BLK BOX 21-0169 User manual

OWNERS MANUAL & QUICK START GUIDE
DOUBLE BARBELL HANGER
NOTE : PLEASE READ ALL THE INSTRUCTIONS
CAREFULLY BEFORE ASSEMBLING THIS PRODUCT.
BLK BOX
PRODUCT SPECIFICATION
2kg
200mm x 104mm x 71mm
-
-
21-0169
#MADEINBELFAST
PRODUCT WEIGHT
DIMENSIONS

WARNING
xx
Nm
10MM MASONRY
DRILL BIT
TOOLS REQUIRED
17MM SPANNER X2
HAMMER
HAMMER DRILL
PARTS & ATTACHMENTS
No. Name SKU QTY
1 DOUBLE BARBELL HOLDER 20-0071 1
2 M10X80 SLEEVE ANCHOR 10-0031 2
3 M10 FLAT WASHER 10-0019 2
SERIOUS OR FATAL INJURIES MAY OCCUR FROM INCORRECTLY ASSEMBLED EQUIPMENT. ALWAYS ENSURE
BOLTS ARE TIGHTENED CORRECTLY AND ALL PARTS ARE LEVEL AND PLUMB. TO FURTHER REDUCE RISK OF
INJURIES OR DEATH PLEASE USE OUR SUGGESTED TOOLS AND PERSONAL PROTECTIVE EQUIPMENT (PPE).
WE SUGGEST THAT A MINIMUM OF THREE PEOPLE ARE INVOLVED IN THE ASSEMBLY OF THIS PRODUCT.
EACH PERSON SHOULD BE EQUIPPED WITH SAFETY GLASSES, STEEL TOE CAP BOOTS AND EAR PLUGS.
THIS SYMBOL IS AN INDICATION OF THE RECOMMENDED TORQUE EACH
BOLT SHOULD BE TIGHTENED TO. THIS VALUE WILL BE DEPENDENT ON
THE BOLT TYPE. PLEASE HAND TIGHTEN ALL BOLTS UNTIL YOU SEE THIS SYMBOL.
#MADEINBELFAST
1
2
3

#MADEINBELFAST
INSTALLATION
MEASURE, MARK AND DRILL HOLES USING GUIDES PROVIDED.
1
1800mm
CENTER LINE
150mm
200mm
-DRILL 10MM HOLE INTO THE WALL, 90MM DEEP
-VACUUM OUT THE DUST.
DRILL HOLE VACUUM
90MM
SLEEVE ANCHOR BOLT FITTING

2
-HAMMER SLEEVE ANCHOR INTO
THE HOLE.
-TIGHTEN SLEEVE ANCHOR TO
SPECIFIED TORQUE USING 13MM
SPANNER.
30
Nm
HAMMER IN
BOLT TIGHTEN
SLEEVE ANCHOR BOLT FITTING
#MADEINBELFAST
30
Nm
x2
ATTACH DOUBLE BARBELL HANGER (20-0071) TO THE WALL USING SLEEVE ANCHORS (10-0031)
AS SHOWN.
TIGHTEN ALL BOLTS TO SPECIFIED TORQUE.

1:1 SCALE FASTENERS
FOR TERMS AND CONDITIONS VISIT OUR WEBSITE AT
www.blkboxfitness.com/pages/terms-conditions
GET IN TOUCH
TEL: [phone]
EMAIL: [e-mail]
DISCOVER MORE AT:
www.blkboxfitness.com
M10x80 SLEEVE ANCHOR
10-0031
M10 FLAT WASHER
10-0019
#MADEINBELFAST

#MADEINBELFAST
THIS IS A BLANK PAGE

#MADEINBELFAST
THIS IS A BLANK PAGE