Ballard Designs Bohler SF044 User manual

PRODUCTS ARE NOT INTENDED
FOR COMMERCIAL USE.
UPDATED: 1/18/18 Page 1 of 4
PRODUCT NAME: Bohler Sideboard
ITEM NUMBER: SF044
DIMENSIONS OF ITEM ASSEMBLED: 36” H x 65” W x 15 3/4” D
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
MADE IN CHINA

Customer Service: 800-367-2810
Online: www.ballarddesigns.com Page 2 of 4
Ltr.
A 8
B
Shelf Supports
Anti-Tip Kits2
Qty. Hardware Included
Shelf (D) Hardware (A - C) Shelf (E)
Ltr.
DShelf (D)
Shelf (E)E
1
1
Qty. Components
C 4 Wood Plugs
TOOLS NEEDED:
-Requires a screwdriver
-Power drill suggested
-Two person assembly
suggested
NOTE: When unpacking, lay
the parts on a padded surface
such as the packaging provided.
Be sure to locate all hardware
before throwing away any
packaging. Assemble in
desired location for use.

Page 3 of 4
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
STEP 1:
(D,E)
(A)
(E)
(D)
Place the Shelf Supports (A) at the desired shelf heights and lay the Shelves (D, E) on
the Shelf Supports.
NOTE: Assemble in the desired location for use.
If the Sideboard is uneven, adjust the levelers inside the bottom corners of the Sideboard
using a flat head screwdriver. Turn clockwise or counterclockwise until the unit sits evenly.
Cover the leveler holes with the Wood Plugs (C).
STEP 2:
(C)

Page 4 of 4
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
Anti-Tip Installation: Part B
Attach a Bracket (H) to the back of the Sideboard with a Small Screw (F) through the
smaller hole. Then screw one of the remaining Brackets to the wall stud with a Large
Screw (G), 2 inches below the Bracket attached to the Sideboard. Repeat on the other
corner of the unit. Align the Brackets vertically and string in the Retention Belts (I).
Confirm the Belts are securely laced and locked.
STEP 4:
Retention Belts
Small Screws
Large Screws
Brackets
Ltr.
F
G
H
I
Qty. Hardware Included
4
2
2
2
Wall
(F)
(H)
(H)
(G)
(I)