aoyue 853 User manual

Manufacturer:
AOYUE INTERNATIONAL LIMITED
Jishui Industrial Zone, Nantou, Zhongshan City,
Guangdong Province, P.R.China
http://www.aoyue.com
This appliance can be used by children aged from 8 years and above and persons
with reduced physical, sensory or mental capabilities or lack of experience and
knowledge if they have been given supervision or instruction concerning use of
the appliance in a safe way and understand the hazards involved. Children shall
not play with the appliance. Cleaning and user maintenance shall not be made by
children without supervision.
The specific instructions related to the safe operation of this appliance (as given
in 7.12 of this standard) shall be collated together in the front section of the user
instructions.
The height of the characters, measured on the capital letters, shall be at least 3
mm.
These instructions shall also available in an alternative format, e.g. on a website.
A fire may result if the appliance is not used with care, therefore:
→ be careful when using the appliance in places where there are combustible
materials ;
→ do not apply to the same place for a long time;
→ do not use in presence of an explosive atmosphere;
→ be aware that heat may be conducted to combustible materials that are out
of sight;
→ place the appliance on its stand after use and allow it to cool down before
storage;
→ do not leave the appliance unattended when it is switched on.
Rohs
Correct Disposal of this product
This marking indicates that this product should not be disposed
with other household wastes throughout the EU. To prevent
possible harm to the environment or human health from
uncontrolled waste disposal, recycle it responsibly to promote
the sustainable reuse of material resources. To return your used
device, please use the return and collection systems or contact
the retailer where the product was purchased. They can take
this product for environmental safe recycling.
853
PREHEA TER
Features:
Easy to stabilize steeples linear temperature control
Operates with carbonless brush DC motor for efficient
temperature heating and cooling stability.
The Stainless steel PCB working platform provides convenience
And concision in handling.
Best suited for preheating PCB and reworking large components.
(Recommended for use with model 968 repairing system)

І. Specifications:
Model: 853
Temperature Range: room temperature~300℃
Voltage: 220V/110V
Current: 2.1A
Power Consumption: 500W max
II. Package Listing
1 unit Preheating Station
1 pair of Magnetic Circuit Board Holder
1 Instruction Manual
III. Application:
Suitable for repairing, preheating and disordering
communication equipment and other advanced electronic PCBs.
IV. Operation
A. Preheating of Components
Turn on the power/cooler switch (red), cool air will then be
Automatically released continuously.
Set the temperature according to the components’ size and
Position the PCB on the board holder.
Turn on the heating switch (WARM). Hot air will be blown
Through the air conduit.
Caution:
Adjust temperature according to components’ and PCBs, size.
B. Cooling of Components
1. Place the component and PCB on the board holder.
2. Turn on the power/cooler switch (red) to start the
Cooling process.
Caution: Do not turn on the heating switch (WARM) during
The cooling process.