BLK BOX WALL MOUNTED PULL UP BAR User manual

OWNERS MANUAL & QUICK START GUIDE
WALL MOUNTED PULL UP BAR
NOTE : PLEASE READ ALL THE INSTRUCTIONS
CAREFULLY BEFORE ASSEMBLING THIS PRODUCT.
BLK BOX
PRODUCT SPECIFICATION
PRODUCT WEIGHT
MAX WEIGHT
DIMENSIONS
SAFE WORKING ZONE
-24.5kg
1080mm x 1300mm x 470mm
-
-
-
21-0225-0C-SK
2080mm x 1300mm x 2970mm
#MADEINBELFAST
300kg

WARNING
xx
Nm
10MM MASONRY
DRILL BIT
TOOLS REQUIRED
17MM SPANNER X2
HAMMER
PARTS & ATTACHMENTS
3
1
2
SERIOUS OR FATAL INJURIES MAY OCCUR FROM INCORRECTLY ASSEMBLED EQUIPMENT. ALWAYS ENSURE
BOLTS ARE TIGHTENED CORRECTLY AND ALL PARTS ARE LEVEL AND PLUMB. TO FURTHER REDUCE RISK OF
INJURIES OR DEATH PLEASE USE OUR SUGGESTED TOOLS AND PERSONAL PROTECTIVE EQUIPMENT (PPE).
WE SUGGEST THAT A MINIMUM OF THREE PEOPLE ARE INVOLVED IN THE ASSEMBLY OF THIS PRODUCT.
EACH PERSON SHOULD BE EQUIPPED WITH SAFETY GLASSES, STEEL TOE CAP BOOTS AND EAR PLUGS.
THIS SYMBOL IS AN INDICATION OF THE RECOMMENDED TORQUE EACH
BOLT SHOULD BE TIGHTENED TO. THIS VALUE WILL BE DEPENDENT ON
THE BOLT TYPE. PLEASE HAND TIGHTEN ALL BOLTS UNTIL YOU SEE THIS SYMBOL.
#MADEINBELFAST
HAMMER DRILL
VACUUM
6
45

INSTALLATION
1
BOLT 1QTY 1.2 BAR (21-0015-0A) BETWEEN 2QTY WALL MOUNTED PULL UP ARMS
(21-0226-0A) ENSURE ALL BOLTS ARE FACING INWARDS.
#MADEINBELFAST
x
4
10.0008
10.0019 X2
10.0024

#MADEINBELFAST
2
BOLT ASSEMBLY TO WALL USING 16 QTY SLEEVE ANHOR BOLTS (10.0031) AND 16QTY M10
WASHERS (10-0024) DRILL HOLES AND MOUNT USEING GUIDE AS SHOWN BELOW,
TIGHTEN ALL BOLTS TO SPESIFIED TORQUE.
30
Nm
DRILL HOLE VACUUM HAMMER IN
BOLT TIGHTEN
90MM
SLEEVE ANCHOR BOLT FITTING
-DRILL 10MM HOLE IN WALL, 90MM DEEP USING
PLATE AS A GUIDE.
-VACUUM OUT THE DUST.
-HAMMER SLEEVE ANCHOR INTO THE HOLE.
-TIGHTEN SLEEVE ANCHOR TO SPECIFIED TORQUE
USING 13MM SPANNER.
10.0031
10.0019
30
Nm
x 16

1:1 SCALE FASTENERS
FOR TERMS AND CONDITIONS VISIT OUR WEBSITE AT
www.blkboxfitness.com/pages/terms-conditions
GET IN TOUCH
TEL: [phone]
EMAIL: [e-mail]
DISCOVER MORE AT:
www.blkboxfitness.com
#MADEINBELFAST
M10x80 SLEEVE ANCHOR
10-0031
M10x90 BOLT
10-0008
NYLOCK NUT
10-0024
M10 FLAT WASHER
10-0019