-4 3200 Series Corn Header
79037206A
Find manuals at https://best-manuals.com

1.2 Safety
1.2.1 Safety symbol
The safety symbol tells you about a dangerous
area!
Look for the safety symbol in this manual and on
the machine. The safety symbols tell you that
there is important safety instructions in the
manual.
GUID-4C201302-DBD2-4BFB-8D98-1DDED263BD6E-high.jpg [High]
Fig. 1
1.2.2 Safety messages
The words DANGER, WARNING or CAUTION are
used with the safety symbol. Learn these safety
messages and obey the recommended
precautions and safety instructions.
DANGER:
If you do not obey the recommended
precautions and safety instructions,
DEATH OR INJURY will occur.
WARNING:
If you do not obey the recommended
precautions and safety instructions,
DEATH OR INJURY can occur.
CAUTION:
If you do not obey the recommended
precautions and safety instructions,
INJURY can possibly occur.
GUID-73F05026-C37B-415A-8140-AD939A283378-high.jpg [High]
Fig. 2
1.2.3 Information messages
The words important and note are not related to personal safety, and are used to give information about
the operation and servicing of the machine.
IMPORTANT: Identifies special instructions or procedures which, if not followed, can cause damage to the
machine, the process, or the area around the machine.
NOTE: Information to make procedures easier.
1.2.4 Safety signs
WARNING:
Do not remove the safety signs. Replace safety signs that can not be read, are damaged, or are missing.
Clean the machine surface with a weak soap and water solution before replacing the safety signs.
Replacement safety signs are available from your dealer.
[V]
GUID-5D9F270E-D748-4741-82B1-BE49B78685F2 [V4]
GUID-E54F7740-C021-42A8-8784-4287BE4356C8 [V4]
GUID-9A909F52-D57E-4C30-8CC7-6FDB6D7E9982 [V3]
GUID-2FB17168-6A01-47C5-B298-234AF171520B [V4]
1. General
3200 Series Corn Header 1-5
79037206A

Always make sure safety signs are in the correct locations and can be read. Illustrations of safety sign
locations are at in this section.
Keep the safety signs clean. If it is necessary, use a weak soap and water solution.
1.2.5 A word to the technician
Read and understand the safety section in this
service manual before operating or servicing the
machine. Read and understand the safety sections
in the manuals for all attachments before
operating or servicing attachments. The technician
has the key to safety. Good safety practices
protect everyone.
Study the safety information in this service
manual. Make the safety information a working
part of the safety program. The safety information
in this service manual applies specifically to this
type of machine. Always do all other usual and
customary safe working precautions. Remember -
The technician has the responsibility for safety.
Good safety practices can prevent serious injury or
death.
The safety section points out some basic safety
situations that can occur during the operation and
maintenance of the machine. The safety section
also suggests possible ways to deal with these
situations. The safety section does not replace
safety practices in other parts of this service
manual.
Practice good safety to help prevent injury or
death.
Learn how to operate the machine and how to use
the controls correctly.
Do not let other persons operate the machine
without instruction and training.
Follow all safety precautions and instructions in
the manuals and on safety signs affixed to the
machine and all attachments.
Use only approved attachments and equipment.
Make sure the machine has the correct equipment
needed by the local regulations.
WARNING:
An operator should not use alcohol or
drugs which can affect their alertness
or coordination. An operator on
prescription or 'over the counter'
drugs needs medical advice on
whether or not they can properly
operate machines. If any attachments
used on this equipment have a
separate Operator Manual, see that
manual for other important safety
information.
GUID-AC91CCF6-1FF8-4A85-97A1-2D1562806825-high.jpg [High]
Fig. 3
GUID-3C35D58D-1F5D-4B85-A915-C7BB48F47262 [V1]
1. General
1-6 3200 Series Corn Header
79037206A

1.2.6 The service manual
Read the table of contents and basic layout. Become familiar with all parts of this service manual. This
service manual gives the technician very important information.
Machine movement when in normal use determines right-hand and left-hand.
This manual covers general safety practices for this machine.
The photos, illustrations, and data used in this manual were current at the time of printing. Inline
production changes can make machines vary from the information in the service manual. The manufacturer
reserves the right to redesign and change the machine as necessary without notification.
WARNING:
In some of the illustrations and photos used in this manual, shields or guards may have
been removed for clarity. Never operate the machine with any shields or guards removed.
If the removal of shields or guards is necessary to make a repair, they must be replaced
before operation.
1.2.7 Travel on public roads
Make sure you understand the speed, brakes,
steering, stability, and load characteristics of this
machine before you travel on public roads.
Use good judgment when traveling on public
roads. Maintain complete control of the machine
at all times. Never coast down hills.
The maximum speed of farm equipment is
governed by local regulations. Adjust travel speed
to maintain control at all times.
Familiarize yourself with and obey all road
regulations that apply to your machine. Consult
your local law enforcement agency for local
regulations regarding movement of farm
equipment on public roads. Use head lamps,
flashing warning lamps, tail lamps and turn signals,
day and night, unless prohibited by local law.
Make sure all the flashers are operating prior to
driving on the road. Make sure reflectors are
correctly installed, in good condition, and wiped
clean. Make sure the Slow Moving Vehicle (SMV)
emblem is clean, visible, and correctly mounted on
the rear of the machine.
Always travel with the loader as low as possible.
Do not drive with loader up.
Lock brake pedals together (if equipped with dual
brake pedals) so both wheel brakes will be applied
at the same time.
Raise implements to transport position and lock in
place. Place all implements into narrowest
transport configuration.
Disengage the power take-off and differential lock.
With towed implements, use a proper hitch pin
with a clip retainer and safety transport chain.
GUID-657D3002-48DB-436B-9B56-D3750095397D-high.jpg [High]
Fig. 4
GUID-0CC50E5C-AD62-4FFD-9435-62214FEFA5F4 [V1]
GUID-9F5833EA-33BD-4C88-AA79-9433C36B3EF6 [V2]
1. General
3200 Series Corn Header 1-7
79037206A

Be aware of other traffic on the road. Keep well
over to your own side of the road and pull over,
whenever possible, to let faster traffic pass.
Be aware of the overall width, length, height, and
weight of the machine. Be careful when
transporting the machine on narrow roads and
across narrow bridges.
Watch for overhead wires and other obstructions.
Avoid contact with electrical power lines. Contact
with electrical power lines can cause electrical
shock, resulting in very serious injury or death.
GUID-DB0A93E4-AEB5-49D5-AC5F-DD1454F1CFC6-high.jpg [High]
Fig. 5
1. General
1-8 3200 Series Corn Header
79037206A

1.3 Operation
1.3.1 Prepare for operation
Read and understand all operating instructions and precautions in this manual before operating or servicing
the machine.
Make sure you know and understand the positions and operations of all controls. Make certain all controls
are in neutral and the park brake is applied before starting the machine. Make sure the steering wheel is
centered and locked.
Make certain all people are well away from your area of work before starting and operating the machine.
Check and learn all controls in an area clear of people and obstacles before starting your work. Be aware of
the machine size and have enough space available to allow for operation. Never operate the machine at
high speeds in crowded places.
Emphasize the importance of using correct procedures when working around and operating the machine.
Do not let children or unqualified persons operate the machine. Keep others, especially children, away
from your area of work. Do not permit others to ride on the machine.
Make sure the machine is in the proper operating condition as stated in the Operator Manual. Make sure
the machine has the correct equipment required by local regulations.
All equipment has a limit. Make sure you understand the speed, brakes, steering, stability, and load
characteristics of this equipment before you start.
1.3.2 General information
When parking, park the machine on a solid level
surface and lower the header to the ground. Put all
controls in neutral, and apply the park brake. Stop
the tractor engine and take the key with you.
WARNING:
Do not leave the machine unattended
with the header raised. Lower the
header fully before leaving the
machine. A sudden loss of hydraulic
pressure can cause the header to
drop without warning.
Make sure the machine is in the proper operating
condition according to the Operator Manual.
Always operate the machine with the control
console turned on.
Do not dismount from moving machinery.
Stay off slopes too steep for operation.
Be aware of the size of the machine and have
enough space available to allow for operation.
GUID-E77631FB-0DC0-4637-9090-88018315176E-high.jpg [High]
Fig. 6
[V]
GUID-A9D74CBD-C409-4BEA-B8C1-A3DA5AE3C5EC [V3]
GUID-4A3E5877-B877-4D0E-B383-C7913925C8F9 [V1]
1. General
3200 Series Corn Header 1-9
79037206A

Stay off slopes too steep for operation. Keep the
header as low as possible while going down hills.
Never suddenly reverse the wheels to stop or
back up.
Where possible avoid operating the machine near
ditches, embankments, and holes. Reduce ground
speed when operating on rough, slippery, or
muddy surfaces and when turning or crossing
slopes.
GUID-2689EDF9-0D9E-4199-95DD-43FDAC50D8E8-high.jpg [High]
Fig. 7
Avoid contact with electrical power lines. Contact
with electrical power lines can cause electrical
shock, resulting in very serious injury or death.
GUID-DB0A93E4-AEB5-49D5-AC5F-DD1454F1CFC6-high.jpg [High]
Fig. 8
1.3.3 Personal protective equipment
Put on all personal protective equipment (PPE) and
protective clothes that are supplied to you or that
are necessary for the conditions and by applicable
laws. PPE includes equipment to prevent injury to
your eyes, lungs, ears, head, hands and feet.
Always keep hands, feet, hair, and your clothes
away from parts that move. Do not put on loose
clothing, jewelry, watches, or other items that can
tangle in parts that move. Tie up long hair that can
also tangle in moving parts.
GUID-1AEEBD1D-C71B-432C-9D23-52467D7C0BBF-high.jpg [High]
Fig. 9
GUID-7FEFA67B-E06F-4EFE-A23E-738FE96997E9 [V3]
1. General
1-10 3200 Series Corn Header
79037206A

1.3.4 Seat instructions
Put on the seat belt before you operate the
machine. Always sit in the seat and have the seat
belt on while you operate the machine. Replace
the seat belts when they become worn or broken.
Do not use a seat belt loosely. Make sure that
there is some tension on the seat belt. Do not
wear the seat belt in a twisted condition or
pinched between the structural parts of the seat.
Put on the seat belt if the instructional seat is
used. Use the instructional seat only to train new
operators or to find a problem. The instructional
seat is only for short periods of use.
Do not let children use the instructional seat or be
in the cab. Do not let other persons use the
instructional seat or be in the cab.
Drive the machine at slower speed and on level
ground when the instructional seat is used. Do not
start, stop, or turn quickly when the instructional
seat is used. Do not drive on highways or public
roads when the instructional seat is used.
GUID-5BA328EA-7732-4CE8-97B2-6511151E943C-high.jpg [High]
Fig. 10
1.3.5 Shield and guards
All shields and guards must be in the correct
position and in good condition.
Do not open, remove, or put your hand behind
shields while the engine in operation. Belts and
components that turn can cause entanglement,
which can cause injury and death. Keep away from
the components that turn.
GUID-6163F2D6-39D6-48BF-871C-AC346EE022D2-high.jpg [High]
Fig. 11
Do not operate the machine with the drive shaft
shields open or removed. Entanglement in drive
shafts that turn can cause injury or death. Keep
away from the components that turn.
Make sure guards that turn are free.
GUID-CEB32148-1F4C-457C-ADF7-595DFC51AC25-high.jpg [High]
Fig. 12
GUID-F38524AD-E24F-4FCC-9154-E5357EFDE9D2 [V3]
GUID-9398BDE6-F83A-4855-B266-E86D0B48B9D7 [V5]
1. General
3200 Series Corn Header 1-11
79037206A

1.3.6 Exhaust warning
Do not operate the engine in a closed building
unless the exhaust is vented to the outside.
Do not tamper with or modify the exhaust system
with unapproved extensions.
GUID-55072A39-D882-4355-8ABA-05660F3F6EDA-high.jpg [High]
Fig. 13
1.3.7 Flying debris
WARNING:
Be careful when you operate along
the side of a road or structures. Rocks
and other materials can be thrown
from the machine during operation
and can cause injury.
Stay away from the machine during operation.
Some materials can be thrown from the machine
during operation and cause injury.
GUID-1D480E10-339B-427D-9D05-37E84CC7A29A-high.jpg [High]
Fig. 14
1.3.8 Handrails
Point your body in the direction of the ladder and
use the handrails when you are on the machine
ladders.
GUID-B4BF5956-B0F7-43A5-85C1-706D96BCA02B-high.jpg [High]
Fig. 15
1.3.9 Agricultural chemicals
Agricultural chemicals are very dangerous. Incorrect procedures with fertilizer, fungicides, herbicides,
insecticides and pesticides can cause injuries to plants, animals, soil and other persons property.
Always read and follow all manufacturers instructions before you open chemical containers.
GUID-AC6BA923-B398-43F4-BFAE-5130AFED6FC5 [V3]
GUID-3910D764-BEA7-4A1B-80BF-946E438C6212 [V5]
GUID-DAAB4281-F045-467E-97A1-20DFD2BB692C [V3]
GUID-A494D2FA-1956-40C4-9743-052166A2A431 [V3]
1. General
1-12 3200 Series Corn Header
79037206A

Read and follow instructions each and each time you use a chemical.
Use the same precautions when you do adjustments, servicing, clean or store the machine as used when
you put chemicals into the hoppers or tanks.
Tell all person who comes go near with chemicals of the possible dangerous results and the safety
precautions that are necessary.
Stay upwind and away from smoke from a chemical fire.
Store or discard all chemicals that are not used only in the procedure specified by the chemical
manufacturer.
1. General
3200 Series Corn Header 1-13
79037206A

1.4 Cylinder stops
1.4.1 Engaging the header lift cylinder stop
Procedure
1. Park the machine on a solid, level surface.
2. Put the transmission in neutral and apply the parking brake.
3. Raise the feeder house to full height.
4. Release the hook and lower the header lift
cylinder stop (1) onto the cylinder rod.
5. Lower the feeder house until the header lift
cylinder stop touches the end of the header
lift cylinder.
GUID-5947162A-FAF4-4460-9853-8478D533C0E2-high.jpg [High]
Fig. 16
1.4.2 Disengaging the header lift cylinder stop
Procedure
1. Park the machine on a solid, level surface.
2. Put the transmission in neutral and apply the parking brake.
3. Raise the feeder house to full height.
4. Lift the header lift cylinder stop (1) from the
cylinder rod and engage the hook.
GUID-262968F9-A193-4CA8-9BD2-A9295B426FC3-high.jpg [High]
Fig. 17
[V]
GUID-5C4F56E8-EC40-4DDA-BA32-72AD42CA89F2 [V1]
GUID-A16D0A7E-545B-4331-A6A8-91F14427259B [V1]
1. General
1-14 3200 Series Corn Header
79037206A