Ballard Designs Toulouse Tall Bookcase User manual

PRODUCT NAME: Toulouse Tall Bookcase
ITEM NUMBER: MV314
DIMENSIONS OF ITEM ASSEMBLED: 84"H x 42 1/2"W x 15 3/4"D
PRODUCTS ARE NOT INTENDED
FOR COMMERCIAL USE. Page 1 of 5
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
MADE IN INDIA

Customer Service: 800-367-2810
Online: www.ballarddesigns.com Page 2 of 5
TOOLS NEEDED:
-Assembly requires 2 or more
people.
-Screwdriver required.
Ltr.
A 12 3/4” Screws
B 4 Bolts
C 4 Nuts
D 1 Wrench
Top Shelf (E)
Fixed Shelves (F)
Side Frames (H)
X- Shape Iron Back (I)
Shelf Supports (J)
Shelf Guards (K)
Anti Tip Kits (L)
Qty. Hardware Included
Ltr.
I 1
L 2
J 6
K 10
H 2
F 2
G 3
E 1
Qty. Components
Adjustable Shelves (G)
(Retention Belts)
(Brackets)
(Screws)

Page 3 of 5
STEP 1:
NOTE: This assembly requires the help of 2 or more people.
Attach the X-Shape Iron Back (I) to the Side Frames (H) by attaching one side at a time and
using Bolts (B) and Nuts (C). Tighten the Nuts with the Wrench (D). Make sure one person is
holding the Side Frames while the other tightens the Nuts.
STEP 2: With help, gently lay the assembled structure from STEP 1 on its side. Firmly tighten the
Top Shelf (E) using the Screws (A) to the Side Frames (H).Then, attach the Fixed Shelves (F)
to the bottom and middle bars of the Side Frames with Screws.
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
(H)
(H)
(I)
(B)
(D)
(C)
(E)
(A)
(H)
(F)

Page 4 of 5
STEP 3:
NOTE: This assembly requires the help of 2 or more people.
Stand Bookcase upright and insert Shelf Supports (J) with equal spacing into the
Side Frames (H) by inserting the front of the Support into a hole on the front bar of the
Side Frame and then sliding the back of the Support into the corresponding key hole in the
back bar of the Side Frame. Make sure the Shelf Supports are securely locked into place.
STEP 4: Lay the remaining Adjustable Shelves (G) on top of the Shelf Supports (J) with the notches
facing the front bars of the Side Frames (H). To get the Shelves in place you must tilt them
back and then, once they are in the correct position, lay them flat on the Supports.
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
(G)
(J)
(J)
(H)
(H)

Cleaning & Care:
Apply a very thin coat of wax with a soft cloth and keep away from direct sunlight.
Page 5 of 5
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
Wall
(M)(K)
(K)
(I)(G)(E)
(E)
(C)(A) (L)(J)(H)
(H)
(F)(D)(B)
STEP 5:
NOTE: This assembly requires the help of 2 or more people.
Insert Shelf Guards (K) equally between Shelves into the Side Frames (H) by inserting the
front of the Guard into a hole on the front bar of the Side Frame and then sliding the back of
the Guard into the corresponding key hole in the back bar of the Side Frame.
Anti Tip Installation: Screw the Brackets in the Anti Tip Kits (L) into studs in the wall with the Screws
2 Inches below the D-Rings already attached to the Bookcase. Align the Brackets vertically and
string in the Retention Belts. Confirm Straps are securely laced and locked.