Ballard Designs Casa Florentina Louis XVI Lingerie Chest... User manual

PRODUCT NAME: Louis XVI Lingerie Chest
ITEM NUMBER: MC035
DIMENSIONS OF ITEM ASSEMBLED:
56 3/4”H x 20 1/8”W x 18”D
This item is not intended for commercial use.
Made in Italy.
Page 1 of 2
2010 Ballard Designs, Inc.
www.ballarddesigns.com
800.367.2810
For Assembly Purposes:
-Assembly requires 2 or
more people.
-Requires a screwdriver.
-Legs inside of a drawer.
Check to ensure that you have the following:
Hardware Included
.ytQ.rtL
A
Part List
.ytQ.rtL
B 4 Legs
Anti Tip Kit1

STEP 1: Leg Assembly
Lay the Chest on it’s back to screw in all 4 Legs (B).
When setting the Chest upright,
DO NOT put uneven pressure on the Legs.
Page 2 of 2
2010 Ballard Designs, Inc.
www.ballarddesigns.com
800.367.2810
Cleaning & Care:
DO NOT use alcohol based products or spray polisher as they can damage the finish.
Dust with soft cloth. One to two times monthly apply beeswax polish as needed.
Finish can be affected by heat or extended contact with oils or wine.
(A)
STEP 2: Anti Tip Installation
Check to make sure bag contains all
necessary parts.
1.Attach bracket to back of furniture with 5/8”
screw through smaller bracket hole.
2.Screw in other bracket, with 2“ screw through
smaller hole, over a stud and 2” below
the bracket attached to the furniture.
3.Position furniture so brackets vertically align.
4. Lace restraint through larger bracket holes
and lock into place with no available slack.
5. Confirm strap is securely laced and locked.
Install Anti Tip Here
(B)