urmet domus 1722/71 Instruction Manual

DS 1722-010C LBT 8546
Mod.
1722
SINGLE-FAMILY HANDS-FREE COLOUR VIDEO KIT WITH
VIDEO DOOR PHONE ANSWERING SERVICE
Ref. 1722/71
USER HANDBOOK
The CD supplied contains the handbook full version with traslation into Italian, English, French, German, Spanish and Polish.

2DS1722-010C
1 GENERAL DESCRIPTION
The Ref. 1722/71 video door phone kit is particularly easy to install as only two non-polarised wires are required for interconnection between the
power supply unit and video door phone and between the video door phone and call station.
System modularity permits implementation of various functions in addition to basic features including, for example, video surveillance, presence
control, activation of loads, etc. offering suitable solutions to all requirements.
System characteristics are as follows:
System
• Possibility of controlling up to 2 call stations with automatic switching;
• Possibility of controlling up to 4 video door phones (1 “Master” and 3 “Slave”) called in parallel;
• No local power supply required on call stations or “Slave” apartment stations;
• Simpliedprogrammingfromthe“Master”videodoorphoneviamulti-languageOSDmenu;
• AlldevicescomplywithECDirectivesonelectromagneticcompatibilityandwiththeLowVoltageDirective;
• The system is intrinsically protected against static and impulsive electromagnetic disturbances.
Call station
• Call station with Zama front panel resistant to atmospheric agents (IP44);
• Wide-anglecolourcallstationTVcameraandledilluminationofsubject;
• White back-lit name tag holder;
• Conrmationofcallforwardingwithacousticsignalandswitchingoffoftheback-lightingledofthenametag;
Apartment station
• Hands-free video door phone apartment stations with 4.3” colour screen;
• Soft-touch control and selection keys with acoustic echo;
• Hands-free or push-to-talk conversation mode:
Hands-free: pressing the audio key, the conversation is activated and then de-activated pressing the key again.
Push to talk: when the audio key is held down, it is possible to speak from apartment station, while releasing the key enables
listening.
• Up to 4 user-selectable call tones;
• Adjustablecallvolumewithcompletemuting(mutefunction);
• Drivingofvoicerepetitiondevicesforthehearing-impaired(ILA)inaccordancewithEuropeanLawSOCU0611477A.
Basic functions
• Videodoorphoneansweringserviceabletorecordupto32x10secondvideoclips;
• Possibility of sending a pre-recorded audio message to the caller ;
• Possibility of leaving an audio message on the “Master” video door phone for other system users;
• Activation of the electric lock with capacitive discharge and latching current and programmable activation time;
• Activation of the electric lock by moving the proximity keys provided close to the call station;
• Activation of a second lock (vehicle entrance);
• Pre-engineered for connection of a main entrance button for local activation of the electric lock;
• Activation of electric locks only after a call or after automatic activation;
• Possibility of automatic activation of the electric lock after a call (doctor’s surgery function);
• Cyclic auto-activation function on the call stations and on any surveillance cameras;
• Pre-engineered for switching on stair lights, driven by the video door phones with a dedicated button;
• Led-typeindicationofentrancedooropen.
Additional functions
• Group intercom call to all the other video door phones of the system;
• Possibility of assigning different call tunes to the intercom call and to that from the call stations;
• Possibility of connecting an additional ringer or wireless call repeater to each video door phone for repetition of all calls;
• Possibility of connecting a surveillance camera directly to the “Master” video door phone;
• Possibility of connecting up to 4 surveillance cameras using an optional video switching device;
• Pre-engineered for connection of intrusion sensors on the “Master” video door phone;
• Ledsignallingofentranceofapersonintheareamonitoredandemissionofanacoustictonebythevideodoorphone;
• Repetition of acoustic signalling of the presence of a person, or siren;
• ActivationofaTVcameraforlmingofimagesfollowingentranceofapersonintheareamonitored,withautomaticrecordingofa10-second
video clip.
•
•

DS1722-010C 3
2 PROGRAMMING AND FUNCTIONING
2.1 DESCRIPTION OF THE FRONT PANEL OF THE VIDEO DOOR PHONE
1
3
2
4
5
6
715
14 8
910111213
1. display
2. microphone
3. ringer muted indicator (Mute)
4. presence control active indicator
5. video door phone answering service status and message in memory indicator
6. door open and automatic door opener active indicator
7. door opener button
8. OSDmenunavigationbuttons
9. vehicle entrance door opener button
10. ringer muting button (Mute)
11. dataentryandsettingconrmationbutton
12. auto-ONbutton
13. stairlightONbutton
14. loudspeaker
15. audio activation/de-activation button
2.1.1 Led readouts on the video door phone
LED green steady greenashing red steady redashing green/redashing
“Master” video door phone
Dooropenerfunction
available
AudioON Audio activation
available
Call tone muted
Presence control
functionON
Presence control alarm
ON
Videodoorphone
answeringserviceON
Presence in the memory
of a new video recorded
automatically
Memory contains a new
audio message
Memory contains a
new video recorded
automatically and a new
audio message
Automatic door opening
active Dooropen Automatic door opening active with door open
“Slave” video door phone
Dooropenerfunction
available
AudioON Audio activation
available
Call tone muted
Dooropen

4DS1722-010C
2.2 PROGRAMMING TREE
With the video door phone in idle status, press the key to access the following programming menu:
PLAY
PLAY RECORDED
VIDEOCLIPS
VOICE MESSAGE
PLAYING
VOICE MESSAGE
RECORDING
KEYPAD
LOCK
REC
AUTO VIDEOCLIPS
SNAP OFF
SETTINGS
AUTO
AUTOMATIC DOOR
OPEN OFF
ALARM DETECTOR
OFF
CAMERA
UNITS
DATE / TIME
CHANGE
LANGUAGE
VOLUME
REGULATION
RING
TONES
PUSH BUTTON
PANEL NR.1
PUSH BUTTON
PANEL NR.2
INTERCOM
SERVICE
ALARM DETECTOR
SETTINGS
DEFAULT
EXTERNAL VOICE
MESSAGE OFF
EXTERNAL
MESSAGE
OFF
BEEP
OFF
RECORD EXTERNAL
VOICE MESSAGE
VIDEO DOORPHONE
SETTINGS
Display videos in memory
Play back audio messages in memory
Record audio message in memory
Locking of the keypad
Activation of video door phone answering service
Settings menu
Activation of automatic door opener
Activation of presence control
Programming of TV cameras
Video door phone settings
Adjustment of date and time
Setting of language
Adjustment of video door phone volumes
Call tone
Loudspeaker
Key beep
Selection of call ringer tones
Call station 1
Call station 2
Intercom call
Programming of presence control devices
Restore of factory settings
Setting of external audio message
Activation of message
Activation of beep after the external audio message for video door phone
answering service
Recording of message

DS1722-010C 5
2.3 GENERAL SETTINGS OF THE VIDEO DOOR PHONE
2.3.1 Adjustment of the time and date
• Press the key to switch on the video and access the main menu;
• Scroll the menu with the keys to highlight the icon
SETTINGS
, then press ;
• Scroll the menu with the keys to highlight the icon
VIDEO DOORPHONE
SETTINGS
, then press ;
• Scroll the menu with the keys to highlight the icon
DATE / TIME
, then press ;
• Thescreenpagewiththeeldsoftheday,month,year,hour and minutesisdisplayed:positionthecursorontheelddesiredwiththe
keys, then use the keys to increase or decrease the values displayed;
• Onexitingthescreenpage,thedateandtimewillbeupdated.
“Master” video door phone “Slave” video door phones
Available on: ¸˚
2.3.2 Adjustment of video door phone volumes
• Press the key to switch on the video and access the main menu;
• Scroll the menu with the keys to highlight the icon
SETTINGS
, then press ;
• Scroll the menu with the keys to highlight the icon
VIDEO DOORPHONE
SETTINGS
, then press ;
• Scroll the menu with the keys to highlight the icon
VOLUME
REGULATION
, then press ;
• The following screen page is displayed in which the keys can be used to increase or decrease the volume of each of the parameters:
ringer volume, internal audio volume (loudspeaker) and key beep;
The key beep key can only be activated or de-activated; volume cannot be modied.
RING VOLUME
VOLUME CONTROL
MIN MAX
MIN MAX
OFF ON
SPEAKER VOLUME
VOLUME KEY
• To move from one parameter to another, use the keys.
The following commands are also available in the screen page:
exit.
Accesses the on-line help that describes the main functions present in screen page.
To activate the commands, move the cursor (green icon) to the key desired using the arrows, then conrm with .
“Master” video door phone “Slave” video door phones
Available on: ¸ ¸
Remember that, during a communication, the volume of the loudspeaker of the video door phone can be adjusted pressing the arrow keys:
or to reduce volume and or to increase volume.
2.4 CALL MANAGEMENT
When the call button is pressed:
• TheledsoftheTVcameralightup(ifenabled);
• Thecallstationemitsaconrmationtone;
• Backlighting of the name tag holder switches off;
• The video door phones emit the call tone;
• TheimagesrecordedbytheTVcameraofthecallstationareshownonthemonitorofthe“Master”videodoorphoneandthegreen
key and the red key light up.
§
§
§

6DS1722-010C
If no key is pressed within 1 minute from the call, the video door phone returns to idle status.
Following a call, the operations listed below can be carried out on the “Master” video door phone:
• Activate audio with the key: after activating audio, the key changes to green and it is possible to converse with the caller for a maximum
of 3 minutes (the conversation can be interrupted at any time pressing the key again);
During the period in which audio is active, key beep is de-activated automatically so as not to disturb the conversation.
• Activate the electric lock of the entrance from which the call has been sent with the key;
• Activate the vehicle entrance door opener of the entrance from which the call has been sent with the key;
• Access the fast menu (see paragraph 2.5) pressing the key.
During a communication, the volume of the loudspeaker of the video door phone can be adjusted pressing the arrow keys: or to
reduce volume and or to increase volume.
2.4.1 Functioning with hearing aid
Thevideodoorphoneisttedwithadevicethatallowshearing-impairedpersonswearingahearingaidtohearthepersonspeakingfromthe
call station or from another video door phone in the case of intercom calls. The device is able to interface hearing aids with “T” function at a
distanceofaround20cm.
Set the selector
to Tmode
max 20cm
2.5 FAST ACCESS MENU
Duringavideodoorphonecallorauto-ON(seeparagraph2.10),pressingofthe key accesses the fast menu:
DATE: 26/10/10 TIME: 12:25
REC
2.5.1 Image adjustments.
If the commandisselectedinthe“fastmenu”screenpage,thefollowingscreenpageisoverlappedontheimageoftheTVcamera:
RESET
AUDIO VIDEO
SETTINGS
To move from one parameter to the next, use the keys; use the keys to increase or decrease the value of each parameter:
 adjustmentofthevolumeofthevideodoorphoneloudspeaker
 adjustmentofimagebrightness
§
§
§

DS1722-010C 7
 adjustmentofimagecontrast
 adjustmentofimagecolour
The following commands are also available in the screen page:
RESET restores the factory-set values of loudspeaker volume, brightness, contrast and colour
exit.
accesses the on-line help which describes the main functions present in the screen page.
To activate the commands, move the cursor (green icon) to the key desired using the arrows then conrm with .
2.6 VIDEO DOOR PHONE ANSWERING SERVICE
Thevideodoorphoneansweringservicemakesitpossibletorecord10-secondvideosfromanyofTVcameraspresentinthesystem(callstation
cameras or surveillance cameras). The recording can be made automatically following a call or manually.
To activate the answering service for automatic recording of images following a call:
• Press the key to switch on the video and access the main menu;
• Scroll the menu with the keys to highlight the icon
REC
AUTO VIDEOCLIPS
SNAP OFF
, then press ;
• ThecaptionundertheiconindicatesthatthevideodoorphoneansweringserviceisON:
SNAP OFF
AUTO VIDEOCLIPS
SNAP ON
AUTO VIDEOCLIPS
REC REC
• The ledlightsupingreensteadymode(inthecaseoflocalaudiomessagesnotyetlistenedto,theledswitchestoashingred).
Whenthefunctionisactive,followingacall,thevideodoorphonerecordsa10-secondaudioandvideomessagewithimagescomingfromthe
TVcameraofthestationfromwhichthecallhasbeenforwarded.
Recording of the video starts two seconds after sending of the call.
“Master” video door phone “Slave” video door phones
Available on: ¸˚
Recording can be interrupted pressing one of the following keys: , , . If recording is interrupted in the rst three seconds,
the video will not be saved.
For manual activation of recording, see paragraph 9.5 on the full manual.
2.7 DISPLAY OF VIDEOS IN THE MEMORY
Thevideodoorphoneisequippedwithamemoryabletocontainupto32x10-secondaudioandvideomessages.
If at least one video has been recorded automatically and has not yet been displayed, the ledswitchestoashinggreen(inthecaselocal
audiomessagesnotyetlistenedto,theledashesalternativelyinredandgreen).
To display the videos in the memory:
• Press the key to switch on the video and access the main menu;
• Scroll the menu with the keys to highlight the icon
PLAY
PLAY RECORDED
VIDEOCLIPS
, then press ;
• Therstphotogramoftherstvideoavailableisdisplayed;
VIDEOCLIP NR: 01/18 RECORDED ON: 26/10/10 AT: 12:58
Display sequence follows the order of recording, starting from the most recent video. If the limit of 32 videos is exceeded, the older videos
will be overwritten.
Variousinformationisdisplayedinthetoppartofthescreen:videonumber,totalnumberofvideosinthememory,dateandtimeofrecording.
§
§
§
§

8DS1722-010C
The following commands are available in the lower part:
selects the previous video.
starts display of the video; during display, a counter of the seconds of the video is started and the icon changes to with which it
is possible to suspend display.
selects the next video.
 blocksthevideo,preventingcancellationofthis;blockedvideosareidentiedbythe icon amongst the information in the top part of
the display. The same command can be used to unblock a blocked video.
eliminates the video: activating this command, the video selected can be cancelled or all the videos present in memory and not
blocked.
exit.
accesses the on-line help which describes the main functions of the various commands present in the screen page.
To activate the commands, move the cursor (green icon) to the key desired using the arrows then conrm with .
“Master” video door phone “Slave” video door phones
Available on: ¸˚
2.8 “LOCAL” AUDIO MESSAGES
On the “Master” video door phone, it is possible to leave audio messages for users who may return home during your absence. An audio
messageofmaximum20secondscanberecorded.
2.8.1 Recording
To record a new message:
• Press the key to switch on the video and access the main menu;
• Scroll the menu with the keys to highlight the icon
VOICE MESSAGE
RECORDING
, then press ;
• The recording screen page is displayed:
DATE: 26/10/10 TIME: 14:18
PRESS BUTTON AND TALK (MAX 20 SECONDS VOICE
MESSAGE)
00 20
INTERNAL VOICE
MESSAGE RECORDING
The following commands are available in the lower part of the screen page:
starts recording of the message, the central bar indicates the time remaining for the message; the icon changes to with which
it is possible to interrupt recording of the message before expiry of the maximum time allowed.
During recording, key beep is automatically disabled so as not to disturb the message.
 usedtoplaybackthemessagejustrecorded.
 eliminatesthemessagejustrecorded.
exit.
accesses the on-line help which describes the main functions of the various commands present in the screen page.
• On completion of recording, the  led on the front panel of the video door phone changes to ashing red (if a new video recorded
automaticallyispresent,theledashesalternativelyinredandgreen).
To activate the commands, move the cursor (green icon) to the key desired using the arrows then conrm with .
“Master” video door phone “Slave” video door phones
Available on: ¸˚
§
§
§

DS1722-010C 9
2.8.2 Playback
To listen to messages left by other users:
• Press the key to switch on the video and access the main menu;
• Scroll the menu with the keys to highlight the icon
VOICE MESSAGE
PLAYING
, then press ;
• The playback screen page is displayed with indication of the date and time at which the message was recorded;
The following commands are available in the lower part of the screen page:
starts audio playback of the message; the icon changes to with which it is possible to interrupt playback.
interrupts playback of the message.
eliminates the message.
exit.
accesses the on-line help which describes the main functions of the various commands present in the screen page.
• Following playback of the message, the led switches to red.
To activate the commands, move the cursor (green icon) to the key desired using the arrows then conrm with .
“Master” video door phone “Slave” video door phones
Available on: ¸˚
2.9 ACCESS CONTROL
2.9.1 Key memorisation procedure
Beep
Beep
Beep
Beep
Beep
Beep
1 32
2.9.2 Key cancellation procedure
Beeeeep
Beep
§

10 DS1722-010C
2.10 AUTO-ON FUNCTION
Pressing the button,theimageoftheTVcameraofthemaincallstationcanbedisplayedonthevideodoorphone.Ifthesystemcomprises
a second call station,pressingthekeyagain,theimagesoftheTVcameraoftheadditionalcallstationaredisplayed.
TV camera
call station 2
TV camera
call station 1
OFF
“Master” video door phone “Slave” video door phones
Available on: ¸ ¸
2.11 CALL TONE MUTING
To mute the call tone, press the key.
Muting of the call tone is indicated by the led which switches to green steady mode.
With this function active, in the case of a call, any additional ringers will also be muted but the video module of the “Master” video door
phone will switch on.
“Master” video door phone “Slave” video door phones
Available on: ¸ ¸
2.12 AUTOMATIC DOOR OPENING
With this function, a door open command is sent automatically when a call is received. This function is particularly useful for doctor’s surgeries
during surgery hours as patients can enter without any disturbance.
To activate the function:
• Press the key to switch on the video and access the main menu;
• Scroll the menu with the keys to highlight the icon
SETTINGS
, then press ;
• Scroll the menu with the keys to highlight the icon
AUTO
AUTOMATIC DOOR
OPEN OFF
, then press ;
• The caption under the icon indicates that the function is active:
OPEN OFF
AUTOMATIC DOOR
OPEN ON
AUTOMATIC DOOR
AUTO AUTO
• The ledswitchestoashinggreen(ifthedooropenalertisactiveatthesametime,theledashesalternativelyinredandgreen).
“Master” video door phone “Slave” video door phones
Available on: ¸˚
2.13 LOCKING OF THE KEYPAD
If it is necessary to clean the video door phone, in view of the extreme sensitivity of the soft touch keys on the front panel, it is advisable to lock
the keypad, proceeding as follows:
• Press the to switch on the video and access the main menu;
• Scroll the menu with the keys to highlight the icon
KEYPAD
LOCK
, then press ;
• Thekeypadwillremaininsensitiveforaround30secondsduringwhichaslidingbarisdisplayedtoindicatethetimeremaining
• After30seconds,thevideodoorphonereturnstoidlestatus;
If a call is received during the 30 seconds in which the keys are locked, the video door phone returns immediately to normal functioning.
“Master” video door phone “Slave” video door phones
Available on: ¸ ¸
2.14 RESTORE OF VIDEO DOOR PHONE DEFAULT PROGRAMMING
To restore the factory settings of the video door phone:
• Press the key to switch on the video and access the main menu;
• Scroll the menu with the keys to highlight the icon
SETTINGS
, then press ;
§
§

DS1722-010C 11
• Scroll the menu with the keys to highlight the icon
VIDEO DOORPHONE
SETTINGS
, then press ;
• Scroll the menu with the keys to highlight the icon
DEFAULT
, then press ;
• AscreenpageisdisplayedinwhichtheuserisrequestedtoconrmrestoreofthefactorysettingsbypositioningthecursoronYESorNO
andthenconrmingwith ;
• Followingconrmation,thevideodoorphoneaskstheusertoselectthelanguage(seethefullmanual).
Restore of factory settings also eliminates all the audio and video messages in the memory.
“Master” video door phone “Slave” video door phones
Available on: ¸ ¸
§

DS 1722-010C LBT 8546
Area tecnica
servizioclienti +39011.23.39.810
http://www.urmetdomus.com
e-mail: [email protected]
DesignedbyUrmet
Made in P.R.C.
URMET S.p.A.
10154TORINO(ITALY)
VIABOLOGNA188/C
Telef.  +39011.24.00.000(RIC.AUT.)
Fax  +39011.24.00.300-323