Touch
Card Key
Optional Accessories
10. Unlocking Door with Code
13. Opening Door(Inside/Outside)
14. Unlocking Door with Smart Etiquette
15. Locking the Door(Inside/Outside)
Palm touch
Contact
registered Card Key.
Enter the Code Palm touch Enter the
button
How to press set button of remote controller
: Press the set(registration) button located on the front of remote
controller.
You can press it using a pin like the picture.
7. Setting Menu
Normal Mode:
Without a designated person, anyone who knows ‘User PIN
Code’ has authority to set features.
Master Code:
Only a designated person who knows 'Master PIN Code' has
authority to set features.
Visitor Code: The visitor code is different from user code and given out to visitors only.
Onetime Code: The onetime code is used only once for unlocking the door lock
and automatically deleted after usage.
User Slot Number: It should be 2 digits(like ’01’, ‘02’…’99’, ‘00’) and available
in advanced mode.
Touch the Keypad of the Front Body with your palm to begin
Press button on the Keypad
Press button on the Keypad
Press (Registration) button in every steps to start or
complete the session
Enter User Card Key
(Up to 100EA)
Enter User Code
(4 ~ 10 digits)
Enter Master Code
(4 ~ 10 digits)
Enter Visitor Code
(Only 4 digits)
Enter Onetime Code
(Only 4 digits)
Rotation area to add more features
1. Front Body (Front Body, installation on the outside of the door) 4. Main Body (Main Body, installation on the inside of the door)
2. Basic Contents
3. Specifications
Front Body Main Body Lock Case
Basic Contents
※Battery life may vary depending on temperature, moisture levels, frequency of use and the quality of the batteries.
※Please make sure that all parts are included when purchasing the product.
※Optional products may not be abailable depending on you country or local dealer.
Operating temperature
-15~55˚C (5~131˚F)
4EA 1.5V AA Alkaline batteries
(Operating voltage: 4.5~6V)
wireless Optional
Parts Specifications Remarks
Front Body
Option Remote Controller
Main Body
Lever
Card Keys
Battery
Lock Case
72(W) X 344(H) X 30(D) mm
72(W) X 344(H) X 36(D) mm
Zinc die-casting
4 EA
Last up to 10 months
(10 times used a day)
Up to 100 keys
Steel and SUS304
8. Product Features
9. Normal Mode (Default Mode)
Normal mode is a convenient mode for anyone to set the digital door lock.
User can set password like user code, visitor code, onetime code and register
card keys as well. Factory default is a normal mode.
To disable Safe Handle Setting
To enable Safe Handle Setting
From Outside
From Inside
.Open the battery cover and take out
a hex wrench.
. Keep pushing the safe handle button.
.Turn the fixing screw clockwise to fix
the button.
.Open the battery cover and take out
a hex wrench.
.Turn the fixing screw anticlockwise
until the safe handle button comes out.
Press the lever handle down to open door
To open when Safe Handle Settings are enabled :
Keep pushing the safe handle button. And then,
Press the handle down to open the door.
To open when Safe Handle Settings are disabled :
Press the lever handle down and open the door.
Palm touch
for 3sec.
Enter the User PIN Code
then touch the keypad
with your palm
OR
Automatic Lock Mode(Inside/Outside)
Manual Lock Mode
In automatic lock mode, the lock automatically locked within
5 seconds after closing the door and detecting
the automatic lock sensor.
The door locks when touching the keypad with the palm.
(outside)
Use Thumb turn knob on the main body. (Inside)
11. Unlocking Door with Card Key
12. Safe Handle Feature
2
3
4
User Slot Number should be 2 digits
(like ‘01’ … ‘99’ and ‘00’: Location of 100th user slot must be assigned "00" instead of "100". )
Registr
-ation
Card Key Up to 100EA
Delete
Delete all card credentials
PIN CODE
U
PIN CODE
U
OR
Registr
-ation
Delete
Visitor Code
OR
OR
PIN CODE
U
PIN CODE
U
PIN CODE
V
Registr
-ation
Delete
Onetime Code Only 1EA, Automatically deleted after use
OR
OR
PIN CODE
U
PIN CODE
U
PIN CODE
O
Continue / Complete
Registr
-ation New
User Code
PIN CODE
U
12 (Registration process)
1
Registr
-ation
Delete
Remote Contoller
OR
OR
PIN CODE
U
PIN CODE
U
Button
SET
Registr
-ation
Delete
Home Network Controller
OR
OR
PIN CODE
U
PIN CODE
U
roller
Cont
YDM3115A
5
6
7
9
8
Yale Access Bluetooth App (Yale Access BLE module: optional item)
This service is an innovative solution provided by YALE. Using high-tech IoT technology,
user can access and unlock the digital door lock with your smartphone.
Smart Touchpad Automatic Locking
The automatic lock sensor detects the door closing and locks the door automatically
within 5 seconds. The door locks when touch the keypad with the palm.
As the automatic lock function does not work in manual lock mode, make sure to check
that the door is securely locked when leaving the premises.
3 minute Lock Out Feature
After five (5) unsuccessful attempts of an invalid code or card key, lock out mode is
activated for 3 minutes.
Smart Etiquette
When entering a pin code on the keypad, the user can open the door lock in silent mode.
Fake PIN Code
Security enhancement to enter any number before or after entering a password to prevent
the PIN code from being exposed.
Internal Forced Lock
It is a security-enhancing function that 'disables' authentication methods such
as passwords, RFID cards and fingerprints from outside when setting up functions indoors.
External Forced Lock
It is a security-enhancing function that an alarm goes off if someone opens door from inside
when setting up functions outside.
Other features and Benefits
•Remote Controller (Optional):
This option may not be available depending on your country or local dealer.
•Network Module/Controller (Optional):
It allows door lock to connect with Home network controller.
•Intrusion/Broken Alarm.
•Low Battery Alarm and Emergency Power Supply.
•User Manual
• Installation Guide
• AA Batteries X 4
• Card Keys X 4
• Mechanical Keys X 2
• Screws
• Remote Controller
• Remote Control
Module
• Bluetooth Module
5. Front Body
6. Main Body
1
Keypad(10-key)
2
Card Key reader
3
Dead Bolt Jam Lamp
4
Lever
6
Emergency Cover
7
Emergency Key
8
Emergency Power Supply Terminal
5
Battery Change Lamp
1
Battery Cover
2
Registration button
4
Manual Thumb Turn
5
1.5V AA Alkaline Batteries (4PCS)
6
Slot for Remote control module (Optional)
3
Lever
7
Volume Control Switch
8
Auto/Manual Lock Button
9
Safe Handle Button
Only 1EA
Only 1EA
Up to 5EA
OR
Registr
-ation
Bluetooth setting (Yale Access app)
PIN CODE
U
Please note the following when using Yale Access Bluetooth App.
- Depending on product type or FW version, app registration and door lock connection in normal mode may not
be possible, so if registration is not possible, change from normal mode to master mode and try again.
[ App Registration in Master Mode: Master Pin Code-> I (Registration Button)-> 7 -> # ]
- Because Yale Access Bluetooth App is only available in master mode, user code automatically changes to
master code when registering APP in normal mode.
- Please be informed that all registered credentials will be deleted when changing mode or registering and
deleting app.
Set up a new device in the app