Anderson Double stretcher User manual

404644-4
Double stretcher for
800HS wrapper
Operator’s Manual
2018

Anderson Group Double Stretcher – Operator’s Manual 1
Table of contents
To contact us 3
Before you start 3
Anderson limited warranty 5
In this manual 9
1Introduction 11
2Safety and security measures 13
3Settings and Start-up 15
3.1 Before you start 15
3.2 Moving the wrapper 15
3.3 Positioning of the double stretcher for wrapping 15
4Settings 17
4.1 Adjustment for the height of the folding arm 17
4.2 The angle of the stainless steel arm compared to the frame of the wrapper
4.3 The angle of the stainless steel arm compared to the ground 19
5Installing the plastic roll 21
6Adjusting during the wrapping of the first bale 25
7Operation 27
8Maintenance and repairs 29
8.1 Cleaning 29
8.2 Adjusting the plastic cut and hold 29
9Transport and Storage 31
10 Trouble shooting and repair 33

Anderson Group Double Stretcher – Operator’s Manual 3
To contact us
When contacting Anderson please have the following information on hand:
•The model and serial number of the wrapper and the double stretcher;
•Your name, address and telephone number;
•Purchase date and the invoice number;
•The name, and address of the dealership; also the name of the salesman;
•Detailed description of the problem you are having with the wrapper.
You may contact our After Sales Service Department at the below:
Address: GROUPE ANDERSON
5125, rue de la Plaisance
Chesterville (Québec)
CANADA G0P 1J0
Telephone: [phone]
Fax: [phone]
Email: serv [e-mail]
Internet Site : www.grpanderson.com
Before you start
Before you start your Anderson machine, we strongly recommend that you:
•Read and understand the content of this manual;
•Read and understand the content of the 800HS wrapper’s manual;
•Follow all safety measures and security procedures in both this manual and the one
that came with your 800HS wrapper;
•Follow th e s tart up p rocedures in this m anual and the o ne that cam e w ith y our
800HS wrapper.
NOTE : This manual contains important information concerning the
maintenance and use of yo ur equipment. Please send this
manual w ith the w rapper if it i s sold or l ent to anoth er
person.
You are ready to start your Anderson machine.

Anderson Group Double Stretcher – Operator’s Manual 5
Anderson limited warranty
•The one-year warranty period begins on the date that the new eq uipment is sold to
the customer . If your equ ipment is u sed for co mmercial or rental purposes, th is
warranty w ill only be vali d for a period of 1 year or a maxi mum of 5000 bal es for
trailers, individual bale wrappers, and inline wrappers.
•If during the y ear fo llowing the purcha se of a new ma chine, yo ur Ander son
equipment f ails t o fu nction properly due to def ective des ign, materi als,
manufacturing, or assembly, our company will repair your equipment free of charge.
•Keep your original invoice or a photocopy. Please refer to your invoice whenever you
order parts, have questions about the operating procedures of your mac hine, or for
any questions you may have concerning your warranty.
•Replacement o r repair o f equ ipment par ts m ust be perfo rmed by an aut horized
Anderson deal er. This incl udes part s a nd l abour o nly. All wo rk mus t b e
preauthorized by the Anderson customer service department.
•The cu stomer w ill b e re sponsible for tra nsporting the eq uipment t o / from t he
authorized dealer.
•The dealer will describe the term s of this warranty to the customer before the retail
sale a nd wi ll reco rd t he da te of purc hase, the serial number, a nd t he equi pment
description.
•To have equ ipment repaired un der the wa rranty; t he cu stomer mu st advi se h is
dealer as s oon as po ssible of the pro blem and reques t that t he repai rs be made
according to the terms of the applicable warranty.
•Understanding that it is our desire to always improve on our products, our company
reserves the right to modify its machines, their characteristics, and their parts at any
time without advance notice or obligation.
•In no e vent w ill Anderson b e liab le f or any incidental or c onsequential d amages or
injuries, including but not limited to loss of profits, rental of substitute equipment, or
other com mercial or p ersonal lo ss or d amages arisi ng as a resu lt of a fund amental
breach or breach of a fundamental term.
Notwithstanding the foregoing

6 Double Stretcher – Operator’s Manual Anderson Group
Group Anderson Inc.
Warranty Policies, Procedures, & Provisions Summary
Purpose of Warranty:
The fundamental responsibility of warranty is to correct defects in material and workmanship of
the products sold by Group Anderson Inc. (hereafter called ‘’Anderson’’). This outline is
intended to a ssist yo u in aware ness o f A nderson’s Warranty Po licies and to assure that y ou
obtain the best service possible for your Anderson machine.
•Warranty is limited to 1-year (12months). This specified period begins on the date
the new equipment is sold to the customer.
•Warranty is non-transferable in the event of resale unless the resale is through an
authorized Anderson dealer.
Warranty Exemptions:
•Your warranty may be voided if Anderson determines that the equipment has been
subjected to bad treatment or negligence, has been used inappropriately, has not
received necessary maintenance, not been appropriately protected during storage,
damaged by vandalism, bad weather, natural elements, collision, or an accident.
•The warranty is void if your equipment has been modified in any way without
Anderson express authorization.
•The warranty does not cover towing expenses or service calls.
•No warranty is extended to regular service items such as fluids, paint, tires.
•Certain parts, such as the Honda engine and battery are covered under warranties
from their respective manufacturers. Details on these warranties can be obtained
from your dealer.
•Warranty does not cover damage caused by harsh weather conditions or unstable
ground conditions. Such as frozen parts on the equipment or performance issues on
inadequate terrain.
•No warranty is issued for performance issues. Including downtime and capacity
issues.
No Dealer Warranty:
•Except for conditions or warranties which may not be excluded by law, the selling
dealer makes no warranty of its own on any item warranted by Anderson Group
unless it delivers to the purchaser a separate written warranty document specifically
warranting the item. The selling dealer has no authority to make any representation
or promise on behalf of Anderson or to modify the terms or limitations of this
warranty in any way.

Anderson Group Double Stretcher – Operator’s Manual 7
Anderson’s Responsibilities:
•In the event that parts must be shipped from Anderson, freight will be paid by
Anderson and will be shipped by the most economical means to arrive in the shortest
possible time. Air, Next Day Air, Priority and other special shipment methods
requested by the Dealer will be at the Customer’s expense.
ANDERSON GROUP
5125 de la Plaisance
Chesterville (Québec)
CANADA G0P 1J0
PH: [phone]
EMAIL: [email protected]om

Anderson Group Double Stretcher – Operator’s Manual 9
In this manual
This manual will help you to understand how to use and maintenance your double stretcher for
the 800HS in a safe manner.
Discharge
Illustrations
The il lustrations in t his m anual are p resented as refere nces according t o th e availab le
information at the ti me of printing. Anderson Group reserves the right to modify its machines
without advance notice.
Important notices
Warning!
Warning messages!
Identify the i nformation w hich m ust be read to
avoid damaging the wrapper or the autopilot.
Danger!
Danger messages!
Identify th e i nformation which mu st be read to
avoid inj ury to person s or an imals. Not f ollowing
these messages may lead to serious injuries or even
death.
NOTE : These t ypes o f note s ser ve to p ass on ad ditional
information about the contents in which they are found.

Anderson Group Double Stretcher – Operator’s Manual 11
1Introduction
Congratulations! You are t he new owner of a double stretcher system f or a 800HS Anderson
wrapper, a quality machine built to allow your wrapper to wrap square and round bales at high
speed.
With the double stretcher, the 800HS wrapper can apply two layers of plastic at the same time
in a uniform manner. This will lower the cost of wrapping and the time it takes you as well. It
also is eq uipped wi th two hydraulic pl astic cut a nd ho ld sy stems, bui lt to cut a nd ho ld the
plastic between each bale.
The below image shows the double stretcher; installed on a 800HS wrapper.
Figure 1 – Double stretcher installed on 800HS

Anderson Group Double Stretcher – Operator’s Manual 13
2Safety and security measures
The double stretcher for your Anders on 800HS wrapper was conceived to minimize risks to the
operator. However you should never use it for any other purpose other than the one for which
it was conceived. Misuse of this option or any other on the wrapper may cause serious injuries
to the operator or other people nearby.
This section explains the appropriate security measures for the double stretcher of an Anderson
800HS wrapper.
Danger!
Be sure to re spect all of the security mea sures in
this sec tion t o ens ure the proper use of the
wrapper.
Quality and skills of the operator
Get y ourself acq uainted wi th the procedure s o f y our doubl e s tretcher bef ore you operate it.
Also be sure to insist that these procedures are followed by all those who use your wrapper.
Be sure that all of the operators:
•Are responsable people.
•Have received all of the necessary information to safely operate the wrapper / double
stretcher system.
•Are aware of the emergency telephone numbers for your area.
•Know where your first aid kit is located.
Use
Only u se the do uble stretcher t o wrap square bales of sp ecific dimension as w ritten in t he
owner’s manual of the 800HS. This option is not be uses for any other purpose.
Security perimeter
Do not allow yourself to be distracted while you are installing or op erating the wrapper. When
you are running t he wrapper y ou must be the only person around t he machine and be very
sure that there is no one in the rear of the machine.
Danger!
A 5 me ter security peri meter (15ft ) arou nd th e
machine in op eration m ust b e respec ted. Remove
all people, e specially ch ildren and pet s f rom the
site. Neglecting this warning may result in injury or
even death.

14 Double Stretcher – Operator’s Manual Anderson Group
Maintenance and repairs
Before making any repair or doing any maintenance on the mach ine or the double stretch er,
turn off the engine and remove the key from the contact. Also be sure that the wrapper is in a
stable position.

Anderson Group Double Stretcher – Operator’s Manual 15
3Settings and Start-up
This chapter des cribes the st ages o f prepara tion an d t he start u p o f th e do uble s tretcher
system of the 800HS wrapper.
Warning!
Please make sure to also follow the setup stages
described in the wrapper operator manual.
3.1 Before you start
Before operating your do uble stretcher, be sure that it is well greased and the rollers and the
folding arm are clean and have no defects (scratches).
3.2 Moving the wrapper
If needed, move your wrapper to the place you will be storing your bales.
Warning!
Before you m ove the wrapper for any re ason be
sure t hat th e double stretcher is locked in it s
transport po sition. ( section Error! Refer ence sou rce
not found.on page 31).
3.3 Positioning of the double stretcher for wrapping
Before beginning the wrapping of bales, place the double stretcher in the wrapping position by
proceeding as follows:
1. Remove the pin that holds the double stretcher arm in transport position.
2. Unlock the arm of the doubl e stretcher and put it in the wrapping po sition. The
angle of the arm should be less than 90° to the front of the wrapper.
3. Insert the pin into one of the holes for adjustment of the arm to hold it in place while
wrapping.
NOTE : The fix ing p oint on the arm of t he d ouble stre tcher
contains several holes which allow you to adjust for bales
of different dimensions. When y ou have adjusted the arm
to work for the type of bale you are wrapping, note which
hole you are using.

16 Double Stretcher – Operator’s Manual Anderson Group
Figure 2 – Adjustment of the double stretcher folding arm
4. Open t he h ydraulic va lve t o ac tivate the fo lding arm of the d ouble s tretcher. T he
valve is open when it is in the vertical position.
Warning!
Be sure t hat you are at a s afe dist ance from t he
folding arm. It may drop quickly and cause injury if
you are not careful.
Figure 3 – Opening the hydraulic valve

Anderson Group Double Stretcher – Operator’s Manual 17
4Settings
The plastic film must set correctly in t he cut and hold system so that it will function properly.
As it is the folding arm that d etermines the position that the film is p laced to be cut correctly
the following settings will serve to adjust this component:
•The height of the folding arm;
•The angle of the stainless steel arm compared to the ground.
It is best if all of these adjustments are carried out before putting on the roll of plastic.
Warning!
When you are running th e wrapper in manual
mode, it is po ssible that the folding arm may come
in co ntact w ith the receiv ing table of the wrapper.
To avoid collisions, completely raise the folding arm
before turning the table of the wrapper.
4.1 Adjustment for the height of the folding arm
To adjust the height of the folding arm s o the film sets correctly on the plastic cut and hold,
you have to first drop the folding arm as low as it will go.
To adjust the height of the folding arm, proceed as follows:
1. Turn off the computer to be able to manually control the double stretcher.
1. Start the engine of the wrapper.
2. By using the unloading lever (see Figure 4), lower the f olding arm until the drop off
panel begins to rise. Stop the arm (release the lever) in this position.
NOTE : The f olding arm o f t he do uble s tretcher is o n th e s ame
hydraulic cir cuit as the drop of f panel and the dumping
tablep (unloading platform). When y ou activate the lever
for the drop off the arm of th e double stretcher will lower
and push down on the pl astic film. Then the dr op off w ill
rise and the r otating table w ill dump the b ale f rom th e
wrapper.

18 Double Stretcher – Operator’s Manual Anderson Group
Figure 4 – Drop off lever (unloading platform)
3. Loosen both adjustment bolts as illustrated in Figure 5, then place the folding arm so
that it is at the same height or just a little lower than the plastic cut and hold so that
the plastic rests on it when it is installed. Tighten the bolts:
Figure 5 – Bolts for adjusting the folding arm