Ballard Designs Nina MS080 User manual

PRODUCTS ARE NOT INTENDED
FOR COMMERCIAL USE.
UPDATED: 10/8/18 Page 1 of 4
PRODUCT NAME: Nina Apothecary Cabinet
ITEM NUMBER: MS080
DIMENSIONS OF ITEM ASSEMBLED: 40” H x 38.5” W x 12” D
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
MADE IN CHINA

Customer Service: 800-367-2810
Online: www.ballarddesigns.com Page 2 of 4
Ltr.
A 16 Shelf Supports Anti-Tip Kits
Qty. Ltr.
B 2
Qty.Hardware Included Hardware Included
Ltr.
C
Cabinet (C)
Shelves (D)
Shelf (D)
Hardware Located Here
D
1
4
Qty. Components
NOTE: When unpacking, lay the parts on a padded surface
such as the packaging provided. Be sure to locate all
hardware before throwing away any packaging.
TOOLS NEEDED:
-Two person assembly suggested.
-Requires a screwdriver.
NOTE: Assemble Cabinet in desired location for use.

Page 3 of 4
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
(D)
(C) (A)
(A)
STEP 1: If the floor is uneven, adjust the levelers located on the underside of the Legs. To do this,
lift up the side that needs to be elevated to provide access tp the levelers. Turn the leveler
clockwise or counterclockwise until the Cabinet makes adequate contact with the floor.
Insert the Shelf Supports (A) into the sides of the inside of the Cabinet (C) at the desired
shelf heights. Place the Shelves (D) onto the Shelf Supports.
STEP 2:
NOTE: Assemble Cabinet in desired location for use.

Page 4 of 4
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
Attach 2 Brackets (G) to the back of the Cabinet (C) with the Small Screws (E) through the
smaller holes. Screw the remaining Brackets (G) into a wall stud with the Large Screws (F)
2 inches below the Brackets attached to the Cabinet. Align the Brackets vertically and
string in the Retention Belts (H). Confirm Straps are securely laced and locked.
(F) (H)
(H)
(F)
(E)
(E)
(G)
(G)
Wall
Ltr.
E2 Small Screws
Retention Belts
Qty. Hardware Included
ANTI TIP INSTALLATION: PART B
F2 Large Screws
G4 Brackets
H2
NOTE: Assemble Cabinet in desired location for use.