BLK BOX SAMSON 21-0154 User manual

OWNERS MANUAL & QUICK START GUIDE
SAMSON FULL RACK
NOTE : PLEASE READ ALL THE INSTRUCTIONS
CAREFULLY BEFORE ASSEMBLING THIS PRODUCT.
BLK BOX
PRODUCT SPECIFICATION
PRODUCT WEIGHT
MAX USER WEIGHT
MAX TRAINING WEIGHT
DIMENSIONS
SAFE WORKING ZONE
-300kg
200kg
450kg
1960mm x 1360mm x 2550mm
-
-
-
21-0154
-2960mm x 2360mm x 3000mm
#MADEINBELFAST

WARNING
xx
Nm
SPIRIT LEVEL
10MM MASONRY
DRILL BIT
TOOLS REQUIRED
17MM SPANNER X2
13MM SPANNER
HAMMER
HAMMER DRILL VACUUM STEP LADDER
PARTS & ATTACHMENTS
No. Name SKU QTY
1 UPRIGHT WITH FEET
DNA80
21-0058 2
2 WESTSIDE UPRIGHT
WITH FEET DNA80
21-0059
21-0060
4
3 1.2 BRANDING BOX CM
DNA80
21-0047 1
4 1.2 BOX CM DNA80 21-0045 6
5 0.4 BOX CM DNA80 21-0043 4
6 1.2 SINGLE BAR CM
DNA80
21-0052 1
7 MULTIGRIPS 21-0165 1
8 M20X120 BOLT 10-0010 68
9 M10 FLAT WASHER 10-0019 18
10 M20 FLAT WASHER 10-0023 136
11 J-HOOKS PAIR 16-0002 1
12 M10X80 SLEEVE
ANCHOR
10-0031 18
13 M20 NYLOCK NUT 10-0028 68
14 SAMSON SAFETY
STRAPS
16-0003 1
15 UTILITY PEG 21-0234 8
1
2
3
4
6
11
8
12
10
9
SERIOUS OR FATAL INJURIES MAY OCCUR FROM INCORRECTLY ASSEMBLED EQUIPMENT. ALWAYS ENSURE
BOLTS ARE TIGHTENED CORRECTLY AND ALL PARTS ARE LEVEL AND PLUMB. TO FURTHER REDUCE RISK OF
INJURIES OR DEATH PLEASE USE OUR SUGGESTED TOOLS AND PERSONAL PROTECTIVE EQUIPMENT (PPE).
WE SUGGEST THAT A MINIMUM OF THREE PEOPLE ARE INVOLVED IN THE ASSEMBLY OF THIS PRODUCT.
EACH PERSON SHOULD BE EQUIPPED WITH SAFETY GLASSES, STEEL TOE CAP BOOTS AND EAR PLUGS.
PLEASE BE AWARE OF THIS SYMBOL AS AN INDICATION TO CHECK THAT A PART IS LEVEL
OR PLUMB.
THIS SYMBOL IS AN INDICATION OF THE RECOMMENDED TORQUE EACH
BOLT SHOULD BE TIGHTENED TO. THIS VALUE WILL BE DEPENDENT ON
THE BOLT TYPE. PLEASE HAND TIGHTEN ALL BOLTS UNTIL YOU SEE THIS SYMBOL.
#MADEINBELFAST
5
7
13
14
15

x
8
x
4
ASSEMBLY
1
BOLT 1QTY BRANDING BOX ( 21-0047 ) AND 1QTY 1.2 BOX ( 21-0045 ) BETWEEN 2QTY UP-
RIGHTS ( 21-0058 ) WITH BOLTS ASSEMBLY AS SHOWN. ENSURE LOGO ON BRANDING BOX
( 21-0047 ) IS FACING FORWARD, LOGOS ON UPRIGHTS ARE FACING OUT AND ALL BOLTS
FACING INWARDS.
10.0010
10.0023 x2
10.0028
10.0010
10.0023x2
10.0028
#MADEINBELFAST

2
BOLT 1QTY 1.2 SINGLE BAR ( 21-0052 ) BETWEEN 2QTY WESTSIDE UPRIGHTS ( 21-0059 & 21-0060 )
AND CONNECT TO EXISTING ASSEMBLY USING 4QTY 0.4 BOX ( 21-0043 ) WITH BOLT ASSEMBLY AS
SHOWN. ENSURE LOGO ON UPRIGHTS ARE FACING OUT AND BOLTS ARE FACING INWARD.
10.0010
10.0023 x2
10.0028
10.0010
10.0023 x2
10.0028
#MADEINBELFAST
x
4
x
4
x
1
0
x
4
x
4
x
4
x
1
0
x
4
x
4
x
4
x
1
0
x
4
x
4
x
4
x
1
0
x
4
10.0010
10.0023 x2
10.0028
10.0010
10.0023 x2
10.0028

3
BOLT 1QTY 1.2 BOX ( 21-0045 )TO 1QTY MULTIGRIPS ( 21-0165 ) AND BOLT BETWEEN 2QTY
UPRIGHTS ( 21-0059 & 21-0060 ) AND CONNECT TO EXISTING ASSEMBLY USING 4QTY BOX
1.2 BOX ( 21-0045 ) WITH BOLT ASSEMBLY AS SHOWN, ENSURE LOGO ON UPRIGHTS ARE
FACING OUT AND BOLTS ARE FACING INWARD.
10.0010
10.0023 x2
10.0028
10.0010
10.0023 x2
10.0028
10.0010
10.0023 x2
10.0028
#MADEINBELFAST
x
4
x
4
x
4
x
8
x
6
x
4
x
4
x
4
x
8
x
6
x
4
x
4
x
4
x
8
x
6
x
4
x
4
x
4
x
8
x
6
10.0010
10.0023 x2
10.0028

30
Nm
4
TIGHTEN ALL BOLT ASSEMBLIES TO SPECIFIED TORQUE. ENSURE ALL
UPRIGHTS ARE PLUMB. DRILL AND SECURE THE MIDDLE HOLE ON EACH UPRIGHT AS SHOWN
IN GUIDE. REMOVE ALL BOTTOM CROSSMEMBERS, DRILL AND SECURE REMAINING HOLES ON
UPRIGHTS AS SHOWN IN GUIDE. REATTACH THE BOTTOM CROSSMEMBERS .
10.0031
10.0019
DRILL HOLE VACUUM HAMMER IN
BOLT TIGHTEN
90MM
SLEEVE ANCHOR BOLT FITTING
-DRILL 10MM HOLE THROUGH FLOOR COVERING,
90MM DEEP USING PLATE AS A GUIDE.
-VACUUM OUT THE DUST.
-HAMMER SLEEVE ANCHOR DOWN INTO THE HOLE.
-TIGHTEN SLEEVE ANCHOR TO SPECIFIED TORQUE
USING 13MM SPANNER.
#MADEINBELFAST
80
Nm
x34
x
1
8
80
Nm

5
BOLT 8QTY UTILITY PEGS ( 21-0234 ) TO 2QTY UPRIGHTS ( 21-0058 ) WITH BOLT ASSEMBLY AS
SHOWN. ENSURE THEY ARE TIGHTENED TO 80NM.
#MADEINBELFAST

#MADEINBELFAST
1:1 SCALE FASTENERS
FOR TERMS AND CONDITIONS VISIT OUR WEBSITE AT
www.blkboxfitness.com/pages/terms-conditions
GET IN TOUCH
TEL: [phone]
EMAIL: [e-mail]
M10x80 SLEEVE ANCHOR
10-0031
M20x120 BOLT
M20 NYLOCK
NUT
M20 FLAT WASHER
DISCOVER MORE AT:
www.blkboxfitness.com
M10 FLAT WASHER