Ballard Designs JM102 User manual

Prevent accidentally discarding small parts or
hardware. Retain all carton contents until assembly
and installation are complete.
PRODUCTS ARE NOT INTENDED
FOR COMMERCIAL USE.
UPDATED: 2-9-2021 Page 1 of 2
PRODUCT NAME: Marley Console Table
ITEM NUMBER: JM102
ASSEMBLED DIMENSIONS : 30"H x 48"W x 14"D
MADE IN INDIA
Customer Service: 800-367-2810
Online: www.ballarddesigns.com

Page 2 of 2
REQUIRED TOOLS:
Phillips Screwdriver
-Two person assembly suggested.
Remove all parts, hardware and
protective packaging from carton
and carefully arrange on a clean,
level, padded surface.
Console Table (D)
WARNING
Tip-Over Hazard
Prevent tipping accidents. Anchor your furniture.
ANCHORING HARDWARE INCLUDED
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
Assemble in location for intended use.
Cleaning and Care
Periodically dust with a soft, dry cloth.
Protect surfaces to prevent damage.
Do not use alchohol based cleaners or
polishers.
Anti-Tip Hardware Installation: Console is best supported when anchored to a Wall Stud. Move unit
into place then locate and mark at least one Wall Stud behind unit that aligns with a Leg. Place Wall
Bracket (C) over Stud and secure by driving Wood Screw (B) directly into Stud. Anchor Cosole to wall
by looping Retention Belt (A) around Leg and through Wall Bracket. Be certain Belt is laced and locked.
NOTE: Place bracket lower that Console top to hide from view after installation.