Ballard Designs Giardino JC378 User manual

Prevent accidentally discarding small parts or
hardware. Retain all carton contents until assembly
and installation are complete.
PRODUCTS ARE NOT INTENDED
FOR COMMERCIAL USE.
UPDATED: 1-26-2021 Page 1 of 3
PRODUCT NAME: Giardino Rectangular Dining Table
ITEM NUMBER: JC378
ASSEMBLED DIMENSIONS : 29”H x 71”W x 38”D
MADE IN VIETNAM
Customer Service: 800-367-2810
Online: www.ballarddesigns.com

Page 2 of 3
REQUIRED TOOLS:
Allen Wrench (included)
Open End Wrench (included)
-Two person assembly suggested.
Remove all parts, hardware and
protective packaging from carton
and carefully arrange on a clean,
level, padded surface.
No.
Qty. Hardware Included
A 6
B 6
C 12
D 6
E 1
F
1
Allen Wrench
Open End Wrench
Ltr.
G
H
1
1
Qty. Components
Top (G)
Leg Assembly (H)
Cleaning and Care
Occasionally wipe or hose down to remove dirt and debris.
Promptly remove spills.
Do not use harsh chemicals or abrasive cleaners.
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
Assemble in location for intended use.
Lock Nuts (M6)
Allen Bolt (M6 x 30mm
Metal Washer (M6 x 16 x 2mm)
Plastic Washer (M6 x 16 x 2mm)

(H)
Page 3 of 3
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
STEP 1: Invert Top (G) onto a clean, level, padded surface. Orient Leg Assembly (H) onto Top, align
holes in Leg with holes in top.
STEP 2: Insert Allen Bolt (A) with Metal Washer (C) against Bolt Head through hole from outside to
inside Top. Add Plastic Washer (D) to Bolt then Leg Assembly (H). Add another Metal Washer (C)
followed by Lock Nut (B). Use Allen Wrench (E) and Open End Wrench (F) to fully tighten and secure.
(A) (C)
(F)
(B)
(D)
(E)
(G)
Assemble in location for intended use.