Ballard Designs Malvern ST430 User manual

PRODUCTS ARE NOT INTENDED
FOR COMMERCIAL USE.
UPDATED: 5-2-2019 Page 1 of 3
PRODUCT NAME: Malvern Stool
ITEM NUMBER: ST430
ASSEMBLED DIMENSIONS : 34.5” - 38.5”H x 18.5”W x 17”D
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
MADE IN INDIA

Customer Service: 800-367-2810
Online: www.ballarddesigns.com Page 2 of 3
Ltr.
A 4
B 4
Qty. Hardware Included
Ltr.
D
E
1
1
Qty. Components
C 4
TOOLS NEEDED:
Allen Wrench (Included)
-Two person assembly suggested.
Remove all parts, hardware and
protective packaging from carton
and carefully arrange on a clean,
level, padded surface.
NOTE: To avoid accidentally
discarding small parts or hardware,
retain all carton contents until
assembly and installation are complete.
F 1
Allen Bolt
Lock Washer
Flat Washer
Allen Wrench
Seat
Base

Page 3 of 3
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
STEP 1: On a soft surface, invert Seat (E) and attach Base (F) using Allen Bolt (A), Lock Washer (B),
and Flat Washer (C). Use Allen Wrench (D) to firmly tighen and secure Base to Seat.
Cleaning & Care:
DO NOT use alcohol based products or spray polisher as finish damage may result.
Clean using a soft cloth moistened with water and wipe dry.