Ballard Designs SINCLAIRE MQ012 User manual

PRODUCT NAME: SINCLAIRE MEDIA CONSOLE
ITEM NUMBER:MQ012
DIMENSIONS OF ITEM ASSEMBLED: 26”H x 64”W X 16”D
PRODUCTS ARE NOT INTENDED
FOR COMMERCIAL USE.
UPDATE: 06/14/2018 Page 1 of 4
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
MADE IN CHINA

Customer Service: 800-367-2810
Online: www.ballarddesigns.com Page 2 of 4
TOOLS NEEDED:
-Requires a screwdriver.
-Power drill suggested.
-Assembly requires 2 or more people.
Hardware Located
Here (A-C)
Shelf (D)
Shelf (D)
Ltr.
D2
Qty. Components
NOTE: When unpacking, lay the parts on
a padded surface such as the packaging provided.
Be sure to locate all hardware before throwing
away any packaging.
NOTE: Assemble the Console in desired location for use.
Hardware Included
Shelf Supports
Ltr.
A
Qty.
8
B2 Anti Tip Kit
Wood Plugs C4

Page 3 of 4
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
STEP 1:Place the Shelf Supports (A) at the desired Shelf heights and lay the Shelves (D)
on the Supports.
NOTE: Assemble the Console in desired location for use.
STEP 2: If the Console is uneven, adjust the levelers inside the bottom corners of the Console by
using a flat head screwdriver. Turn clockwise or counterclockwise until the unit sits evenly.
Cover the leveler holes the the wood plugs (C).
(C)
D
A

Page 4 of 4
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
Wall
ANTI TIP INSTALLATION: PART B
(E)
(H)
(G)
(G)
(F)
Attach a Bracket (G) to the back of the Wine Rack with the Small Screw (E) through
the smaller hole. Then screw in the remaining Bracket (G) to the wall stud with the Large Screw (F)
2 inches below the Bracket attached to the furniture. Align the Brackets vertically and
string in the Retention Belt (H). Confirm Strap is securely laced and locked.
Ltr.
E
F
G Brackets
H
Qty. Hardware Included
2 Small Screw
2 Large Screw
4
2Retention Belt