aoyue 853a+ User manual

Manufacturer:
AOYUE INTERNATIONAL LIMITED
Jishui Industrial Zone, Nantou, Zhongshan City,
Guangdong Province, P.R.China
http://www.aoyue.com
INT
AOYUE
®
INSTRUCTION MANUAL
Thank you for purchasing Aoyue Int853A+ Pre Heating System.
It is important to read the manual before using the equipment.
Please keep manual in accessible place for future reference.
853A+
Pre Heating System
®

2
TABLE OF CONTENTS
Features …………….……………………………………………… 3
Specifications /Package Inclusions …………………………... 4
Safety Precautions …………………………………………….… 5
Control Panel Guide …………………………………..………… 6
Operating Guidelines …………………………………..….. ….. 7
This manual is designed to familiarize and instruct the
operator with the proper usage and maintenance of the
equipment. The “Care and Safety Precautions” section
explains the hazards of using any type of soldering or
reworking device. Please read carefully and observe the
guidelines in order to maximize usage and minimize the
risk of injury or accidents .
7
IMPORTANT REMINDERS:
1. Make sure the equipment is placed on a flat stable surface.
2. Ensure all terminal connections are properly secured.
IMPORTANT: Please refer to the CONTROL PANEL GUIDE page for buttons and
display panel directory.
OPERATING GUIDELINES
1. Plug the device to the main power source using the power cord
provided in the package.
2. Switch ON the device by activating the main power switch located at
the back.
3. The display panel will show the actual temperature on the Actual
temperature display (“1” on control panel guide) while the set
temperature display (“2“ on control panel guide) would show “OFF”.
The system will remain at this state until the user activates a function.
The systems’ heating element is not activated at this state.
4. To start the heating function press the function activation button. (“3”
from the control panel guide)
5. The display would show the set temperature on the set temperature
display (“2” from the control panel guide). While the actual
temperature display (“1” from the control panel guide) would show the
actual temperature.
6. Adjust the set temperature using the increase and decrease set
temperature button.(“3&4” of the control panel guide).
7. Reflow soldering/ pre-heating process may be done when the desire
temperature has been reached.
8. To disable the heating element simply deactivate the heating function
by pressing the function button (“3” from the control panel guide).
The Actual temperature display would show the temperature of the
heater while the set temperature display would show the word “OFF”
indicating the heater is turned off.

6
CONTROL PANEL GUIDE
LEGEND:
1 — Actual Temperature Display
2 — Set Temperature Display
3 — Function Button
4 — Increase Set Temperature Button
5 — Decrease Set Temperature Button
1
2
3
6
On
Off
Main
Power Switch Fuse
AC plug
Back Panel
4
3
Features:
● Microprocessor-controlled equipment.
● Digital display of actual and set temperature.
● Digital tactile touch type controls for precision and ease of use.
● Integrated board holder.
● Advance grip type board holder with multi pivot and angled grip.
● Suitable for lead-free and standard processes.
FEATURES

4
PACCKAGE INCLUSIONS
MAIN STATION
Power Input : available in 110V / 220V
Station Dimensions: 190(w) x 155(h) x 265(d) mm
Weight: 1.85 Kg
Power Consumption: 500W
Temperature Range: 80°C - 380°C
Heating Element: Quartz Heater
SPECIFICATION
Specifications are subject to change without prior notice.
1 unit Int 853A+ Main Station
1 pc. Instruction Manual
1 pc. Power Cord 5
SAFETY PRECAUTIONS
CAUTION: Improper usage can cause serious injury to personnel
and/or damage to equipment. For your own safety, please observe
the ff. precautions.
● Check each component after opening the package to make sure
everything is in good condition. If there are any suspected damage,
do not use the item and report the issue to your vendor.
● Turn OFF the main power switch and unplug the device when
moving the device from one location to another.
● Do not strike or subject the main unit to physical shock. Use
carefully to avoid injury and damage to any part.
● Handle with care.
- Never drop or sharply jolt the unit.
- Contains delicate parts that may break if the unit is dropped.
● Make sure the equipment is always grounded. Always connect
power to a grounded receptacle.
● Temperature may reach as high as 380°C when switched ON.
- Do not use the device near flammable gases, paper and other
flammable materials.
- Do not touch heated parts, which can cause severe burns.
- Do not touch metallic parts near the tip.
● Disconnect the plug from the power source if the unit will not be
used for a long period.
- Turn off power during breaks, if possible.
● Use only genuine replacement parts.
- Turn off power and let the unit cool before replacing parts.
● The unit may produce a small amount of smoke and unusual odor
during initial usage. This is normal and should not yield any
negative result when reworking.
● Soldering process produces smoke — use on well ventilated place.
● Do not alter the unit, specifically the internal circuitry, in any
manner.